Commit 29217a47 authored by Lan Tianyu's avatar Lan Tianyu Committed by Joerg Roedel

iommu/hyper-v: Add Hyper-V stub IOMMU driver

On the bare metal, enabling X2APIC mode requires interrupt remapping
function which helps to deliver irq to cpu with 32-bit APIC ID.
Hyper-V doesn't provide interrupt remapping function so far and Hyper-V
MSI protocol already supports to deliver interrupt to the CPU whose
virtual processor index is more than 255. IO-APIC interrupt still has
8-bit APIC ID limitation.

This patch is to add Hyper-V stub IOMMU driver in order to enable
X2APIC mode successfully in Hyper-V Linux guest. The driver returns X2APIC
interrupt remapping capability when X2APIC mode is available. Otherwise,
it creates a Hyper-V irq domain to limit IO-APIC interrupts' affinity
and make sure cpus assigned with IO-APIC interrupt have 8-bit APIC ID.

Define 24 IO-APIC remapping entries because Hyper-V only expose one
single IO-APIC and one IO-APIC has 24 pins according IO-APIC spec(
https://pdos.csail.mit.edu/6.828/2016/readings/ia32/ioapic.pdf).
Reviewed-by: default avatarMichael Kelley <mikelley@microsoft.com>
Signed-off-by: default avatarLan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: default avatarJoerg Roedel <jroedel@suse.de>
parent 84fdfafa
...@@ -435,4 +435,13 @@ config QCOM_IOMMU ...@@ -435,4 +435,13 @@ config QCOM_IOMMU
help help
Support for IOMMU on certain Qualcomm SoCs. Support for IOMMU on certain Qualcomm SoCs.
config HYPERV_IOMMU
bool "Hyper-V x2APIC IRQ Handling"
depends on HYPERV
select IOMMU_API
default HYPERV
help
Stub IOMMU driver to handle IRQs as to allow Hyper-V Linux
guests to run with x2APIC mode enabled.
endif # IOMMU_SUPPORT endif # IOMMU_SUPPORT
...@@ -32,3 +32,4 @@ obj-$(CONFIG_EXYNOS_IOMMU) += exynos-iommu.o ...@@ -32,3 +32,4 @@ obj-$(CONFIG_EXYNOS_IOMMU) += exynos-iommu.o
obj-$(CONFIG_FSL_PAMU) += fsl_pamu.o fsl_pamu_domain.o obj-$(CONFIG_FSL_PAMU) += fsl_pamu.o fsl_pamu_domain.o
obj-$(CONFIG_S390_IOMMU) += s390-iommu.o obj-$(CONFIG_S390_IOMMU) += s390-iommu.o
obj-$(CONFIG_QCOM_IOMMU) += qcom_iommu.o obj-$(CONFIG_QCOM_IOMMU) += qcom_iommu.o
obj-$(CONFIG_HYPERV_IOMMU) += hyperv-iommu.o
// SPDX-License-Identifier: GPL-2.0
/*
* Hyper-V stub IOMMU driver.
*
* Copyright (C) 2019, Microsoft, Inc.
*
* Author : Lan Tianyu <Tianyu.Lan@microsoft.com>
*/
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/iommu.h>
#include <linux/module.h>
#include <asm/apic.h>
#include <asm/cpu.h>
#include <asm/hw_irq.h>
#include <asm/io_apic.h>
#include <asm/irq_remapping.h>
#include <asm/hypervisor.h>
#include "irq_remapping.h"
#ifdef CONFIG_IRQ_REMAP
/*
* According 82093AA IO-APIC spec , IO APIC has a 24-entry Interrupt
* Redirection Table. Hyper-V exposes one single IO-APIC and so define
* 24 IO APIC remmapping entries.
*/
#define IOAPIC_REMAPPING_ENTRY 24
static cpumask_t ioapic_max_cpumask = { CPU_BITS_NONE };
static struct irq_domain *ioapic_ir_domain;
static int hyperv_ir_set_affinity(struct irq_data *data,
const struct cpumask *mask, bool force)
{
struct irq_data *parent = data->parent_data;
struct irq_cfg *cfg = irqd_cfg(data);
struct IO_APIC_route_entry *entry;
int ret;
/* Return error If new irq affinity is out of ioapic_max_cpumask. */
if (!cpumask_subset(mask, &ioapic_max_cpumask))
return -EINVAL;
ret = parent->chip->irq_set_affinity(parent, mask, force);
if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
return ret;
entry = data->chip_data;
entry->dest = cfg->dest_apicid;
entry->vector = cfg->vector;
send_cleanup_vector(cfg);
return 0;
}
static struct irq_chip hyperv_ir_chip = {
.name = "HYPERV-IR",
.irq_ack = apic_ack_irq,
.irq_set_affinity = hyperv_ir_set_affinity,
};
static int hyperv_irq_remapping_alloc(struct irq_domain *domain,
unsigned int virq, unsigned int nr_irqs,
void *arg)
{
struct irq_alloc_info *info = arg;
struct irq_data *irq_data;
struct irq_desc *desc;
int ret = 0;
if (!info || info->type != X86_IRQ_ALLOC_TYPE_IOAPIC || nr_irqs > 1)
return -EINVAL;
ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
if (ret < 0)
return ret;
irq_data = irq_domain_get_irq_data(domain, virq);
if (!irq_data) {
