Merge tag 'sunxi-dt-for-5.12' of...

Merge tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
  - DT fixes spotted through the schemas
  - Mali Support for the A10s/A13/GR8/R8
  - MMC improvements for the A64 and H6
  - New board: SL631 Action Camera, PineTab Early Adopter

* tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (47 commits)
  ARM: dts: sunxi: Rename nmi_intc to r_intc
  ARM: dts: sun8i: h2-plus: bananapi-m2-zero: Increase BT UART speed
  ARM: dts: sunxi: bananapi-m2-plus: Increase BT UART speed
  arm64: dts: allwinner: pine-h64: Fix typos in BT GPIOs
  arm64: dts: allwinner: pinetab: Fix the panel compatible
  arm64: dts: allwinner: pinephone: Remove useless light sensor supplies
  arm64: dts: allwinner: h6: Use - instead of @ for DT OPP entries
  ARM: dts: sun8i-a33: sina33: Add missing panel power supply
  ARM: dts: sun8i-a83t: Remove empty CSI port
  ARM: dts: sun8i-s3: pinecube: Fix CSI DTC warnings
  ARM: dts: sun8i-s3: impetus: Fix the USB PHY ID detect GPIO properties
  ARM: dts: sun8i: nanopi-r1: Fix GPIO regulator state array
  ARM: dts: sun6i: primo81: Remove useless io-channel-cells
  ARM: dts: sunxi: Fix CPU thermal zone node name
  ARM: dts: sunxi: Add missing backlight supply
  ARM: dts: sunxi: Fix the LED node names
  dt-bindings: rtc: sun6i-a31-rtc: Loosen the requirements on the clocks
  dt-bindings: iio: adc: Add AXP803 compatible
  dt-bindings: sunxi: Fix the pinecube compatible
  ARM: dts: sun8i-v3s: Add CSI0 MCLK pin definition
  ...

Link: https://lore.kernel.org/r/48511540-fdd6-4fbe-8037-ec9fa8436147.lettre@localhostSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/sunxi.yaml

@@ -657,7 +657,8 @@ properties:
       - description: Pine64 PineCube
         items:
           - const: pine64,pinecube
-          - const: allwinner,sun8i-s3
+          - const: sochip,s3
+          - const: allwinner,sun8i-v3
 
       - description: Pine64 PineH64 model A
         items:
@@ -683,23 +684,31 @@ properties:
       - description: Pine64 PinePhone Developer Batch (1.0)
         items:
           - const: pine64,pinephone-1.0
+          - const: pine64,pinephone
           - const: allwinner,sun50i-a64
 
       - description: Pine64 PinePhone Braveheart (1.1)
         items:
           - const: pine64,pinephone-1.1
+          - const: pine64,pinephone
           - const: allwinner,sun50i-a64
 
       - description: Pine64 PinePhone (1.2)
         items:
           - const: pine64,pinephone-1.2
+          - const: pine64,pinephone
           - const: allwinner,sun50i-a64
 
-      - description: Pine64 PineTab
+      - description: Pine64 PineTab, Development Sample
         items:
           - const: pine64,pinetab
           - const: allwinner,sun50i-a64
 
+      - description: Pine64 PineTab, Early Adopter's batch (and maybe later ones)
+        items:
+          - const: pine64,pinetab-early-adopter
+          - const: allwinner,sun50i-a64
+
       - description: Pine64 SoPine Baseboard
         items:
           - const: pine64,sopine-baseboard
@@ -777,6 +786,12 @@ properties:
           - const: sinlinx,sina33
           - const: allwinner,sun8i-a33
 
+      - description: SL631 Action Camera with IMX179
+        items:
+          - const: allwinner,sl631-imx179
+          - const: allwinner,sl631
+          - const: allwinner,sun8i-v3
+
       - description: Tanix TX6
         items:
           - const: oranth,tanix-tx6

Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml

@@ -46,10 +46,14 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - x-powers,axp209-adc
-      - x-powers,axp221-adc
-      - x-powers,axp813-adc
+    oneOf:
+      - const: x-powers,axp209-adc
+      - const: x-powers,axp221-adc
+      - const: x-powers,axp813-adc
+
+      - items:
+          - const: x-powers,axp803-adc
+          - const: x-powers,axp813-adc
 
   "#io-channel-cells":
     const: 1

Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml

@@ -29,6 +29,9 @@ properties:
       - items:
           - const: allwinner,sun8i-a83t-r-intc
           - const: allwinner,sun6i-a31-r-intc
+      - items:
+          - const: allwinner,sun8i-v3s-nmi
+          - const: allwinner,sun9i-a80-nmi
       - const: allwinner,sun9i-a80-nmi
       - items:
           - const: allwinner,sun50i-a64-r-intc

Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml

@@ -19,6 +19,9 @@ properties:
   compatible:
     oneOf:
       - const: allwinner,sun8i-h3-deinterlace
+      - items:
+          - const: allwinner,sun8i-r40-deinterlace
+          - const: allwinner,sun8i-h3-deinterlace
       - items:
           - const: allwinner,sun50i-a64-deinterlace
           - const: allwinner,sun8i-h3-deinterlace

Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml

@@ -128,7 +128,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - clocks
   - clock-output-names
 
 additionalProperties: false

arch/arm/boot/dts/Makefile

@@ -1225,6 +1225,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-s3-lichee-zero-plus.dtb \
 	sun8i-s3-pinecube.dtb \
 	sun8i-t3-cqa3t-bv3.dtb \
+	sun8i-v3-sl631-imx179.dtb \
 	sun8i-v3s-licheepi-zero.dtb \
 	sun8i-v3s-licheepi-zero-dock.dtb \
 	sun8i-v40-bananapi-m2-berry.dtb

arch/arm/boot/dts/sun4i-a10-a1000.dts

@@ -74,12 +74,12 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-0 {
 			label = "a1000:red:usr";
 			gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-1 {
 			label = "a1000:blue:pwr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun4i-a10-cubieboard.dts

@@ -75,12 +75,12 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_cubieboard>;
 
-		blue {
+		led-0 {
 			label = "cubieboard:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
 		};
 
-		green {
+		led-1 {
 			label = "cubieboard:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
 			linux,default-trigger = "heartbeat";

arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts

@@ -62,6 +62,7 @@ backlight: backlight {
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {

arch/arm/boot/dts/sun4i-a10-inet1.dts

@@ -62,6 +62,7 @@ backlight: backlight {
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {

arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts

@@ -63,7 +63,7 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "q5:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
 		};

arch/arm/boot/dts/sun4i-a10-marsboard.dts

@@ -62,22 +62,22 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		red1 {
+		led-0 {
 			label = "marsboard:red1:usr";
 			gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		red2 {
+		led-1 {
 			label = "marsboard:red2:usr";
 			gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		red3 {
+		led-2 {
 			label = "marsboard:red3:usr";
 			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		red4 {
+		led-3 {
 			label = "marsboard:red4:usr";
 			gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts

@@ -74,7 +74,7 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		green {
+		led {
 			label = "a10-olinuxino-lime:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun4i-a10-pcduino.dts

@@ -63,12 +63,12 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		tx {
+		led-0 {
 			label = "pcduino:green:tx";
 			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
 		};
 
-		rx {
+		led-1 {
 			label = "pcduino:green:rx";
 			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
 		};

arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts

@@ -62,6 +62,7 @@ backlight: backlight {
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {

arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts

@@ -62,7 +62,7 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_t003>;
 
-		red {
+		led {
 			label = "t003-tv-dongle:red:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 			default-state = "on";

arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts

@@ -62,7 +62,7 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_t004>;
 
-		red {
+		led {
 			label = "t004-tv-dongle:red:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 			default-state = "on";

arch/arm/boot/dts/sun5i-a10s-mk802.dts

@@ -60,7 +60,7 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led {
 			label = "mk802:red:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 		};

arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts

@@ -79,7 +79,7 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxino>;
 
-		green {
+		led {
 			label = "a10s-olinuxino-micro:green:usr";
 			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts

@@ -63,7 +63,7 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_r7>;
 
-		green {
+		led {
 			label = "r7-tv-dongle:green:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts

@@ -62,7 +62,7 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led {
 			label = "a10s-wobo-i5:blue:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts

@@ -61,6 +61,7 @@ backlight: backlight {
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
+		power-supply = <&reg_vcc3v3>;
 		/* TODO: backlight uses axp gpio1 as enable pin */
 	};
 

arch/arm/boot/dts/sun5i-a13-licheepi-one.dts

@@ -66,18 +66,18 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-0 {
 			label ="licheepi:red:usr";
 			gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
 		};
 
-		green {
+		led-1 {
 			label ="licheepi:green:usr";
 			gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		blue {
+		led-2 {
 			label ="licheepi:blue:usr";
 			gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
 		};

arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts

@@ -64,7 +64,7 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinom>;
 
-		power {
+		led {
 			label = "a13-olinuxino-micro:green:power";
 			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun5i-a13-olinuxino.dts

@@ -66,7 +66,7 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxino>;
 
-		power {
+		led {
 			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};

arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts

@@ -28,6 +28,7 @@ backlight {
 		enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {
@@ -37,7 +38,7 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led {
 			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
 			default-state = "on";
 		};

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -48,7 +48,7 @@
 
 / {
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;

arch/arm/boot/dts/sun5i-gr8-evb.dts

@@ -71,7 +71,7 @@ backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 10000 0>;
 		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
-
+		power-supply = <&reg_vcc3v3>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 	};

arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi

@@ -55,6 +55,7 @@ backlight: backlight {
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */
+		power-supply = <&reg_vcc3v0>;
 	};
 
 	chosen {

arch/arm/boot/dts/sun5i.dtsi

@@ -726,6 +726,18 @@ i2c2: i2c@1c2b400 {
 			#size-cells = <0>;
 		};
 
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <69>, <70>, <71>, <72>,  <73>;
+			interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <320000000>;
+		};
+
 		timer@1c60000 {
 			compatible = "allwinner,sun5i-a13-hstimer";
 			reg = <0x01c60000 0x1000>;

arch/arm/boot/dts/sun6i-a31-hummingbird.dts

@@ -226,7 +226,7 @@ &p2wi {
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		x-powers,drive-vbus-en;
 	};

arch/arm/boot/dts/sun6i-a31-i7.dts

@@ -72,7 +72,7 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led {
 			label = "i7:blue:usr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/sun6i-a31-m9.dts

@@ -61,7 +61,7 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led {
 			label = "m9:blue:pwr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -115,7 +115,7 @@ &p2wi {
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 	};
 };

arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts

@@ -61,7 +61,7 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led {
 			label = "a1000g:blue:pwr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -115,7 +115,7 @@ &p2wi {
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 	};
 };

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -165,7 +165,7 @@ cpu3: cpu@3 {
 	};
 
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
@@ -1305,7 +1305,7 @@ rtc: rtc@1f00000 {
 			clock-output-names = "osc32k";
 		};
 
-		nmi_intc: interrupt-controller@1f00c00 {
+		r_intc: interrupt-controller@1f00c00 {
 			compatible = "allwinner,sun6i-a31-r-intc";
 			interrupt-controller;
 			#interrupt-cells = <2>;

arch/arm/boot/dts/sun6i-a31s-primo81.dts

@@ -115,7 +115,6 @@ accelerometer@1c {
 		reg = <0x1c>;
 		interrupt-parent = <&pio>;
 		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
-		#io-channel-cells = <1>;
 	};
 };
 
@@ -159,7 +158,7 @@ &p2wi {
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		x-powers,drive-vbus-en;
 	};

arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi

@@ -78,7 +78,7 @@ &p2wi {
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 	};
 };

arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts

@@ -59,17 +59,17 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "bpi-m2:blue:usr";
 			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
 		};
 
-		green {
+		led-1 {
 			label = "bpi-m2:green:usr";
 			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
 		};
 
-		red {
+		led-2 {
 			label = "bpi-m2:red:usr";
 			gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
 		};
@@ -148,7 +148,7 @@ &p2wi {
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
@@ -261,3 +261,74 @@ &uart0 {
 &usbphy {
 	status = "okay";
 };
+
+&pio {
+	gpio-line-names =
+		/* PA */
+		"ETXD0", "ETXD1", "ETXD2", "ETXD3", "SDC0-DET", "", "",
+		"", "ETXCLK", "ETXEN", "EGTXCLK", "ERXD0", "ERXD1",
+		"ERXD2", "ERXD3", "", "", "", "", "ERXDV", "ERXCK",
+		"ETXERR", "ERXERR", "ECOL", "ECRS", "ECLKIN", "EMDC",
+		"EMDIO", "", "", "", "",
+
+		/* PB */
+		"CN7-P29", "CN7-P31", "CN7-P33", "CN7-P35", "CN7-P37",
+		"CN7-P28", "CN7-P27", "CN7-P32", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "",
+
+		/* PC */
+		"", "", "", "", "", "", "WL-SDIO-CMD", "WL-SDIO-CLK",
+		"WL-SDIO-D0", "WL-SDIO-D2", "WL-SDIO-D2", "WL-SDIO-D3",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "USB-DRV", "", "", "", "",
+
+		/* PD */
+		"CN9-P09", "CN9-P11", "CN9-P13", "CN9-P15", "CN9-P17",
+		"CN9-P19", "CN9-P21", "CN9-P23", "CN9-P25", "CN9-P27",
+		"CN9-P29", "CN9-P31", "CN9-P33", "CN9-P35", "CN9-P37",
+		"CN9-P39", "CN9-P40", "CN9-P38", "CN9-P36", "CN9-P34",
+		"CN9-P32", "CN9-P30", "CN9-P28", "CN9-P26", "CN9-P22",
+		"CN9-P14", "CN9-P18", "CN9-P16", "", "", "", "",
+
+		/* PE */
+		"CN6-P20", "CN6-P24", "CN6-P30", "CN6-P28", "CN7-P08",
+		"CN7-P10", "CN7-P36", "CN7-P38", "CN6-P17", "CN6-P19",
+		"CN6-P21", "CN6-P23", "CN6-P25", "CN6-P27", "CN6-P29",
+		"CN6-P31", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "",
+
+		/* PF */
+		"SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+		"SDC0-D2", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"",
+
+		/* PG */
+		"CN9-P06", "CN9-P08", "CN9-P20", "CN9-P12", "CN9-P07",
+		"LED-PWR", "CN7-P13", "CN7-P11", "CN7-P22", "CN7-P15",
+		"LED-G", "LED-B", "CN7-P26", "CN7-P24", "CN7-P23",
+		"CN7-P19", "CN7-P21", "HCEC", "CN6-P22", "", "", "", "",
+		"", "", "", "", "", "", "", "", "",
+
+		/* PH */
+		"", "", "", "", "", "", "", "", "", "CN7-P07",
+		"CN7-P12", "CN7-P16", "CN7-P18", "CN9-P10", "CN6-P16",
+		"CN6-P14", "CN9-P04", "CN9-P02", "CN7-P05", "CN7-P03",
+		"CN8-P03", "CN8-P02", "", "", "CN6-P34", "CN6-P32",
+		"CN6-P26", "CN6-P18", "", "", "", "";
+};
+
+&r_pio {
+	gpio-line-names =
+		/* PL */
+		"PMU-SCK", "PMU-SDA", "VBAT-EN", "", "IR-RX",
+		"WL-WAKE-HOST", "BT-WAKE_HOST", "BT-ENABLE",
+		"WL-PMU-EN", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "",
+
+		/* PM */
+		"CN6-P12", "CN6-P35", "CN7-P40", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "";
+};

arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts

@@ -98,7 +98,7 @@ &p2wi {
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 	};
 };

arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi

@@ -79,7 +79,7 @@ &p2wi {
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;

arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts

@@ -74,12 +74,12 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-0 {
 			label = "bananapi-m1-plus:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-1 {
 			label = "bananapi-m1-plus:pwr:usr";
 			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun7i-a20-bananapi.dts

@@ -77,7 +77,7 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "bananapi:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/sun7i-a20-bananapro.dts

@@ -63,12 +63,12 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "bananapro:blue:usr";
 			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-1 {
 			label = "bananapro:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/sun7i-a20-cubieboard2.dts

@@ -75,12 +75,12 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "cubieboard2:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-1 {
 			label = "cubieboard2:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/sun7i-a20-cubietruck.dts

@@ -75,22 +75,22 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "cubietruck:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		orange {
+		led-1 {
 			label = "cubietruck:orange:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		white {
+		led-2 {
 			label = "cubietruck:white:usr";
 			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-3 {
 			label = "cubietruck:green:usr";
 			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts

@@ -62,12 +62,12 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-0 {
 			label = "i12_tvbox:red:usr";
 			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
 		};
 
-		blue {
+		led-1 {
 			label = "i12_tvbox:blue:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/sun7i-a20-itead-ibox.dts

@@ -53,13 +53,13 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_itead_core>;
 
-		green {
+		led-0 {
 			label = "itead_core:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		blue {
+		led-1 {
 			label = "itead_core:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts

@@ -75,7 +75,7 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "lamobo_r1:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/sun7i-a20-m3.dts

@@ -64,7 +64,7 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led {
 			label = "m3:blue:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts

@@ -75,7 +75,7 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "a20-olimex-som-evb:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts

@@ -46,19 +46,19 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		stat {
+		led-0 {
 			label = "a20-som204-evb:green:stat";
 			gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		led1 {
+		led-1 {
 			label = "a20-som204-evb:green:led1";
 			gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		led2 {
+		led-2 {
 			label = "a20-som204-evb:yellow:led2";
 			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts

@@ -78,7 +78,7 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		green {
+		led {
 			label = "a20-olinuxino-lime:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts

@@ -75,7 +75,7 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		green {
+		led {
 			label = "a20-olinuxino-lime2:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts

@@ -82,7 +82,7 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxino>;
 
-		green {
+		led {
 			label = "a20-olinuxino-micro:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts

@@ -75,12 +75,12 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-0 {
 			label = "orangepi:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 		};
 
-		blue {
+		led-1 {
 			label = "orangepi:blue:usr";
 			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
 		};

arch/arm/boot/dts/sun7i-a20-orangepi.dts

@@ -64,7 +64,7 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "orangepi:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 		};

arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts

@@ -72,14 +72,12 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		/* Marked "LED3" on the PCB. */
-		usr1 {
+		led-3 {
 			label = "pcduino3-nano:green:usr1";
 			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
 		};
 
-		/* Marked "LED4" on the PCB. */
-		usr2 {
+		led-4 {
 			label = "pcduino3-nano:green:usr2";
 			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
 		};

arch/arm/boot/dts/sun7i-a20-pcduino3.dts

@@ -64,12 +64,12 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		tx {
+		led-0 {
 			label = "pcduino3:green:tx";
 			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
 		};
 
-		rx {
+		led-1 {
 			label = "pcduino3:green:rx";
 			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
 		};

arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts

@@ -64,6 +64,7 @@ backlight {
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -140,7 +140,7 @@ cpu1: cpu@1 {
 	};
 
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -716,7 +716,7 @@ rtc: rtc@1f00000 {
 			#clock-cells = <1>;
 		};
 
-		nmi_intc: interrupt-controller@1f00c00 {
+		r_intc: interrupt-controller@1f00c00 {
 			compatible = "allwinner,sun6i-a31-r-intc";
 			interrupt-controller;
 			#interrupt-cells = <2>;

arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts

@@ -63,7 +63,7 @@ leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pin_d978>;
 
-		home {
+		led {
 			label = "d978:blue:home";
 			gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
 		};

arch/arm/boot/dts/sun8i-a33-olinuxino.dts

@@ -62,7 +62,7 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "a33-olinuxino:green:usr";
 			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -98,7 +98,7 @@ &r_rsb {
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;

arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts

@@ -63,6 +63,7 @@ chosen {
 
 	panel {
 		compatible = "netron-dy,e231732";
+		power-supply = <&reg_vcc3v3>;
 
 		port {
 			panel_input: endpoint {
@@ -164,7 +165,7 @@ &r_rsb {
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 	};

arch/arm/boot/dts/sun8i-a33.dtsi

@@ -288,7 +288,7 @@ dphy: d-phy@1ca1000 {
 	};
 
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;

arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts

@@ -74,12 +74,12 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "bananapi-m3:blue:usr";
 			gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-1 {
 			label = "bananapi-m3:green:usr";
 			gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts

@@ -74,22 +74,22 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "cubietruck-plus:blue:usr";
 			gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
 		};
 
-		orange {
+		led-1 {
 			label = "cubietruck-plus:orange:usr";
 			gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
 		};
 
-		white {
+		led-2 {
 			label = "cubietruck-plus:white:usr";
 			gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
 		};
 
-		green {
+		led-3 {
 			label = "cubietruck-plus:green:usr";
 			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
 		};

arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts

@@ -65,7 +65,7 @@ backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
-
+		power-supply = <&reg_sw>;
 		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
 		default-brightness-level = <9>;
 	};

arch/arm/boot/dts/sun8i-a83t.dtsi

@@ -1061,9 +1061,6 @@ csi: camera@1cb0000 {
 			clock-names = "bus", "mod", "ram";
 			resets = <&ccu RST_BUS_CSI>;
 			status = "disabled";
-
-			csi_in: port {
-			};
 		};
 
 		hdmi: hdmi@1ee0000 {

arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts

@@ -62,6 +62,35 @@ reg_vdd_cpux: vdd-cpux-regulator {
 		states = <1100000 0>, <1300000 1>;
 	};
 
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&reg_vcc1v2>;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
@@ -125,6 +154,7 @@ &uart1 {
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
 		clocks = <&rtc 1>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;

arch/arm/boot/dts/sun8i-h3-beelink-x2.dts

@@ -75,13 +75,13 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "beelink-x2:blue:pwr";
 			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
 			default-state = "on";
 		};
 
-		red {
+		led-1 {
 			label = "beelink-x2:red:standby";
 			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
 		};

arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts

@@ -25,13 +25,13 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		pwr {
+		led-0 {
 			label = "nanopi:red:pwr";
 			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
 			default-state = "on";
 		};
 
-		status {
+		led-1 {
 			label = "nanopi:green:status";
 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
 		};

arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts

@@ -61,13 +61,13 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		pwr {
+		led-0 {
 			label = "nanopi:green:pwr";
 			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
 			default-state = "on";
 		};
 
-		status {
+		led-1 {
 			label = "nanopi:blue:status";
 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
 		};

arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts

@@ -39,8 +39,8 @@ reg_vdd_cpux: gpio-regulator {
 		regulator-ramp-delay = <50>;
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
-		states = <1100000 0x0
-			  1300000 0x1>;
+		states = <1100000 0x0>,
+			 <1300000 0x1>;
 	};
 
 	wifi_pwrseq: wifi_pwrseq {

arch/arm/boot/dts/sun8i-h3-nanopi.dtsi

@@ -60,13 +60,13 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "nanopi:blue:status";
 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		pwr {
+		led-1 {
 			label = "nanopi:green:pwr";
 			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
 			default-state = "on";

arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts

@@ -73,13 +73,13 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		pwr {
+		led-0 {
 			label = "orangepi:green:pwr";
 			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		status {
+		led-1 {
 			label = "orangepi:red:status";
 			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts

@@ -64,17 +64,17 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "bpi-m2m:blue:usr";
 			gpios = <&pio 2 7 GPIO_ACTIVE_LOW>;
 		};
 
-		green {
+		led-1 {
 			label = "bpi-m2m:green:usr";
 			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>;
 		};
 
-		red {
+		led-2 {
 			label = "bpi-m2m:red:power";
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
 			default-state = "on";
@@ -163,7 +163,7 @@ &r_rsb {
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;

arch/arm/boot/dts/sun8i-r16-parrot.dts

@@ -64,14 +64,14 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		led1 {
+		led-1 {
 			label = "parrot:led1:usr";
-			gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
 		};
 
-		led2 {
+		led-2 {
 			label = "parrot:led2:usr";
-			gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+			gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
 		};
 	};
 
@@ -164,7 +164,7 @@ &r_rsb {
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;

arch/arm/boot/dts/sun8i-r40.dtsi

@@ -190,6 +190,25 @@ mixer1_out_tcon_top: endpoint {
 			};
 		};
 
+		deinterlace: deinterlace@1400000 {
+			compatible = "allwinner,sun8i-r40-deinterlace",
+				     "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01400000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 /*
+				  * NOTE: Contrary to what datasheet claims,
+				  * DRAM deinterlace gate doesn't exist and
+				  * it's shared with CSI1.
+				  */
+				 <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
 		syscon: system-control@1c00000 {
 			compatible = "allwinner,sun8i-r40-system-control",
 				     "allwinner,sun4i-a10-system-control";

arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi

@@ -54,6 +54,7 @@ backlight: backlight {
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		power-supply = <&reg_dc1sw>;
 	};
 
 	chosen {
@@ -92,7 +93,7 @@ &r_rsb {
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
+		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		drivevbus-supply = <&reg_vcc5v0>;

arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi

@@ -39,6 +39,6 @@ &usb_otg {
 };
 
 &usbphy {
-	usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };

arch/arm/boot/dts/sun8i-s3-pinecube.dts

@@ -64,9 +64,6 @@ &csi1 {
 	status = "okay";
 
 	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		csi1_ep: endpoint {
 			remote-endpoint = <&ov5640_ep>;
 			bus-width = <8>;
@@ -88,13 +85,9 @@ &i2c0 {
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp203",
-			     "x-powers,axp209";
 		reg = <0x34>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 

arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+#include "sun8i-v3-sl631.dtsi"
+
+/ {
+	model = "SL631 Action Camera with IMX179";
+	compatible = "allwinner,sl631-imx179", "allwinner,sl631",
+		     "allwinner,sun8i-v3";
+};

arch/arm/boot/dts/sun8i-v3-sl631.dtsi

+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+/dts-v1/;
+
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SL631 Action Camera";
+	compatible = "allwinner,sl631", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pb_pins>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-174 {
+		label = "Down";
+		linux,code = <KEY_DOWN>;
+		channel = <0>;
+		voltage = <174603>;
+	};
+
+	button-384 {
+		label = "Up";
+		linux,code = <KEY_UP>;
+		channel = <0>;
+		voltage = <384126>;
+	};
+
+	button-593 {
+		label = "OK";
+		linux,code = <KEY_OK>;
+		channel = <0>;
+		voltage = <593650>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	vmmc-supply = <&reg_dcdc3>;
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_dcdc3>;
+	vcc-pe-supply = <&reg_dcdc3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-sys-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vdd-3v3";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};

arch/arm/boot/dts/sun8i-v3s.dtsi

@@ -157,12 +157,21 @@ mixer0_out_tcon0: endpoint {
 		syscon: system-control@1c00000 {
 			compatible = "allwinner,sun8i-v3s-system-control",
 				     "allwinner,sun8i-h3-system-control";
-			reg = <0x01c00000 0x1000>;
+			reg = <0x01c00000 0xd0>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 		};
 
+		nmi_intc: interrupt-controller@1c000d0 {
+			compatible = "allwinner,sun8i-v3s-nmi",
+				     "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c000d0 0x0c>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		tcon0: lcd-controller@1c0c000 {
 			compatible = "allwinner,sun8i-v3s-tcon";
 			reg = <0x01c0c000 0x1000>;
@@ -328,6 +337,12 @@ pio: pinctrl@1c20800 {
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE20";
+				function = "csi_mipi";
+			};
+
 			/omit-if-no-ref/
 			csi1_8bit_pins: csi1-8bit-pins {
 				pins = "PE0", "PE2", "PE3", "PE8", "PE9",

arch/arm/boot/dts/sun9i-a80-cubieboard4.dts

@@ -63,12 +63,12 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-0 {
 			label = "cubieboard4:green:usr";
 			gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
 		};
 
-		red {
+		led-1 {
 			label = "cubieboard4:red:usr";
 			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
 		};

arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi

@@ -219,6 +219,7 @@ &uart1 {
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
 		clocks = <&rtc 1>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;

arch/arm64/boot/dts/allwinner/Makefile

@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab-early-adopter.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb

arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts

@@ -36,18 +36,18 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		pwr-led {
+		led-0 {
 			label = "bananapi-m64:red:pwr";
 			gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
 			default-state = "on";
 		};
 
-		green {
+		led-1 {
 			label = "bananapi-m64:green:user";
 			gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */
 		};
 
-		blue {
+		led-2 {
 			label = "bananapi-m64:blue:user";
 			gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
 		};

arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts

@@ -35,7 +35,7 @@ hdmi_con_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led {
 			label = "nanopi-a64:blue:status";
 			gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
 		};

arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts

 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 // Copyright (c) 2018 ARM Ltd.
 
