Commit 2a8c0883 authored by John Stultz's avatar John Stultz Committed by Thomas Gleixner

time: Move xtime_nsec adjustment underflow handling timekeeping_adjust

When we make adjustments speeding up the clock, its possible
for xtime_nsec to underflow. We already handle this properly,
but we do so from update_wall_time() instead of the more logical
timekeeping_adjust(), where the possible underflow actually
occurs.

Thus, move the correction logic to the timekeeping_adjust, which
is the function that causes the issue. Making update_wall_time()
more readable.
Signed-off-by: default avatarJohn Stultz <johnstul@us.ibm.com>
Reviewed-by: default avatarIngo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1342156917-25092-8-git-send-email-john.stultz@linaro.orgSigned-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent f2a5a085
...@@ -980,6 +980,27 @@ static void timekeeping_adjust(s64 offset) ...@@ -980,6 +980,27 @@ static void timekeeping_adjust(s64 offset)
timekeeper.xtime_nsec -= offset; timekeeper.xtime_nsec -= offset;
timekeeper.ntp_error -= (interval - offset) << timekeeper.ntp_error -= (interval - offset) <<
timekeeper.ntp_error_shift; timekeeper.ntp_error_shift;
/*
* It may be possible that when we entered this function, xtime_nsec
* was very small. Further, if we're slightly speeding the clocksource
* in the code above, its possible the required corrective factor to
* xtime_nsec could cause it to underflow.
*
* Now, since we already accumulated the second, cannot simply roll
* the accumulated second back, since the NTP subsystem has been
* notified via second_overflow. So instead we push xtime_nsec forward
* by the amount we underflowed, and add that amount into the error.
*
* We'll correct this error next time through this function, when
* xtime_nsec is not as small.
*/
if (unlikely((s64)timekeeper.xtime_nsec < 0)) {
s64 neg = -(s64)timekeeper.xtime_nsec;
timekeeper.xtime_nsec = 0;
timekeeper.ntp_error += neg << timekeeper.ntp_error_shift;
}
} }
...@@ -1105,27 +1126,6 @@ static void update_wall_time(void) ...@@ -1105,27 +1126,6 @@ static void update_wall_time(void)
/* correct the clock when NTP error is too big */ /* correct the clock when NTP error is too big */
timekeeping_adjust(offset); timekeeping_adjust(offset);
/*
* Since in the loop above, we accumulate any amount of time
* in xtime_nsec over a second into xtime.tv_sec, its possible for
* xtime_nsec to be fairly small after the loop. Further, if we're
* slightly speeding the clocksource up in timekeeping_adjust(),
* its possible the required corrective factor to xtime_nsec could
* cause it to underflow.
*
* Now, we cannot simply roll the accumulated second back, since
* the NTP subsystem has been notified via second_overflow. So
* instead we push xtime_nsec forward by the amount we underflowed,
* and add that amount into the error.
*
* We'll correct this error next time through this function, when
* xtime_nsec is not as small.
*/
if (unlikely((s64)timekeeper.xtime_nsec < 0)) {
s64 neg = -(s64)timekeeper.xtime_nsec;
timekeeper.xtime_nsec = 0;
timekeeper.ntp_error += neg << timekeeper.ntp_error_shift;
}
/* /*
* Store only full nanoseconds into xtime_nsec after rounding * Store only full nanoseconds into xtime_nsec after rounding
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment