usb: gadget: langwell: drop langwell_otg support

Since there is no working (or even compilable) OTG_TRANSCEIVER support
for this driver, remove the dead code which depends on it at compile
time.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable@vger.kernel.org # v2.6.31+
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/gadget/langwell_udc.c

@@ -11,11 +11,6 @@
 /* #undef	DEBUG */
 /* #undef	VERBOSE_DEBUG */
 
-#if defined(CONFIG_USB_LANGWELL_OTG)
-#define	OTG_TRANSCEIVER
-#endif
-
-
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -2315,13 +2310,9 @@ static void handle_setup_packet(struct langwell_udc *dev,
 
 			if (!gadget_is_otg(&dev->gadget))
 				break;
-			else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
+			else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
 				dev->gadget.b_hnp_enable = 1;
-#ifdef	OTG_TRANSCEIVER
-				if (!dev->lotg->otg.default_a)
-					dev->lotg->hsm.b_hnp_enable = 1;
-#endif
-			} else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
+			else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
 				dev->gadget.a_hnp_support = 1;
 			else if (setup->bRequest ==
 					USB_DEVICE_A_ALT_HNP_SUPPORT)
@@ -2752,12 +2743,6 @@ static void handle_usb_reset(struct langwell_udc *dev)
 		dev->usb_state = USB_STATE_ATTACHED;
 	}
 
-#ifdef	OTG_TRANSCEIVER
-	/* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
-	if (!dev->lotg->otg.default_a)
-		dev->lotg->hsm.b_hnp_enable = 0;
-#endif
-
 	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
 }
 
@@ -2770,29 +2755,6 @@ static void handle_bus_suspend(struct langwell_udc *dev)
 	dev->resume_state = dev->usb_state;
 	dev->usb_state = USB_STATE_SUSPENDED;
 
-#ifdef	OTG_TRANSCEIVER
-	if (dev->lotg->otg.default_a) {
-		if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
-			dev->lotg->hsm.b_bus_suspend = 1;
-			/* notify transceiver the state changes */
-			if (spin_trylock(&dev->lotg->wq_lock)) {
-				langwell_update_transceiver();
-				spin_unlock(&dev->lotg->wq_lock);
-			}
-		}
-		dev->lotg->hsm.b_bus_suspend_vld++;
-	} else {
-		if (!dev->lotg->hsm.a_bus_suspend) {
-			dev->lotg->hsm.a_bus_suspend = 1;
-			/* notify transceiver the state changes */
-			if (spin_trylock(&dev->lotg->wq_lock)) {
-				langwell_update_transceiver();
-				spin_unlock(&dev->lotg->wq_lock);
-			}
-		}
-	}
-#endif
-
 	/* report suspend to the driver */
 	if (dev->driver) {
 		if (dev->driver->suspend) {
@@ -2823,11 +2785,6 @@ static void handle_bus_resume(struct langwell_udc *dev)
 	if (dev->pdev->device != 0x0829)
 		langwell_phy_low_power(dev, 0);
 
-#ifdef	OTG_TRANSCEIVER
-	if (dev->lotg->otg.default_a == 0)
-		dev->lotg->hsm.a_bus_suspend = 0;
-#endif
-
 	/* report resume to the driver */
 	if (dev->driver) {
 		if (dev->driver->resume) {
@@ -3020,7 +2977,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 
 	dev->done = &done;
 
-#ifndef	OTG_TRANSCEIVER
 	/* free dTD dma_pool and dQH */
 	if (dev->dtd_pool)
 		dma_pool_destroy(dev->dtd_pool);
@@ -3032,7 +2988,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 	/* release SRAM caching */
 	if (dev->has_sram && dev->got_sram)
 		sram_deinit(dev);
-#endif
 
 	if (dev->status_req) {
 		kfree(dev->status_req->req.buf);
@@ -3045,7 +3000,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 	if (dev->got_irq)
 		free_irq(pdev->irq, dev);
 
-#ifndef	OTG_TRANSCEIVER
 	if (dev->cap_regs)
 		iounmap(dev->cap_regs);
 
@@ -3055,13 +3009,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 
 	if (dev->enabled)
 		pci_disable_device(pdev);
-#else
-	if (dev->transceiver) {
-		otg_put_transceiver(dev->transceiver);
-		dev->transceiver = NULL;
-		dev->lotg = NULL;
-	}
-#endif
 
 	dev->cap_regs = NULL;
 
@@ -3072,9 +3019,7 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 	device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
 	device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
 
-#ifndef	OTG_TRANSCEIVER
 	pci_set_drvdata(pdev, NULL);
-#endif
 
 	/* free dev, wait for the release() finished */
 	wait_for_completion(&done);
@@ -3089,9 +3034,7 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 		const struct pci_device_id *id)
 {
 	struct langwell_udc	*dev;
-#ifndef	OTG_TRANSCEIVER
 	unsigned long		resource, len;
-#endif
 	void			__iomem *base = NULL;
 	size_t			size;
 	int			retval;
@@ -3109,16 +3052,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	dev->pdev = pdev;
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
-#ifdef	OTG_TRANSCEIVER
-	/* PCI device is already enabled by otg_transceiver driver */
-	dev->enabled = 1;
-
-	/* mem region and register base */
-	dev->region = 1;
-	dev->transceiver = otg_get_transceiver();
-	dev->lotg = otg_to_langwell(dev->transceiver);
-	base = dev->lotg->regs;
-#else
 	pci_set_drvdata(pdev, dev);
 
 	/* now all the pci goodies ... */
@@ -3139,7 +3072,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	dev->region = 1;
 
 	base = ioremap_nocache(resource, len);
-#endif
 	if (base == NULL) {
 		dev_err(&dev->pdev->dev, "can't map memory\n");
 		retval = -EFAULT;
@@ -3163,7 +3095,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	dev->got_sram = 0;
 	dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram);
 
-#ifndef	OTG_TRANSCEIVER
 	/* enable SRAM caching if detected */
 	if (dev->has_sram && !dev->got_sram)
 		sram_init(dev);
@@ -3182,7 +3113,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 		goto error;
 	}
 	dev->got_irq = 1;
-#endif
 
 	/* set stopped bit */
 	dev->stopped = 1;
@@ -3257,10 +3187,8 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	dev->remote_wakeup = 0;
 	dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
 
-#ifndef	OTG_TRANSCEIVER
 	/* reset device controller */
 	langwell_udc_reset(dev);
-#endif
 
 	/* initialize gadget structure */
 	dev->gadget.ops = &langwell_ops;	/* usb_gadget_ops */
@@ -3268,9 +3196,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	INIT_LIST_HEAD(&dev->gadget.ep_list);	/* ep_list */
 	dev->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
 	dev->gadget.max_speed = USB_SPEED_HIGH;	/* support dual speed */
-#ifdef	OTG_TRANSCEIVER
-	dev->gadget.is_otg = 1;			/* support otg mode */
-#endif
 
 	/* the "gadget" abstracts/virtualizes the controller */
 	dev_set_name(&dev->gadget.dev, "gadget");
@@ -3282,10 +3207,8 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	/* controller endpoints reinit */
 	eps_reinit(dev);
 
-#ifndef	OTG_TRANSCEIVER
 	/* reset ep0 dQH and endptctrl */
 	ep0_reset(dev);
-#endif
 
 	/* create dTD dma_pool resource */
 	dev->dtd_pool = dma_pool_create("langwell_dtd",
@@ -3525,22 +3448,14 @@ static struct pci_driver langwell_pci_driver = {
 
 static int __init init(void)
 {
-#ifdef	OTG_TRANSCEIVER
-	return langwell_register_peripheral(&langwell_pci_driver);
-#else
 	return pci_register_driver(&langwell_pci_driver);
-#endif
 }
 module_init(init);
 
 
 static void __exit cleanup(void)
 {
-#ifdef	OTG_TRANSCEIVER
-	return langwell_unregister_peripheral(&langwell_pci_driver);
-#else
 	pci_unregister_driver(&langwell_pci_driver);
-#endif
 }
 module_exit(cleanup);
 

drivers/usb/gadget/langwell_udc.h

@@ -8,7 +8,6 @@
  */
 
 #include <linux/usb/langwell_udc.h>
-#include <linux/usb/langwell_otg.h>
 
 /*-------------------------------------------------------------------------*/