+#include <dt-bindings/leds/common.h>
 #include "sun50i-a64-sopine-baseboard.dts"
 
 / {
 	model = "Pine64 LTS";
 	compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
 		     "allwinner,sun50i-a64";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		};
+	};
 };

arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts

@@ -126,8 +126,6 @@ &de {
 };
 
 &ehci0 {
-	phys = <&usbphy 0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
@@ -169,6 +167,7 @@ &mmc2 {
 	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
 	vmmc-supply = <&reg_dcdc1>;
 	vqmmc-supply = <&reg_eldo1>;
+	max-frequency = <200000000>;
 	bus-width = <8>;
 	non-removable;
 	cap-mmc-hw-reset;
@@ -177,8 +176,6 @@ &mmc2 {
 };
 
 &ohci0 {
-	phys = <&usbphy 0>;
-	phy-names = "usb";
 	status = "okay";
 };
 

arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts

@@ -7,7 +7,7 @@
 
 / {
 	model = "Pine64 PinePhone Developer Batch (1.0)";
-	compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64";
+	compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64";
 };
 
 &sgm3140 {

arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts

@@ -7,7 +7,7 @@
 
 / {
 	model = "Pine64 PinePhone Braveheart (1.1)";
-	compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
+	compatible = "pine64,pinephone-1.1", "pine64,pinephone", "allwinner,sun50i-a64";
 };
 
 &backlight {

arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts

@@ -7,7 +7,7 @@
 
 / {
 	model = "Pine64 PinePhone (1.2)";
-	compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64";
+	compatible = "pine64,pinephone-1.2", "pine64,pinephone", "allwinner,sun50i-a64";
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";

arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi

@@ -21,6 +21,7 @@ backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
 		enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+		power-supply = <&reg_ps>;
 		/* Backlight configuration differs per PinePhone revision. */
 	};
 
@@ -31,25 +32,33 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
 		};
 
-		green {
+		led-1 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
 		};
 
-		red {
+		led-2 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_RED>;
 			gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
 		};
 	};
 
+	reg_ps: ps-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ps";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
 	reg_vbat_wifi: vbat-wifi {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
@@ -174,8 +183,6 @@ light-sensor@48 {
 		reg = <0x48>;
 		interrupt-parent = <&pio>;
 		interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */
-		vdd-supply = <&reg_ldo_io0>;
-		leda-supply = <&reg_dldo1>;
 	};
 
 	/* Accelerometer/gyroscope */
@@ -196,6 +203,7 @@ &i2c2 {
 
 &lradc {
 	vref-supply = <&reg_aldo3>;
+	wakeup-source;
 	status = "okay";
 
 	button-200 {

arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Icenowy Zheng <icenowy@aosc.io>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64-pinetab.dts"
+
+/ {
+	model = "PineTab, Early Adopter's version";
+	compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64";
+};
+
+&dsi {
+	/delete-node/ panel@0;
+
+	panel@0 {
+		compatible = "feixin,k101-im2byl02", "ilitek,ili9881c";
+		reg = <0>;
+		power-supply = <&reg_dc1sw>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		backlight = <&backlight>;
+	};
+};

arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts

@@ -14,7 +14,7 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	model = "PineTab";
+	model = "PineTab, Development Sample";
 	compatible = "pine64,pinetab", "allwinner,sun50i-a64";
 
 	aliases {

arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts

@@ -111,6 +111,7 @@ &mmc2 {
 	bus-width = <8>;
 	non-removable;
 	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
 	status = "okay";
 };
 

arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi

@@ -32,7 +32,6 @@ &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_dcdc1>;
-	non-removable;
 	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */