Commit 2ab71a02 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by Ralf Baechle

MIPS: BCM47xx: Move SPROM driver to drivers/firmware/

Broadcom ARM home routers store SPROM content in NVRAM just like MIPS
ones. To share SPROM code we need to move it out of arch/mips/ to some
common place. We already have bcm47xx_nvram in firmware path and SPROM
should fit there as well.
This driver is responsible for parsing SoC configuration data into a
struct shared between ssb and bcma buses.
This was tested with BCM4706 & BCM5357C0 (BCM47XX) and BCM4708A0
(ARCH_BCM_5301X).
Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12210/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent b11d0227
......@@ -197,6 +197,7 @@ config BCM47XX
select GPIOLIB
select LEDS_GPIO_REGISTER
select BCM47XX_NVRAM
select BCM47XX_SPROM
help
Support for BCM47XX based boards
......
......@@ -3,5 +3,5 @@
# under Linux.
#
obj-y += irq.o prom.o serial.o setup.o time.o sprom.o
obj-y += irq.o prom.o serial.o setup.o time.o
obj-y += board.o buttons.o leds.o workarounds.o
......@@ -10,9 +10,6 @@
/* prom.c */
void __init bcm47xx_prom_highmem_init(void);
/* sprom.c */
void bcm47xx_sprom_register_fallbacks(void);
/* buttons.c */
int __init bcm47xx_buttons_register(void);
......
......@@ -28,6 +28,7 @@
#include "bcm47xx_private.h"
#include <linux/bcm47xx_sprom.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/ethtool.h>
......@@ -151,7 +152,6 @@ void __init plat_mem_setup(void)
pr_info("Using bcma bus\n");
#ifdef CONFIG_BCM47XX_BCMA
bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
bcm47xx_sprom_register_fallbacks();
bcm47xx_register_bcma();
bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
#ifdef CONFIG_HIGHMEM
......
......@@ -9,3 +9,14 @@ config BCM47XX_NVRAM
This driver provides an easy way to get value of requested parameter.
It simply reads content of NVRAM and parses it. It doesn't control any
hardware part itself.
config BCM47XX_SPROM
bool "Broadcom SPROM driver"
depends on BCM47XX_NVRAM
help
Broadcom devices store configuration data in SPROM. Accessing it is
specific to the bus host type, e.g. PCI(e) devices have it mapped in
a PCI BAR.
In case of SoC devices SPROM content is stored on a flash used by
bootloader firmware CFE. This driver provides method to ssb and bcma
drivers to read SPROM on SoC.
obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o
obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o
......@@ -26,9 +26,11 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <bcm47xx.h>
#include <linux/if_ether.h>
#include <linux/bcm47xx_nvram.h>
#include <linux/bcma/bcma.h>
#include <linux/etherdevice.h>
#include <linux/if_ether.h>
#include <linux/ssb/ssb.h>
static void create_key(const char *prefix, const char *postfix,
const char *name, char *buf, int len)
......@@ -599,7 +601,7 @@ void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
bcm47xx_sprom_fill_auto(sprom, prefix, fallback);
}
#if defined(CONFIG_BCM47XX_SSB)
#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM)
static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
{
char prefix[10];
......@@ -622,7 +624,7 @@ static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
}
#endif
#if defined(CONFIG_BCM47XX_BCMA)
#if IS_BUILTIN(CONFIG_BCMA)
/*
* Having many NVRAM entries for PCI devices led to repeating prefixes like
* pci/1/1/ all the time and wasting flash space. So at some point Broadcom
......@@ -706,19 +708,30 @@ static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
}
#endif
static unsigned int bcm47xx_sprom_registered;
/*
* On bcm47xx we need to register SPROM fallback handler very early, so we can't
* use anything like platform device / driver for this.
*/
void bcm47xx_sprom_register_fallbacks(void)
int bcm47xx_sprom_register_fallbacks(void)
{
#if defined(CONFIG_BCM47XX_SSB)
if (bcm47xx_sprom_registered)
return 0;
#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM)
if (ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb))
pr_warn("Failed to register ssb SPROM handler\n");
#endif
#if defined(CONFIG_BCM47XX_BCMA)
#if IS_BUILTIN(CONFIG_BCMA)
if (bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma))
pr_warn("Failed to register bcma SPROM handler\n");
#endif
bcm47xx_sprom_registered = 1;
return 0;
}
fs_initcall(bcm47xx_sprom_register_fallbacks);
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __BCM47XX_SPROM_H
#define __BCM47XX_SPROM_H
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/vmalloc.h>
#ifdef CONFIG_BCM47XX_SPROM
int bcm47xx_sprom_register_fallbacks(void);
#else
static inline int bcm47xx_sprom_register_fallbacks(void)
{
return -ENOTSUPP;
};
#endif
#endif /* __BCM47XX_SPROM_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment