Commit 28bec7b8 authored by Nikolay Ledovskikh's avatar Nikolay Ledovskikh Committed by John W. Linville

ath5k: Correct channel setting for AR2317 chip

Correct channel setting function must be used for AR2317.
When I tested ahb patch on bullet2 all seemed to work fine,
but it couldn't connect another host (using ibss for example).
During an analysis I observed that it's transmitting on another
channel. I looked into madwifi code and understood that
the problem is in channel setting function. So atheros RF2317 not
fully handled in the current ath5k version and must be patched.
Signed-off-by: default avatarNikolay Ledovskikh <nledovskikh@gmail.com>
Acked-by: default avatarBob Copeland <me@bobcopeland.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 00781a74
...@@ -1253,6 +1253,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah, ...@@ -1253,6 +1253,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah,
case AR5K_RF5111: case AR5K_RF5111:
ret = ath5k_hw_rf5111_channel(ah, channel); ret = ath5k_hw_rf5111_channel(ah, channel);
break; break;
case AR5K_RF2317:
case AR5K_RF2425: case AR5K_RF2425:
ret = ath5k_hw_rf2425_channel(ah, channel); ret = ath5k_hw_rf2425_channel(ah, channel);
break; break;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment