arm64: dts: qcom: Use correct naming for dwc3 usb nodes in dts files

The dwc3 usb nodes in several arm64 qcom dts are currently named
differently, somewhere as 'usb@<addr>' and somewhere as 'dwc3@<addr>',
leading to some confusion when one sees the entries in sysfs or
dmesg:
[    1.943482] dwc3 a600000.usb: Adding to iommu group 1
[    2.266127] dwc3 a800000.dwc3: Adding to iommu group 2

Name the usb nodes as 'usb@<addr>' for consistency, which is
the correct convention as per the 'snps,dwc3' dt-binding as
well (see [1]).

[1]. Documentation/devicetree/bindings/usb/snps,dwc3.yaml

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210627114616.717101-2-bhupesh.sharma@linaro.org
[bjorn: Extended to also fix ipq6018]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/ipq6018.dtsi

@@ -557,7 +557,7 @@ usb2: usb2@7000000 {
 			resets = <&gcc GCC_USB1_BCR>;
 			status = "disabled";
 
-			dwc_1: dwc3@7000000 {
+			dwc_1: usb@7000000 {
 			       compatible = "snps,dwc3";
 			       reg = <0x0 0x7000000 0x0 0xcd00>;
 			       interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/qcom/msm8994.dtsi

@@ -430,7 +430,7 @@ usb3: usb@f92f8800 {
 			power-domains = <&gcc USB30_GDSC>;
 			qcom,select-utmi-as-pipe-clk;
 
-			dwc3@f9200000 {
+			usb@f9200000 {
 				compatible = "snps,dwc3";
 				reg = <0xf9200000 0xcc00>;
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/qcom/sm8150.dtsi

@@ -2709,7 +2709,7 @@ usb_2: usb@a8f8800 {
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
-			usb_2_dwc3: dwc3@a800000 {
+			usb_2_dwc3: usb@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a800000 0 0xcd00>;
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/qcom/sm8250.dtsi

@@ -2321,7 +2321,7 @@ usb_1: usb@a6f8800 {
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			usb_1_dwc3: dwc3@a600000 {
+			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
@@ -2372,7 +2372,7 @@ usb_2: usb@a8f8800 {
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
-			usb_2_dwc3: dwc3@a800000 {
+			usb_2_dwc3: usb@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a800000 0 0xcd00>;
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/qcom/sm8350.dtsi

@@ -1273,7 +1273,7 @@ usb_1: usb@a6f8800 {
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			usb_1_dwc3: dwc3@a600000 {
+			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
@@ -1317,7 +1317,7 @@ usb_2: usb@a8f8800 {
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
-			usb_2_dwc3: dwc3@a800000 {
+			usb_2_dwc3: usb@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a800000 0 0xcd00>;
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;