i2c: i801: Add SMBUS_LEN_SENTINEL

Add a sentinel length value that is used to check whether we should
read and use the length value provided by the slave device.
This simplifies the currently used checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

drivers/i2c/busses/i2c-i801.c

@@ -205,6 +205,8 @@
 #define STATUS_FLAGS		(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
 				 STATUS_ERROR_FLAGS)
 
+#define SMBUS_LEN_SENTINEL (I2C_SMBUS_BLOCK_MAX + 1)
+
 /* Older devices have their ID defined in <linux/pci_ids.h> */
 #define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS		0x02a3
 #define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS		0x06a3
@@ -541,9 +543,12 @@ static int i801_block_transaction_by_block(struct i801_priv *priv,
 static void i801_isr_byte_done(struct i801_priv *priv)
 {
 	if (priv->is_read) {
-		/* For SMBus block reads, length is received with first byte */
-		if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
-		    (priv->count == 0)) {
+		/*
+		 * At transfer start i801_smbus_block_transaction() marks
+		 * the block length as invalid. Check for this sentinel value
+		 * and read the block length from SMBHSTDAT0.
+		 */
+		if (priv->len == SMBUS_LEN_SENTINEL) {
 			priv->len = inb_p(SMBHSTDAT0(priv));
 			if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
 				dev_err(&priv->pci_dev->dev,
@@ -698,8 +703,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 		if (status)
 			return status;
 
-		if (i == 1 && read_write == I2C_SMBUS_READ
-		 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
+		/*
+		 * At transfer start i801_smbus_block_transaction() marks
+		 * the block length as invalid. Check for this sentinel value
+		 * and read the block length from SMBHSTDAT0.
+		 */
+		if (len == SMBUS_LEN_SENTINEL) {
 			len = inb_p(SMBHSTDAT0(priv));
 			if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
 				dev_err(&priv->pci_dev->dev,
@@ -806,7 +815,8 @@ static int i801_smbus_block_transaction(struct i801_priv *priv, union i2c_smbus_
 					u8 addr, u8 hstcmd, char read_write, int command)
 {
 	if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
-		data->block[0] = I2C_SMBUS_BLOCK_MAX;
+		/* Mark block length as invalid */
+		data->block[0] = SMBUS_LEN_SENTINEL;
 	else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
 		return -EPROTO;