mwl8k: separate driver and device info reporting during probe

Only print the driver version once, and condense all per-PHY
information to a single line.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/mwl8k.c

@@ -164,7 +164,7 @@ struct mwl8k_priv {
 
 	u16 num_mcaddrs;
 	u8 hw_rev;
-	__le32 fw_rev;
+	u32 fw_rev;
 
 	/*
 	 * Running count of TX packets in flight, to avoid
@@ -2825,11 +2825,16 @@ static void mwl8k_finalize_join_worker(struct work_struct *work)
 static int __devinit mwl8k_probe(struct pci_dev *pdev,
 				 const struct pci_device_id *id)
 {
+	static int printed_version = 0;
 	struct ieee80211_hw *hw;
 	struct mwl8k_priv *priv;
 	int rc;
 	int i;
-	u8 *fw;
+
+	if (!printed_version) {
+		printk(KERN_INFO "%s version %s\n", MWL8K_DESC, MWL8K_VERSION);
+		printed_version = 1;
+	}
 
 	rc = pci_enable_device(pdev);
 	if (rc) {
@@ -3004,13 +3009,11 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 		goto err_stop_firmware;
 	}
 
-	fw = (u8 *)&priv->fw_rev;
-	printk(KERN_INFO "%s: 88W%u %s\n", priv->name, priv->part_num,
-		MWL8K_DESC);
-	printk(KERN_INFO "%s: Driver Ver:%s  Firmware Ver:%u.%u.%u.%u\n",
-		priv->name, MWL8K_VERSION, fw[3], fw[2], fw[1], fw[0]);
-	printk(KERN_INFO "%s: MAC Address: %pM\n", priv->name,
-		hw->wiphy->perm_addr);
+	printk(KERN_INFO "%s: 88w%u v%d, %pM, firmware version %u.%u.%u.%u\n",
+	       wiphy_name(hw->wiphy), priv->part_num, priv->hw_rev,
+	       hw->wiphy->perm_addr,
+	       (priv->fw_rev >> 24) & 0xff, (priv->fw_rev >> 16) & 0xff,
+	       (priv->fw_rev >> 8) & 0xff, priv->fw_rev & 0xff);
 
 	return 0;