Commit 28da7be5 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'mailbox-v4.17' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox updates from Jassi Brar:

 - New Hi3660 mailbox driver

 - Fix TEGRA Kconfig warning

 - Broadcom: use dma_pool_zalloc instead of dma_pool_alloc+memset

* tag 'mailbox-v4.17' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: Add support for Hi3660 mailbox
  dt-bindings: mailbox: Introduce Hi3660 controller binding
  mailbox: tegra: relax TEGRA_HSP_MBOX Kconfig dependencies
  maillbox: bcm-flexrm-mailbox: Use dma_pool_zalloc()
parents 9eda2d2d 41c0e939
Hisilicon Hi3660 Mailbox Controller
Hisilicon Hi3660 mailbox controller supports up to 32 channels. Messages
are passed between processors, including application & communication
processors, MCU, HIFI, etc. Each channel is unidirectional and accessed
by using MMIO registers; it supports maximum to 8 words message.
Controller
----------
Required properties:
- compatible: : Shall be "hisilicon,hi3660-mbox"
- reg: : Offset and length of the device's register set
- #mbox-cells: : Must be 3
<&phandle channel dst_irq ack_irq>
phandle : Label name of controller
channel : Channel number
dst_irq : Remote interrupt vector
ack_irq : Local interrupt vector
- interrupts: : Contains the two IRQ lines for mailbox.
Example:
mailbox: mailbox@e896b000 {
compatible = "hisilicon,hi3660-mbox";
reg = <0x0 0xe896b000 0x0 0x1000>;
interrupts = <0x0 0xc0 0x4>,
<0x0 0xc1 0x4>;
#mbox-cells = <3>;
};
Client
------
Required properties:
- compatible : See the client docs
- mboxes : Standard property to specify a Mailbox (See ./mailbox.txt)
Cells must match 'mbox-cells' (See Controller docs above)
Optional properties
- mbox-names : Name given to channels seen in the 'mboxes' property.
Example:
stub_clock: stub_clock@e896b500 {
compatible = "hisilicon,hi3660-stub-clk";
reg = <0x0 0xe896b500 0x0 0x0100>;
#clock-cells = <1>;
mboxes = <&mailbox 13 3 0>;
};
......@@ -108,6 +108,14 @@ config TI_MESSAGE_MANAGER
multiple processors within the SoC. Select this driver if your
platform has support for the hardware block.
config HI3660_MBOX
tristate "Hi3660 Mailbox"
depends on ARCH_HISI && OF
help
An implementation of the hi3660 mailbox. It is used to send message
between application processors and other processors/MCU/DSP. Select
Y here if you want to use Hi3660 mailbox controller.
config HI6220_MBOX
tristate "Hi6220 Mailbox"
depends on ARCH_HISI
......@@ -134,7 +142,7 @@ config QCOM_APCS_IPC
config TEGRA_HSP_MBOX
bool "Tegra HSP (Hardware Synchronization Primitives) Driver"
depends on ARCH_TEGRA_186_SOC
depends on ARCH_TEGRA
help
The Tegra HSP driver is used for the interprocessor communication
between different remote processors and host processors on Tegra186
......
......@@ -27,6 +27,8 @@ obj-$(CONFIG_TI_MESSAGE_MANAGER) += ti-msgmgr.o
obj-$(CONFIG_XGENE_SLIMPRO_MBOX) += mailbox-xgene-slimpro.o
obj-$(CONFIG_HI3660_MBOX) += hi3660-mailbox.o
obj-$(CONFIG_HI6220_MBOX) += hi6220-mailbox.o
obj-$(CONFIG_BCM_PDC_MBOX) += bcm-pdc-mailbox.o
......
......@@ -1268,7 +1268,7 @@ static int flexrm_startup(struct mbox_chan *chan)
}
/* Allocate completion memory */
ring->cmpl_base = dma_pool_alloc(ring->mbox->cmpl_pool,
ring->cmpl_base = dma_pool_zalloc(ring->mbox->cmpl_pool,
GFP_KERNEL, &ring->cmpl_dma_base);
if (!ring->cmpl_base) {
dev_err(ring->mbox->dev,
......@@ -1277,7 +1277,6 @@ static int flexrm_startup(struct mbox_chan *chan)
ret = -ENOMEM;
goto fail_free_bd_memory;
}
memset(ring->cmpl_base, 0, RING_CMPL_SIZE);
/* Request IRQ */
if (ring->irq == UINT_MAX) {
......
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2017-2018 Hisilicon Limited.
// Copyright (c) 2017-2018 Linaro Limited.
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/mailbox_controller.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "mailbox.h"
#define MBOX_CHAN_MAX 32
#define MBOX_RX 0x0
#define MBOX_TX 0x1
#define MBOX_BASE(mbox, ch) ((mbox)->base + ((ch) * 0x40))
#define MBOX_SRC_REG 0x00
#define MBOX_DST_REG 0x04
#define MBOX_DCLR_REG 0x08
#define MBOX_DSTAT_REG 0x0c
#define MBOX_MODE_REG 0x10
#define MBOX_IMASK_REG 0x14
#define MBOX_ICLR_REG 0x18
#define MBOX_SEND_REG 0x1c
#define MBOX_DATA_REG 0x20
#define MBOX_IPC_LOCK_REG 0xa00
#define MBOX_IPC_UNLOCK 0x1acce551
#define MBOX_AUTOMATIC_ACK 1
#define MBOX_STATE_IDLE BIT(4)
#define MBOX_STATE_ACK BIT(7)
#define MBOX_MSG_LEN 8
/**
* Hi3660 mailbox channel information
*
* A channel can be used for TX or RX, it can trigger remote
* processor interrupt to notify remote processor and can receive
* interrupt if has incoming message.
*
* @dst_irq: Interrupt vector for remote processor
* @ack_irq: Interrupt vector for local processor
*/
struct hi3660_chan_info {
unsigned int dst_irq;
unsigned int ack_irq;
};
/**
* Hi3660 mailbox controller data
*
* Mailbox controller includes 32 channels and can allocate
* channel for message transferring.
*
* @dev: Device to which it is attached
* @base: Base address of the register mapping region
* @chan: Representation of channels in mailbox controller
* @mchan: Representation of channel info
* @controller: Representation of a communication channel controller
*/
struct hi3660_mbox {
struct device *dev;
void __iomem *base;
struct mbox_chan chan[MBOX_CHAN_MAX];
struct hi3660_chan_info mchan[MBOX_CHAN_MAX];
struct mbox_controller controller;
};
static struct hi3660_mbox *to_hi3660_mbox(struct mbox_controller *mbox)
{
return container_of(mbox, struct hi3660_mbox, controller);
}
static int hi3660_mbox_check_state(struct mbox_chan *chan)
{
unsigned long ch = (unsigned long)chan->con_priv;
struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
struct hi3660_chan_info *mchan = &mbox->mchan[ch];
void __iomem *base = MBOX_BASE(mbox, ch);
unsigned long val;
unsigned int ret;
/* Mailbox is idle so directly bail out */
if (readl(base + MBOX_MODE_REG) & MBOX_STATE_IDLE)
return 0;
/* Wait for acknowledge from remote */
ret = readx_poll_timeout_atomic(readl, base + MBOX_MODE_REG,
val, (val & MBOX_STATE_ACK), 1000, 300000);
if (ret) {
dev_err(mbox->dev, "%s: timeout for receiving ack\n", __func__);
return ret;
}
/* Ensure channel is released */
writel(0xffffffff, base + MBOX_IMASK_REG);
writel(BIT(mchan->ack_irq), base + MBOX_SRC_REG);
return 0;
}
static int hi3660_mbox_unlock(struct mbox_chan *chan)
{
struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
unsigned int val, retry = 3;
do {
writel(MBOX_IPC_UNLOCK, mbox->base + MBOX_IPC_LOCK_REG);
val = readl(mbox->base + MBOX_IPC_LOCK_REG);
if (!val)
break;
udelay(10);
} while (retry--);
if (val)
dev_err(mbox->dev, "%s: failed to unlock mailbox\n", __func__);
return (!val) ? 0 : -ETIMEDOUT;
}
static int hi3660_mbox_acquire_channel(struct mbox_chan *chan)
{
unsigned long ch = (unsigned long)chan->con_priv;
struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
struct hi3660_chan_info *mchan = &mbox->mchan[ch];
void __iomem *base = MBOX_BASE(mbox, ch);
unsigned int val, retry;
for (retry = 10; retry; retry--) {
/* Check if channel is in idle state */
if (readl(base + MBOX_MODE_REG) & MBOX_STATE_IDLE) {
writel(BIT(mchan->ack_irq), base + MBOX_SRC_REG);
/* Check ack bit has been set successfully */
val = readl(base + MBOX_SRC_REG);
if (val & BIT(mchan->ack_irq))
break;
}
}
if (!retry)
dev_err(mbox->dev, "%s: failed to acquire channel\n", __func__);
return retry ? 0 : -ETIMEDOUT;
}
static int hi3660_mbox_startup(struct mbox_chan *chan)
{
int ret;
ret = hi3660_mbox_check_state(chan);
if (ret)
return ret;
ret = hi3660_mbox_unlock(chan);
if (ret)
return ret;
ret = hi3660_mbox_acquire_channel(chan);
if (ret)
return ret;
return 0;
}
static int hi3660_mbox_send_data(struct mbox_chan *chan, void *msg)
{
unsigned long ch = (unsigned long)chan->con_priv;
struct hi3660_mbox *mbox = to_hi3660_mbox(chan->mbox);
struct hi3660_chan_info *mchan = &mbox->mchan[ch];
void __iomem *base = MBOX_BASE(mbox, ch);
u32 *buf = msg;
unsigned int i;
/* Ensure channel is released */
writel_relaxed(0xffffffff, base + MBOX_IMASK_REG);
writel_relaxed(BIT(mchan->ack_irq), base + MBOX_SRC_REG);
/* Clear mask for destination interrupt */
writel_relaxed(~BIT(mchan->dst_irq), base + MBOX_IMASK_REG);
/* Config destination for interrupt vector */
writel_relaxed(BIT(mchan->dst_irq), base + MBOX_DST_REG);
/* Automatic acknowledge mode */
writel_relaxed(MBOX_AUTOMATIC_ACK, base + MBOX_MODE_REG);
/* Fill message data */
for (i = 0; i < MBOX_MSG_LEN; i++)
writel_relaxed(buf[i], base + MBOX_DATA_REG + i * 4);
/* Trigger data transferring */
writel(BIT(mchan->ack_irq), base + MBOX_SEND_REG);
return 0;
}
static struct mbox_chan_ops hi3660_mbox_ops = {
.startup = hi3660_mbox_startup,
.send_data = hi3660_mbox_send_data,
};
static struct mbox_chan *hi3660_mbox_xlate(struct mbox_controller *controller,
const struct of_phandle_args *spec)
{
struct hi3660_mbox *mbox = to_hi3660_mbox(controller);
struct hi3660_chan_info *mchan;
unsigned int ch = spec->args[0];
if (ch >= MBOX_CHAN_MAX) {
dev_err(mbox->dev, "Invalid channel idx %d\n", ch);
return ERR_PTR(-EINVAL);
}
mchan = &mbox->mchan[ch];
mchan->dst_irq = spec->args[1];
mchan->ack_irq = spec->args[2];
return &mbox->chan[ch];
}
static const struct of_device_id hi3660_mbox_of_match[] = {
{ .compatible = "hisilicon,hi3660-mbox", },
{},
};
MODULE_DEVICE_TABLE(of, hi3660_mbox_of_match);
static int hi3660_mbox_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct hi3660_mbox *mbox;
struct mbox_chan *chan;
struct resource *res;
unsigned long ch;
int err;
mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
if (!mbox)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mbox->base = devm_ioremap_resource(dev, res);
if (IS_ERR(mbox->base))
return PTR_ERR(mbox->base);
mbox->dev = dev;
mbox->controller.dev = dev;
mbox->controller.chans = mbox->chan;
mbox->controller.num_chans = MBOX_CHAN_MAX;
mbox->controller.ops = &hi3660_mbox_ops;
mbox->controller.of_xlate = hi3660_mbox_xlate;
/* Initialize mailbox channel data */
chan = mbox->chan;
for (ch = 0; ch < MBOX_CHAN_MAX; ch++)
chan[ch].con_priv = (void *)ch;
err = mbox_controller_register(&mbox->controller);
if (err) {
dev_err(dev, "Failed to register mailbox %d\n", err);
return err;
}
platform_set_drvdata(pdev, mbox);
dev_info(dev, "Mailbox enabled\n");
return 0;
}
static int hi3660_mbox_remove(struct platform_device *pdev)
{
struct hi3660_mbox *mbox = platform_get_drvdata(pdev);
mbox_controller_unregister(&mbox->controller);
return 0;
}
static struct platform_driver hi3660_mbox_driver = {
.probe = hi3660_mbox_probe,
.remove = hi3660_mbox_remove,
.driver = {
.name = "hi3660-mbox",
.of_match_table = hi3660_mbox_of_match,
},
};
static int __init hi3660_mbox_init(void)
{
return platform_driver_register(&hi3660_mbox_driver);
}
core_initcall(hi3660_mbox_init);
static void __exit hi3660_mbox_exit(void)
{
platform_driver_unregister(&hi3660_mbox_driver);
}
module_exit(hi3660_mbox_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Hisilicon Hi3660 Mailbox Controller");
MODULE_AUTHOR("Leo Yan <leo.yan@linaro.org>");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment