Commit 2a33d934 authored by Jani Nikula's avatar Jani Nikula

drm/i915/bios: add support for MIPI sequence block v3

The changes since the sequence block v2 are:

* The whole MIPI bios data block has a separate 32-bit size field since
  v3, stored after the version. This facilitates big sequences.

* The size of the panel specific sequence blocks has grown to 32
  bits. This facilitates big sequences.

* The elements within sequences now have an 8-bit size field following
  the operation byte. This facilitates skipping unknown new operation
  bytes, i.e. forward compatibility.

v2 (of the patch): use DRM_ERROR for unknown operation byte
v3 (of the patch): even more bounds checking (Ville)
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452518102-3154-1-git-send-email-jani.nikula@intel.com
parent 4b42dfbb
......@@ -754,21 +754,33 @@ parse_mipi_config(struct drm_i915_private *dev_priv,
/* Find the sequence block and size for the given panel. */
static const u8 *
find_panel_sequence_block(const struct bdb_mipi_sequence *sequence,
u16 panel_id, u16 *seq_size)
u16 panel_id, u32 *seq_size)
{
u32 total = get_blocksize(sequence);
const u8 *data = &sequence->data[0];
u8 current_id;
u16 current_size;
u32 current_size;
int header_size = sequence->version >= 3 ? 5 : 3;
int index = 0;
int i;
for (i = 0; i < MAX_MIPI_CONFIGURATIONS && index + 3 < total; i++) {
/* skip new block size */
if (sequence->version >= 3)
data += 4;
for (i = 0; i < MAX_MIPI_CONFIGURATIONS && index < total; i++) {
if (index + header_size > total) {
DRM_ERROR("Invalid sequence block (header)\n");
return NULL;
}
current_id = *(data + index);
index++;
if (sequence->version >= 3)
current_size = *((const u32 *)(data + index + 1));
else
current_size = *((const u16 *)(data + index + 1));
current_size = *((const u16 *)(data + index));
index += 2;
index += header_size;
if (index + current_size > total) {
DRM_ERROR("Invalid sequence block\n");
......@@ -826,13 +838,71 @@ static int goto_next_sequence(const u8 *data, int index, int total)
return 0;
}
static int goto_next_sequence_v3(const u8 *data, int index, int total)
{
int seq_end;
u16 len;
/*
* Could skip sequence based on Size of Sequence alone, but also do some
* checking on the structure.
*/
if (total < 5) {
DRM_ERROR("Too small sequence size\n");
return 0;
}
seq_end = index + *((const u32 *)(data + 1));
if (seq_end > total) {
DRM_ERROR("Invalid sequence size\n");
return 0;
}
/* Skip Sequence Byte and Size of Sequence. */
for (index = index + 5; index < total; index += len) {
u8 operation_byte = *(data + index);
index++;
if (operation_byte == MIPI_SEQ_ELEM_END) {
if (index != seq_end) {
DRM_ERROR("Invalid element structure\n");
return 0;
}
return index;
}
len = *(data + index);
index++;
/*
* FIXME: Would be nice to check elements like for v1/v2 in
* goto_next_sequence() above.
*/
switch (operation_byte) {
case MIPI_SEQ_ELEM_SEND_PKT:
case MIPI_SEQ_ELEM_DELAY:
case MIPI_SEQ_ELEM_GPIO:
case MIPI_SEQ_ELEM_I2C:
case MIPI_SEQ_ELEM_SPI:
case MIPI_SEQ_ELEM_PMIC:
break;
default:
DRM_ERROR("Unknown operation byte %u\n",
operation_byte);
break;
}
}
return 0;
}
static void
parse_mipi_sequence(struct drm_i915_private *dev_priv,
const struct bdb_header *bdb)
{
const struct bdb_mipi_sequence *sequence;
const u8 *seq_data;
u16 seq_size;
u32 seq_size;
u8 *data;
int index = 0;
......@@ -847,12 +917,13 @@ parse_mipi_sequence(struct drm_i915_private *dev_priv,
}
/* Fail gracefully for forward incompatible sequence block. */
if (sequence->version >= 3) {
DRM_ERROR("Unable to parse MIPI Sequence Block v3+\n");
if (sequence->version >= 4) {
DRM_ERROR("Unable to parse MIPI Sequence Block v%u\n",
sequence->version);
return;
}
DRM_DEBUG_DRIVER("Found MIPI sequence block\n");
DRM_DEBUG_DRIVER("Found MIPI sequence block v%u\n", sequence->version);
seq_data = find_panel_sequence_block(sequence, panel_type, &seq_size);
if (!seq_data)
......@@ -875,7 +946,10 @@ parse_mipi_sequence(struct drm_i915_private *dev_priv,
dev_priv->vbt.dsi.sequence[seq_id] = data + index;
index = goto_next_sequence(data, index, seq_size);
if (sequence->version >= 3)
index = goto_next_sequence_v3(data, index, seq_size);
else
index = goto_next_sequence(data, index, seq_size);
if (!index) {
DRM_ERROR("Invalid sequence %u\n", seq_id);
goto err;
......
......@@ -267,6 +267,7 @@ static const char *sequence_name(enum mipi_seq seq_id)
static void generic_exec_sequence(struct intel_dsi *intel_dsi, const u8 *data)
{
struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
fn_mipi_elem_exec mipi_elem_exec;
if (!data)
......@@ -278,6 +279,10 @@ static void generic_exec_sequence(struct intel_dsi *intel_dsi, const u8 *data)
/* go to the first element of the sequence */
data++;
/* Skip Size of Sequence. */
if (dev_priv->vbt.dsi.seq_version >= 3)
data += 4;
/* parse each byte till we reach end of sequence byte - 0x00 */
while (1) {
u8 operation_byte = *data++;
......@@ -289,6 +294,10 @@ static void generic_exec_sequence(struct intel_dsi *intel_dsi, const u8 *data)
}
mipi_elem_exec = exec_elem[operation_byte];
/* Skip Size of Operation. */
if (dev_priv->vbt.dsi.seq_version >= 3)
data++;
/* execute the element specific rotines */
data = mipi_elem_exec(intel_dsi, data);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment