Merge bk://gkernel.bkbits.net/libata-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

drivers/scsi/Kconfig

@@ -434,10 +434,18 @@ config SCSI_ATA_PIIX
 	  If unsure, say N.
 
 config SCSI_SATA_PROMISE
-	tristate "Promise SATA support"
+	tristate "Promise SATA TX2/TX4 support"
+	depends on SCSI_SATA && PCI
+	help
+	  This option enables support for Promise Serial ATA TX2/TX4.
+
+	  If unsure, say N.
+
+config SCSI_SATA_SX4
+	tristate "Promise SATA SX4 support"
 	depends on SCSI_SATA && PCI && EXPERIMENTAL
 	help
-	  This option enables support for Promise Serial ATA.
+	  This option enables support for Promise Serial ATA SX4.
 
 	  If unsure, say N.
 

drivers/scsi/Makefile

@@ -126,6 +126,7 @@ obj-$(CONFIG_SCSI_SATA_SIL)	+= libata.o sata_sil.o
 obj-$(CONFIG_SCSI_SATA_VIA)	+= libata.o sata_via.o
 obj-$(CONFIG_SCSI_SATA_VITESSE)	+= libata.o sata_vsc.o
 obj-$(CONFIG_SCSI_SATA_SIS)	+= libata.o sata_sis.o
+obj-$(CONFIG_SCSI_SATA_SX4)	+= libata.o sata_sx4.o
 
 obj-$(CONFIG_ARM)		+= arm/
 

drivers/scsi/libata-scsi.c

@@ -167,8 +167,27 @@ int ata_scsi_slave_config(struct scsi_device *sdev)
 {
 	sdev->use_10_for_rw = 1;
 	sdev->use_10_for_ms = 1;
+
 	blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD);
 
+	if (sdev->id < ATA_MAX_DEVICES) {
+		struct ata_port *ap;
+		struct ata_device *dev;
+
+		ap = (struct ata_port *) &sdev->host->hostdata[0];
+		dev = &ap->device[sdev->id];
+
+		/* TODO: 1024 is an arbitrary number, not the
+		 * hardware maximum.  This should be increased to
+		 * 65534 when Jens Axboe's patch for dynamically
+		 * determining max_sectors is merged.
+		 */
+		if (dev->flags & ATA_DFLAG_LBA48) {
+			sdev->host->max_sectors = 2048;
+			blk_queue_max_sectors(sdev->request_queue, 2048);
+		}
+	}
+
 	return 0;	/* scsi layer doesn't check return value, sigh */
 }
 
@@ -884,8 +903,7 @@ static void atapi_scsi_queuecmd(struct ata_port *ap, struct ata_device *dev,
 			       struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct ata_queued_cmd *qc;
-	u8 *scsicmd = cmd->cmnd, status;
-	unsigned int doing_dma = 0;
+	u8 *scsicmd = cmd->cmnd;
 
 	VPRINTK("ENTER, drv_stat = 0x%x\n", ata_chk_status(ap));
 
@@ -925,52 +943,17 @@ static void atapi_scsi_queuecmd(struct ata_port *ap, struct ata_device *dev,
 
 	qc->tf.command = ATA_CMD_PACKET;
 
-	/* set up SG table */
 	if (cmd->sc_data_direction == SCSI_DATA_NONE) {
-		ap->active_tag = qc->tag;
-		qc->flags |= ATA_QCFLAG_ACTIVE | ATA_QCFLAG_POLL;
 		qc->tf.protocol = ATA_PROT_ATAPI;
-
-		ata_dev_select(ap, dev->devno, 1, 0);
-
-		DPRINTK("direction: none\n");
+		qc->flags |= ATA_QCFLAG_POLL;
 		qc->tf.ctl |= ATA_NIEN;	/* disable interrupts */
-		ata_tf_to_host_nolock(ap, &qc->tf);
 	} else {
-		qc->flags |= ATA_QCFLAG_SG; /* data is present; dma-map it */
-		qc->tf.feature = ATAPI_PKT_DMA;
 		qc->tf.protocol = ATA_PROT_ATAPI_DMA;
-
-		doing_dma = 1;
-
-		/* select device, send command to hardware */
-		if (ata_qc_issue(qc))
-			goto err_out;
-	}
-
-	status = ata_busy_wait(ap, ATA_BUSY, 1000);
-	if (status & ATA_BUSY) {
-		ata_thread_wake(ap, THR_PACKET);
-		return;
+		qc->flags |= ATA_QCFLAG_SG; /* data is present; dma-map it */
+		qc->tf.feature |= ATAPI_PKT_DMA;
 	}
-	if ((status & ATA_DRQ) == 0)
-		goto err_out;
 
-	/* FIXME: mmio-ize */
-	DPRINTK("writing cdb\n");
-	outsl(ap->ioaddr.data_addr, scsicmd, ap->host->max_cmd_len / 4);
-
-	if (!doing_dma)
-		ata_thread_wake(ap, THR_PACKET);
-
-	VPRINTK("EXIT\n");
-	return;
-
-err_out:
-	if (!doing_dma)
-		ata_irq_on(ap);	/* re-enable interrupts */
-	ata_bad_cdb(cmd, done);
-	DPRINTK("EXIT - badcmd\n");
+	atapi_start(qc);
 }
 
 /**

drivers/scsi/libata.h

@@ -35,7 +35,6 @@ struct ata_scsi_args {
 	void			(*done)(struct scsi_cmnd *);
 };
 
-
 /* libata-core.c */
 extern void ata_dev_id_string(struct ata_device *dev, unsigned char *s,
 			      unsigned int ofs, unsigned int len);
@@ -45,7 +44,7 @@ extern int ata_qc_issue(struct ata_queued_cmd *qc);
 extern void ata_dev_select(struct ata_port *ap, unsigned int device,
                            unsigned int wait, unsigned int can_sleep);
 extern void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf);
-extern void ata_thread_wake(struct ata_port *ap, unsigned int thr_state);
+extern void atapi_start(struct ata_queued_cmd *qc);
 
 
 /* libata-scsi.c */

drivers/scsi/sata_promise.h

+/*
+ *  sata_promise.h - Promise SATA common definitions and inline funcs
+ *
+ *  Copyright 2003-2004 Red Hat, Inc.
+ *
+ *  The contents of this file are subject to the Open
+ *  Software License version 1.1 that can be found at
+ *  http://www.opensource.org/licenses/osl-1.1.txt and is included herein
+ *  by reference.
+ *
+ *  Alternatively, the contents of this file may be used under the terms
+ *  of the GNU General Public License version 2 (the "GPL") as distributed
+ *  in the kernel source COPYING file, in which case the provisions of
+ *  the GPL are applicable instead of the above.  If you wish to allow
+ *  the use of your version of this file only under the terms of the
+ *  GPL and not to allow others to use your version of this file under
+ *  the OSL, indicate your decision by deleting the provisions above and
+ *  replace them with the notice and other provisions required by the GPL.
+ *  If you do not delete the provisions above, a recipient may use your
+ *  version of this file under either the OSL or the GPL.
+ *
+ */
+
+#ifndef __SATA_PROMISE_H__
+#define __SATA_PROMISE_H__
+
+#include <linux/ata.h>
+
+enum pdc_packet_bits {
+	PDC_PKT_READ		= (1 << 2),
+	PDC_PKT_NODATA		= (1 << 3),
+
+	PDC_PKT_SIZEMASK	= (1 << 7) | (1 << 6) | (1 << 5),
+	PDC_PKT_CLEAR_BSY	= (1 << 4),
+	PDC_PKT_WAIT_DRDY	= (1 << 3) | (1 << 4),
+	PDC_LAST_REG		= (1 << 3),
+
+	PDC_REG_DEVCTL		= (1 << 3) | (1 << 2) | (1 << 1),
+};
+
+static inline unsigned int pdc_pkt_header(struct ata_taskfile *tf,
+					  dma_addr_t sg_table,
+					  unsigned int devno, u8 *buf)
+{
+	u8 dev_reg;
+	u32 *buf32 = (u32 *) buf;
+
+	/* set control bits (byte 0), zero delay seq id (byte 3),
+	 * and seq id (byte 2)
+	 */
+	switch (tf->protocol) {
+	case ATA_PROT_DMA:
+		if (!(tf->flags & ATA_TFLAG_WRITE))
+			buf32[0] = cpu_to_le32(PDC_PKT_READ);
+		else
+			buf32[0] = 0;
+		break;
+
+	case ATA_PROT_NODATA:
+		buf32[0] = cpu_to_le32(PDC_PKT_NODATA);
+		break;
+
+	default:
+		BUG();
+		break;
+	}
+
+	buf32[1] = cpu_to_le32(sg_table);	/* S/G table addr */
+	buf32[2] = 0;				/* no next-packet */
+
+	if (devno == 0)
+		dev_reg = ATA_DEVICE_OBS;
+	else
+		dev_reg = ATA_DEVICE_OBS | ATA_DEV1;
+
+	/* select device */
+	buf[12] = (1 << 5) | PDC_PKT_CLEAR_BSY | ATA_REG_DEVICE;
+	buf[13] = dev_reg;
+
+	/* device control register */
+	buf[14] = (1 << 5) | PDC_REG_DEVCTL;
+	buf[15] = tf->ctl;
+
+	return 16; 	/* offset of next byte */
+}
+
+static inline unsigned int pdc_pkt_footer(struct ata_taskfile *tf, u8 *buf,
+				  unsigned int i)
+{
+	if (tf->flags & ATA_TFLAG_DEVICE) {
+		buf[i++] = (1 << 5) | ATA_REG_DEVICE;
+		buf[i++] = tf->device;
+	}
+
+	/* and finally the command itself; also includes end-of-pkt marker */
+	buf[i++] = (1 << 5) | PDC_LAST_REG | ATA_REG_CMD;
+	buf[i++] = tf->command;
+
+	return i;
+}
+
+static inline unsigned int pdc_prep_lba28(struct ata_taskfile *tf, u8 *buf, unsigned int i)
+{
+	/* the "(1 << 5)" should be read "(count << 5)" */
+
+	/* ATA command block registers */
+	buf[i++] = (1 << 5) | ATA_REG_FEATURE;
+	buf[i++] = tf->feature;
+
+	buf[i++] = (1 << 5) | ATA_REG_NSECT;
+	buf[i++] = tf->nsect;
+
+	buf[i++] = (1 << 5) | ATA_REG_LBAL;
+	buf[i++] = tf->lbal;
+
+	buf[i++] = (1 << 5) | ATA_REG_LBAM;
+	buf[i++] = tf->lbam;
+
+	buf[i++] = (1 << 5) | ATA_REG_LBAH;
+	buf[i++] = tf->lbah;
+
+	return i;
+}
+
+static inline unsigned int pdc_prep_lba48(struct ata_taskfile *tf, u8 *buf, unsigned int i)
+{
+	/* the "(2 << 5)" should be read "(count << 5)" */
+
+	/* ATA command block registers */
+	buf[i++] = (2 << 5) | ATA_REG_FEATURE;
+	buf[i++] = tf->hob_feature;
+	buf[i++] = tf->feature;
+
+	buf[i++] = (2 << 5) | ATA_REG_NSECT;
+	buf[i++] = tf->hob_nsect;
+	buf[i++] = tf->nsect;
+
+	buf[i++] = (2 << 5) | ATA_REG_LBAL;
+	buf[i++] = tf->hob_lbal;
+	buf[i++] = tf->lbal;
+
+	buf[i++] = (2 << 5) | ATA_REG_LBAM;
+	buf[i++] = tf->hob_lbam;
+	buf[i++] = tf->lbam;
+
+	buf[i++] = (2 << 5) | ATA_REG_LBAH;
+	buf[i++] = tf->hob_lbah;
+	buf[i++] = tf->lbah;
+
+	return i;
+}
+
+
+#endif /* __SATA_PROMISE_H__ */

drivers/scsi/sata_sis.c

@@ -56,7 +56,8 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 
 static struct pci_device_id sis_pci_tbl[] = {
-	{ PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
+	{ PCI_VENDOR_ID_SI, 0x180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
+	{ PCI_VENDOR_ID_SI, 0x181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
 	{ }	/* terminate list */
 };
 

include/linux/libata.h

@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <asm/io.h>
 #include <linux/ata.h>
+#include <linux/workqueue.h>
 
 /*
  * compile-time options
@@ -113,9 +114,6 @@ enum {
 	ATA_QCFLAG_SG		= (1 << 4), /* have s/g table? */
 	ATA_QCFLAG_POLL		= (1 << 5), /* polling, no interrupts */
 
-	/* struct ata_engine atomic flags (use test_bit, etc.) */
-	ATA_EFLG_ACTIVE		= 0,	/* engine is active */
-
 	/* various lengths of time */
 	ATA_TMOUT_EDD		= 5 * HZ,	/* hueristic */
 	ATA_TMOUT_PIO		= 30 * HZ,
@@ -144,13 +142,6 @@ enum {
 	THR_IDLE		= (THR_PROBE_FAILED + 1),
 	THR_PROBE_SUCCESS	= (THR_IDLE + 1),
 	THR_PROBE_START		= (THR_PROBE_SUCCESS + 1),
-	THR_PIO_POLL		= (THR_PROBE_START + 1),
-	THR_PIO_TMOUT		= (THR_PIO_POLL + 1),
-	THR_PIO			= (THR_PIO_TMOUT + 1),
-	THR_PIO_LAST		= (THR_PIO + 1),
-	THR_PIO_LAST_POLL	= (THR_PIO_LAST + 1),
-	THR_PIO_ERR		= (THR_PIO_LAST_POLL + 1),
-	THR_PACKET		= (THR_PIO_ERR + 1),
 
 	/* SATA port states */
 	PORT_UNKNOWN		= 0,
@@ -163,6 +154,17 @@ enum {
 	ATA_QCFLAG_TIMEOUT	= (1 << 0),
 };
 
+enum pio_task_states {
+	PIO_ST_UNKNOWN,
+	PIO_ST_IDLE,
+	PIO_ST_POLL,
+	PIO_ST_TMOUT,
+	PIO_ST,
+	PIO_ST_LAST,
+	PIO_ST_LAST_POLL,
+	PIO_ST_ERR,
+};
+
 /* forward declarations */
 struct scsi_device;
 struct ata_port_operations;
@@ -224,7 +226,6 @@ struct ata_queued_cmd {
 	struct scsi_cmnd	*scsicmd;
 	void			(*scsidone)(struct scsi_cmnd *);
 
-	struct list_head	node;
 	unsigned long		flags;		/* ATA_QCFLAG_xxx */
 	unsigned int		tag;
 	unsigned int		n_elem;
@@ -239,7 +240,7 @@ struct ata_queued_cmd {
 
 	ata_qc_cb_t		callback;
 
-	struct semaphore	sem;
+	struct completion	*waiting;
 
 	void			*private_data;
 };
@@ -271,11 +272,6 @@ struct ata_device {
 	u8			write_cmd;	/* opcode to use on write */
 };
 
-struct ata_engine {
-	unsigned long		flags;
-	struct list_head	q;
-};
-
 struct ata_port {
 	struct Scsi_Host	*host;	/* our co-allocated scsi host */
 	struct ata_port_operations	*ops;
@@ -296,8 +292,6 @@ struct ata_port {
 	unsigned int		udma_mask;
 	unsigned int		cbl;	/* cable type; ATA_CBL_xxx */
 
-	struct ata_engine	eng;
-
 	struct ata_device	device[ATA_MAX_DEVICES];
 
 	struct ata_queued_cmd	qcmd[ATA_MAX_QUEUE];
@@ -307,16 +301,17 @@ struct ata_port {
 	struct ata_host_stats	stats;
 	struct ata_host_set	*host_set;
 
-	struct semaphore	sem;
 	struct semaphore	probe_sem;
 
 	unsigned int		thr_state;
-	int			time_to_die;
-	pid_t			thr_pid;
-	struct completion	thr_exited;
-	struct semaphore	thr_sem;
-	struct timer_list	thr_timer;
-	unsigned long		thr_timeout;
+
+	struct work_struct	packet_task;
+
+	struct work_struct	pio_task;
+	unsigned int		pio_task_state;
+	unsigned long		pio_task_timeout;
+
+	struct work_struct	probe_task;
 
 	void			*private_data;
 };
@@ -392,6 +387,8 @@ extern void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf);
 extern void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf);
 extern void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf);
 extern void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf);
+extern void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp);
+extern void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf);
 extern u8 ata_check_status_pio(struct ata_port *ap);
 extern u8 ata_check_status_mmio(struct ata_port *ap);
 extern void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf);

include/linux/pci_ids.h

@@ -574,7 +574,6 @@
 #define PCI_DEVICE_ID_SI_503		0x0008
 #define PCI_DEVICE_ID_SI_ACPI		0x0009
 #define PCI_DEVICE_ID_SI_LPC		0x0018
-#define PCI_DEVICE_ID_SI_180		0x0180
 #define PCI_DEVICE_ID_SI_5597_VGA	0x0200
 #define PCI_DEVICE_ID_SI_6205		0x0205
 #define PCI_DEVICE_ID_SI_501		0x0406