irq_domain_free_irqs_common(domain, virq, nr_irqs);
return -EINVAL;
}
irq_data->chip = &hyperv_ir_chip;
/*
* If there is interrupt remapping function of IOMMU, setting irq
* affinity only needs to change IRTE of IOMMU. But Hyper-V doesn't
* support interrupt remapping function, setting irq affinity of IO-APIC
* interrupts still needs to change IO-APIC registers. But ioapic_
* configure_entry() will ignore value of cfg->vector and cfg->
* dest_apicid when IO-APIC's parent irq domain is not the vector
* domain.(See ioapic_configure_entry()) In order to setting vector
* and dest_apicid to IO-APIC register, IO-APIC entry pointer is saved
* in the chip_data and hyperv_irq_remapping_activate()/hyperv_ir_set_
* affinity() set vector and dest_apicid directly into IO-APIC entry.
*/
irq_data->chip_data = info->ioapic_entry;
/*
* Hypver-V IO APIC irq affinity should be in the scope of
* ioapic_max_cpumask because no irq remapping support.
*/
desc = irq_data_to_desc(irq_data);
cpumask_copy(desc->irq_common_data.affinity, &ioapic_max_cpumask);
return 0;
}
static void hyperv_irq_remapping_free(struct irq_domain *domain,
unsigned int virq, unsigned int nr_irqs)
{
irq_domain_free_irqs_common(domain, virq, nr_irqs);
}
static int hyperv_irq_remapping_activate(struct irq_domain *domain,
struct irq_data *irq_data, bool reserve)
{
struct irq_cfg *cfg = irqd_cfg(irq_data);
struct IO_APIC_route_entry *entry = irq_data->chip_data;
entry->dest = cfg->dest_apicid;
entry->vector = cfg->vector;
return 0;
}
static struct irq_domain_ops hyperv_ir_domain_ops = {
.alloc = hyperv_irq_remapping_alloc,
.free = hyperv_irq_remapping_free,
.activate = hyperv_irq_remapping_activate,
};
static int __init hyperv_prepare_irq_remapping(void)
{
struct fwnode_handle *fn;
int i;
if (!hypervisor_is_type(X86_HYPER_MS_HYPERV) ||
!x2apic_supported())
return -ENODEV;
fn = irq_domain_alloc_named_id_fwnode("HYPERV-IR", 0);
if (!fn)
return -ENOMEM;
ioapic_ir_domain =
irq_domain_create_hierarchy(arch_get_ir_parent_domain(),
0, IOAPIC_REMAPPING_ENTRY, fn,
&hyperv_ir_domain_ops, NULL);
irq_domain_free_fwnode(fn);
/*
* Hyper-V doesn't provide irq remapping function for
* IO-APIC and so IO-APIC only accepts 8-bit APIC ID.
* Cpu's APIC ID is read from ACPI MADT table and APIC IDs
* in the MADT table on Hyper-v are sorted monotonic increasingly.
* APIC ID reflects cpu topology. There maybe some APIC ID
* gaps when cpu number in a socket is not power of two. Prepare
* max cpu affinity for IOAPIC irqs. Scan cpu 0-255 and set cpu
* into ioapic_max_cpumask if its APIC ID is less than 256.
*/
for (i = min_t(unsigned int, num_possible_cpus() - 1, 255); i >= 0; i--)
if (cpu_physical_id(i) < 256)
cpumask_set_cpu(i, &ioapic_max_cpumask);
return 0;
}
static int __init hyperv_enable_irq_remapping(void)
{
return IRQ_REMAP_X2APIC_MODE;
}
static struct irq_domain *hyperv_get_ir_irq_domain(struct irq_alloc_info *info)
{
if (info->type == X86_IRQ_ALLOC_TYPE_IOAPIC)
return ioapic_ir_domain;
else
return NULL;
}
struct irq_remap_ops hyperv_irq_remap_ops = {
.prepare = hyperv_prepare_irq_remapping,
.enable = hyperv_enable_irq_remapping,
.get_ir_irq_domain = hyperv_get_ir_irq_domain,
};
#endif
...@@ -103,6 +103,9 @@ int __init irq_remapping_prepare(void) ...@@ -103,6 +103,9 @@ int __init irq_remapping_prepare(void)
else if (IS_ENABLED(CONFIG_AMD_IOMMU) && else if (IS_ENABLED(CONFIG_AMD_IOMMU) &&
amd_iommu_irq_ops.prepare() == 0) amd_iommu_irq_ops.prepare() == 0)
remap_ops = &amd_iommu_irq_ops; remap_ops = &amd_iommu_irq_ops;
else if (IS_ENABLED(CONFIG_HYPERV_IOMMU) &&
hyperv_irq_remap_ops.prepare() == 0)
remap_ops = &hyperv_irq_remap_ops;
else else
return -ENOSYS; return -ENOSYS;
......
...@@ -64,6 +64,7 @@ struct irq_remap_ops { ...@@ -64,6 +64,7 @@ struct irq_remap_ops {
extern struct irq_remap_ops intel_irq_remap_ops; extern struct irq_remap_ops intel_irq_remap_ops;
extern struct irq_remap_ops amd_iommu_irq_ops; extern struct irq_remap_ops amd_iommu_irq_ops;
extern struct irq_remap_ops hyperv_irq_remap_ops;
#else /* CONFIG_IRQ_REMAP */ #else /* CONFIG_IRQ_REMAP */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment