Commit 28f31369 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'imx-dt-clkdep-4.7' of...

Merge tag 'imx-dt-clkdep-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/late

Merge "The i.MX device tree updates with new clocks for 4.7" from Shawn Guo:

 - Add LCDIF and FlexCAN device support for i.MX7D
 - New support i.MX7D based Nitrogen7 board from Boundary Devices
 - Add display support for vf610-colibri board

* tag 'imx-dt-clkdep-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: vf610-colibri: enable display controller
  ARM: dts: vf610: add display nodes
  ARM: dts: imx: add Boundary Devices Nitrogen7 board
  ARM: dts: imx7d: add flexcan support
  ARM: dts: imx7d: add lcdif support
  clk: imx: vf610: fix whitespace in vf610-clock.h
  clk: imx: vf610: add TCON ipg clock
  clk: imx: vf610: fix DCU clock tree
  clk: imx: add ckil clock for i.MX7
  clk: imx: vf610: add suspend/resume support
  clk: imx: vf610: add WKPU unit
  clk: imx: vf610: leave DDR clock on
  clk: imx: clk-gate2: allow custom gate configuration
  clk: imx6sx: Register SAI clocks as shared clocks
parents 0683e598 77f0862d
......@@ -377,6 +377,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
imx7d-nitrogen7.dtb \
imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
......
This diff is collapsed.
......@@ -651,6 +651,17 @@ pwm4: pwm@30690000 {
#pwm-cells = <2>;
status = "disabled";
};
lcdif: lcdif@30730000 {
compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
reg = <0x30730000 0x10000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
<&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>;
clock-names = "pix", "axi", "disp_axi";
status = "disabled";
};
};
aips3: aips-bus@30800000 {
......@@ -693,6 +704,26 @@ uart3: serial@30880000 {
status = "disabled";
};
flexcan1: can@30a00000 {
compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
reg = <0x30a00000 0x10000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CAN1_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
flexcan2: can@30a10000 {
compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
reg = <0x30a10000 0x10000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CAN2_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
i2c1: i2c@30a20000 {
#address-cells = <1>;
#size-cells = <0>;
......
......@@ -50,6 +50,11 @@ clk16m: clk16m {
clock-frequency = <16000000>;
};
panel: panel {
compatible = "edt,et057090dhu";
backlight = <&bl>;
};
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3.3V";
......@@ -83,6 +88,13 @@ &bl {
status = "okay";
};
&dcu0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dcu0_1>;
fsl,panel = <&panel>;
status = "okay";
};
&dspi1 {
status = "okay";
......@@ -134,6 +146,10 @@ &reg_module_3v3 {
vin-supply = <&reg_3v3>;
};
&tcon0 {
status = "okay";
};
&uart0 {
status = "okay";
};
......
......@@ -219,6 +219,39 @@ VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */
>;
};
pinctrl_dcu0_1: dcu0grp_1 {
fsl,pins = <
VF610_PAD_PTE0__DCU0_HSYNC 0x1902
VF610_PAD_PTE1__DCU0_VSYNC 0x1902
VF610_PAD_PTE2__DCU0_PCLK 0x1902
VF610_PAD_PTE4__DCU0_DE 0x1902
VF610_PAD_PTE5__DCU0_R0 0x1902
VF610_PAD_PTE6__DCU0_R1 0x1902
VF610_PAD_PTE7__DCU0_R2 0x1902
VF610_PAD_PTE8__DCU0_R3 0x1902
VF610_PAD_PTE9__DCU0_R4 0x1902
VF610_PAD_PTE10__DCU0_R5 0x1902
VF610_PAD_PTE11__DCU0_R6 0x1902
VF610_PAD_PTE12__DCU0_R7 0x1902
VF610_PAD_PTE13__DCU0_G0 0x1902
VF610_PAD_PTE14__DCU0_G1 0x1902
VF610_PAD_PTE15__DCU0_G2 0x1902
VF610_PAD_PTE16__DCU0_G3 0x1902
VF610_PAD_PTE17__DCU0_G4 0x1902
VF610_PAD_PTE18__DCU0_G5 0x1902
VF610_PAD_PTE19__DCU0_G6 0x1902
VF610_PAD_PTE20__DCU0_G7 0x1902
VF610_PAD_PTE21__DCU0_B0 0x1902
VF610_PAD_PTE22__DCU0_B1 0x1902
VF610_PAD_PTE23__DCU0_B2 0x1902
VF610_PAD_PTE24__DCU0_B3 0x1902
VF610_PAD_PTE25__DCU0_B4 0x1902
VF610_PAD_PTE26__DCU0_B5 0x1902
VF610_PAD_PTE27__DCU0_B6 0x1902
VF610_PAD_PTE28__DCU0_B7 0x1902
>;
};
pinctrl_dspi1: dspi1grp {
fsl,pins = <
VF610_PAD_PTD5__DSPI1_CS0 0x33e2
......
......@@ -310,6 +310,14 @@ adc0: adc@4003b000 {
<20000000>;
};
tcon0: timing-controller@4003d000 {
compatible = "fsl,vf610-tcon";
reg = <0x4003d000 0x1000>;
clocks = <&clks VF610_CLK_TCON0>;
clock-names = "ipg";
status = "disabled";
};
wdoga5: wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
......@@ -415,6 +423,17 @@ usbphy1: usbphy@40050c00 {
status = "disabled";
};
dcu0: dcu@40058000 {
compatible = "fsl,vf610-dcu";
reg = <0x40058000 0x1200>;
interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DCU0>,
<&clks VF610_CLK_DCU0_DIV>;
clock-names = "dcu", "pix";
fsl,tcon = <&tcon0>;
status = "disabled";
};
i2c0: i2c@40066000 {
#address-cells = <1>;
#size-cells = <0>;
......
......@@ -31,6 +31,7 @@ struct clk_gate2 {
struct clk_hw hw;
void __iomem *reg;
u8 bit_idx;
u8 cgr_val;
u8 flags;
spinlock_t *lock;
unsigned int *share_count;
......@@ -50,7 +51,8 @@ static int clk_gate2_enable(struct clk_hw *hw)
goto out;
reg = readl(gate->reg);
reg |= 3 << gate->bit_idx;
reg &= ~(3 << gate->bit_idx);
reg |= gate->cgr_val << gate->bit_idx;
writel(reg, gate->reg);
out:
......@@ -125,7 +127,7 @@ static struct clk_ops clk_gate2_ops = {
struct clk *clk_register_gate2(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
void __iomem *reg, u8 bit_idx, u8 cgr_val,
u8 clk_gate2_flags, spinlock_t *lock,
unsigned int *share_count)
{
......@@ -140,6 +142,7 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
/* struct clk_gate2 assignments */
gate->reg = reg;
gate->bit_idx = bit_idx;
gate->cgr_val = cgr_val;
gate->flags = clk_gate2_flags;
gate->lock = lock;
gate->share_count = share_count;
......
......@@ -134,6 +134,8 @@ static u32 share_count_esai;
static u32 share_count_ssi1;
static u32 share_count_ssi2;
static u32 share_count_ssi3;
static u32 share_count_sai1;
static u32 share_count_sai2;
static struct clk ** const uart_clks[] __initconst = {
&clks[IMX6SX_CLK_UART_IPG],
......@@ -469,10 +471,10 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clks[IMX6SX_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26);
clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28);
clks[IMX6SX_CLK_SAI2_IPG] = imx_clk_gate2("sai2_ipg", "ipg", base + 0x7c, 30);
clks[IMX6SX_CLK_SAI1] = imx_clk_gate2("sai1", "ssi1_podf", base + 0x7c, 28);
clks[IMX6SX_CLK_SAI2] = imx_clk_gate2("sai2", "ssi2_podf", base + 0x7c, 30);
clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2_shared("sai1_ipg", "ipg", base + 0x7c, 28, &share_count_sai1);
clks[IMX6SX_CLK_SAI2_IPG] = imx_clk_gate2_shared("sai2_ipg", "ipg", base + 0x7c, 30, &share_count_sai2);
clks[IMX6SX_CLK_SAI1] = imx_clk_gate2_shared("sai1", "ssi1_podf", base + 0x7c, 28, &share_count_sai1);
clks[IMX6SX_CLK_SAI2] = imx_clk_gate2_shared("sai2", "ssi2_podf", base + 0x7c, 30, &share_count_sai2);
/* CCGR6 */
clks[IMX6SX_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
......
......@@ -342,7 +342,7 @@ static const char *clko1_sel[] = { "osc", "pll_sys_main_clk",
static const char *clko2_sel[] = { "osc", "pll_sys_main_240m_clk",
"pll_sys_pfd0_392m_clk", "pll_sys_pfd1_166m_clk", "pll_sys_pfd4_clk",
"pll_audio_main_clk", "pll_video_main_clk", "osc_32k_clk", };
"pll_audio_main_clk", "pll_video_main_clk", "ckil", };
static const char *lvds1_sel[] = { "pll_arm_main_clk",
"pll_sys_main_clk", "pll_sys_pfd0_392m_clk", "pll_sys_pfd1_332m_clk",
......@@ -382,6 +382,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
clks[IMX7D_OSC_24M_CLK] = of_clk_get_by_name(ccm_node, "osc");
clks[IMX7D_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-anatop");
base = of_iomap(np, 0);
......
......@@ -10,6 +10,7 @@
#include <linux/of_address.h>
#include <linux/clk.h>
#include <linux/syscore_ops.h>
#include <dt-bindings/clock/vf610-clock.h>
#include "clk.h"
......@@ -40,6 +41,7 @@
#define CCM_CCGR9 (ccm_base + 0x64)
#define CCM_CCGR10 (ccm_base + 0x68)
#define CCM_CCGR11 (ccm_base + 0x6c)
#define CCM_CCGRx(x) (CCM_CCGR0 + (x) * 4)
#define CCM_CMEOR0 (ccm_base + 0x70)
#define CCM_CMEOR1 (ccm_base + 0x74)
#define CCM_CMEOR2 (ccm_base + 0x78)
......@@ -115,10 +117,19 @@ static struct clk_div_table pll4_audio_div_table[] = {
static struct clk *clk[VF610_CLK_END];
static struct clk_onecell_data clk_data;
static u32 cscmr1;
static u32 cscmr2;
static u32 cscdr1;
static u32 cscdr2;
static u32 cscdr3;
static u32 ccgr[12];
static unsigned int const clks_init_on[] __initconst = {
VF610_CLK_SYS_BUS,
VF610_CLK_DDR_SEL,
VF610_CLK_DAP,
VF610_CLK_DDRMC,
VF610_CLK_WKPU,
};
static struct clk * __init vf610_get_fixed_clock(
......@@ -132,6 +143,43 @@ static struct clk * __init vf610_get_fixed_clock(
return clk;
};
static int vf610_clk_suspend(void)
{
int i;
cscmr1 = readl_relaxed(CCM_CSCMR1);
cscmr2 = readl_relaxed(CCM_CSCMR2);
cscdr1 = readl_relaxed(CCM_CSCDR1);
cscdr2 = readl_relaxed(CCM_CSCDR2);
cscdr3 = readl_relaxed(CCM_CSCDR3);
for (i = 0; i < 12; i++)
ccgr[i] = readl_relaxed(CCM_CCGRx(i));
return 0;
}
static void vf610_clk_resume(void)
{
int i;
writel_relaxed(cscmr1, CCM_CSCMR1);
writel_relaxed(cscmr2, CCM_CSCMR2);
writel_relaxed(cscdr1, CCM_CSCDR1);
writel_relaxed(cscdr2, CCM_CSCDR2);
writel_relaxed(cscdr3, CCM_CSCDR3);
for (i = 0; i < 12; i++)
writel_relaxed(ccgr[i], CCM_CCGRx(i));
}
static struct syscore_ops vf610_clk_syscore_ops = {
.suspend = vf610_clk_suspend,
.resume = vf610_clk_resume,
};
static void __init vf610_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
......@@ -233,6 +281,9 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock);
clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1);
clk[VF610_CLK_DDRMC] = imx_clk_gate2_cgr("ddrmc", "ddr_sel", CCM_CCGR6, CCM_CCGRx_CGn(14), 0x2);
clk[VF610_CLK_WKPU] = imx_clk_gate2_cgr("wkpu", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(10), 0x2);
clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6);
clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6);
......@@ -321,11 +372,14 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_DCU0_SEL] = imx_clk_mux("dcu0_sel", CCM_CSCMR1, 28, 1, dcu_sels, 2);
clk[VF610_CLK_DCU0_EN] = imx_clk_gate("dcu0_en", "dcu0_sel", CCM_CSCDR3, 19);
clk[VF610_CLK_DCU0_DIV] = imx_clk_divider("dcu0_div", "dcu0_en", CCM_CSCDR3, 16, 3);
clk[VF610_CLK_DCU0] = imx_clk_gate2("dcu0", "dcu0_div", CCM_CCGR3, CCM_CCGRx_CGn(8));
clk[VF610_CLK_DCU0] = imx_clk_gate2("dcu0", "ipg_bus", CCM_CCGR3, CCM_CCGRx_CGn(8));
clk[VF610_CLK_DCU1_SEL] = imx_clk_mux("dcu1_sel", CCM_CSCMR1, 29, 1, dcu_sels, 2);
clk[VF610_CLK_DCU1_EN] = imx_clk_gate("dcu1_en", "dcu1_sel", CCM_CSCDR3, 23);
clk[VF610_CLK_DCU1_DIV] = imx_clk_divider("dcu1_div", "dcu1_en", CCM_CSCDR3, 20, 3);
clk[VF610_CLK_DCU1] = imx_clk_gate2("dcu1", "dcu1_div", CCM_CCGR9, CCM_CCGRx_CGn(8));
clk[VF610_CLK_DCU1] = imx_clk_gate2("dcu1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(8));
clk[VF610_CLK_TCON0] = imx_clk_gate2("tcon0", "platform_bus", CCM_CCGR1, CCM_CCGRx_CGn(13));
clk[VF610_CLK_TCON1] = imx_clk_gate2("tcon1", "platform_bus", CCM_CCGR7, CCM_CCGRx_CGn(13));
clk[VF610_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", CCM_CSCMR1, 20, 2, esai_sels, 4);
clk[VF610_CLK_ESAI_EN] = imx_clk_gate("esai_en", "esai_sel", CCM_CSCDR2, 30);
......@@ -409,6 +463,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
register_syscore_ops(&vf610_clk_syscore_ops);
/* Add the clocks to provider list */
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
......
......@@ -41,7 +41,7 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
struct clk *clk_register_gate2(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
void __iomem *reg, u8 bit_idx, u8 cgr_val,
u8 clk_gate_flags, spinlock_t *lock,
unsigned int *share_count);
......@@ -55,7 +55,7 @@ static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
void __iomem *reg, u8 shift)
{
return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
shift, 0, &imx_ccm_lock, NULL);
shift, 0x3, 0, &imx_ccm_lock, NULL);
}
static inline struct clk *imx_clk_gate2_shared(const char *name,
......@@ -63,7 +63,14 @@ static inline struct clk *imx_clk_gate2_shared(const char *name,
unsigned int *share_count)
{
return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
shift, 0, &imx_ccm_lock, share_count);
shift, 0x3, 0, &imx_ccm_lock, share_count);
}
static inline struct clk *imx_clk_gate2_cgr(const char *name, const char *parent,
void __iomem *reg, u8 shift, u8 cgr_val)
{
return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
shift, cgr_val, 0, &imx_ccm_lock, NULL);
}
struct clk *imx_clk_pfd(const char *name, const char *parent_name,
......
......@@ -448,5 +448,6 @@
#define IMX7D_PLL_DRAM_TEST_DIV 435
#define IMX7D_ADC_ROOT_CLK 436
#define IMX7D_CLK_ARM 437
#define IMX7D_CLK_END 438
#define IMX7D_CKIL 438
#define IMX7D_CLK_END 439
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
......@@ -194,7 +194,11 @@
#define VF610_PLL7_BYPASS 181
#define VF610_CLK_SNVS 182
#define VF610_CLK_DAP 183
#define VF610_CLK_OCOTP 184
#define VF610_CLK_END 185
#define VF610_CLK_OCOTP 184
#define VF610_CLK_DDRMC 185
#define VF610_CLK_WKPU 186
#define VF610_CLK_TCON0 187
#define VF610_CLK_TCON1 188
#define VF610_CLK_END 189
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment