smc9194: replace printk with netdev_ calls

Also snipes some whitespace errors.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/smsc/smc9194.c

@@ -55,7 +55,7 @@
  ----------------------------------------------------------------------------*/
 
 static const char version[] =
-	"smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)\n";
+	"smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)";
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -612,7 +612,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
 	packet_no = inb( ioaddr + PNR_ARR + 1 );
 	if ( packet_no & 0x80 ) {
 		/* or isn't there?  BAD CHIP! */
-		printk(KERN_DEBUG CARDNAME": Memory allocation failed.\n");
+		netdev_dbg(dev, CARDNAME": Memory allocation failed.\n");
 		dev_kfree_skb_any(skb);
 		lp->saved_skb = NULL;
 		netif_wake_queue(dev);
@@ -625,7 +625,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
 	/* point to the beginning of the packet */
 	outw( PTR_AUTOINC , ioaddr + POINTER );
 
-   	PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length ));
+	PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length));
 #if SMC_DEBUG > 2
 	print_packet( buf, length );
 #endif
@@ -865,7 +865,6 @@ static const struct net_device_ops smc_netdev_ops = {
 static int __init smc_probe(struct net_device *dev, int ioaddr)
 {
 	int i, memory, retval;
-	static unsigned version_printed;
 	unsigned int bank;
 
 	const char *version_string;
@@ -937,8 +936,7 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 	   It might be prudent to check a listing of MAC addresses
 	   against the hardware address, or do some other tests. */
 
-	if (version_printed++ == 0)
-		printk("%s", version);
+	pr_info_once("%s\n", version);
 
 	/* fill in some of the fields */
 	dev->base_addr = ioaddr;
@@ -1027,21 +1025,21 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
 
 	/* now, print out the card info, in a short format.. */
 
-	printk("%s: %s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ", dev->name,
-		version_string, revision_register & 0xF, ioaddr, dev->irq,
-		if_string, memory );
+	netdev_info(dev, "%s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ",
+		    version_string, revision_register & 0xF, ioaddr, dev->irq,
+		    if_string, memory);
 	/*
 	 . Print the Ethernet address
 	*/
-	printk("ADDR: %pM\n", dev->dev_addr);
+	netdev_info(dev, "ADDR: %pM\n", dev->dev_addr);
 
 	/* Grab the IRQ */
-      	retval = request_irq(dev->irq, smc_interrupt, 0, DRV_NAME, dev);
-      	if (retval) {
-		printk("%s: unable to get IRQ %d (irqval=%d).\n", DRV_NAME,
-			dev->irq, retval);
-  	  	goto err_out;
-      	}
+	retval = request_irq(dev->irq, smc_interrupt, 0, DRV_NAME, dev);
+	if (retval) {
+		netdev_warn(dev, "%s: unable to get IRQ %d (irqval=%d).\n",
+			    DRV_NAME, dev->irq, retval);
+		goto err_out;
+	}
 
 	dev->netdev_ops			= &smc_netdev_ops;
 	dev->watchdog_timeo		= HZ/20;
@@ -1061,30 +1059,32 @@ static void print_packet( byte * buf, int length )
 	int remainder;
 	int lines;
 
-	printk("Packet of length %d\n", length);
+	pr_dbg("Packet of length %d\n", length);
 	lines = length / 16;
 	remainder = length % 16;
 
 	for ( i = 0; i < lines ; i ++ ) {
 		int cur;
 
+		printk(KERN_DEBUG);
 		for ( cur = 0; cur < 8; cur ++ ) {
 			byte a, b;
 
 			a = *(buf ++ );
 			b = *(buf ++ );
-			printk("%02x%02x ", a, b );
+			pr_cont("%02x%02x ", a, b);
 		}
-		printk("\n");
+		pr_cont("\n");
 	}
+	printk(KERN_DEBUG);
 	for ( i = 0; i < remainder/2 ; i++ ) {
 		byte a, b;
 
 		a = *(buf ++ );
 		b = *(buf ++ );
-		printk("%02x%02x ", a, b );
+		pr_cont("%02x%02x ", a, b);
 	}
-	printk("\n");
+	pr_cont("\n");
 #endif
 }
 #endif
@@ -1151,9 +1151,8 @@ static void smc_timeout(struct net_device *dev)
 {
 	/* If we get here, some higher level has decided we are broken.
 	   There should really be a "kick me" function call instead. */
-	printk(KERN_WARNING CARDNAME": transmit timed out, %s?\n",
-		tx_done(dev) ? "IRQ conflict" :
-		"network cable problem");
+	netdev_warn(dev, CARDNAME": transmit timed out, %s?\n",
+		    tx_done(dev) ? "IRQ conflict" : "network cable problem");
 	/* "kick" the adaptor */
 	smc_reset( dev->base_addr );
 	smc_enable( dev->base_addr );
@@ -1323,8 +1322,7 @@ static void smc_tx( struct net_device * dev )
 	dev->stats.tx_errors++;
 	if ( tx_status & TS_LOSTCAR ) dev->stats.tx_carrier_errors++;
 	if ( tx_status & TS_LATCOL  ) {
-		printk(KERN_DEBUG CARDNAME
-			": Late collision occurred on last xmit.\n");
+		netdev_dbg(dev, CARDNAME": Late collision occurred on last xmit.\n");
 		dev->stats.tx_window_errors++;
 	}
 #if 0
@@ -1332,7 +1330,7 @@ static void smc_tx( struct net_device * dev )
 #endif
 
 	if ( tx_status & TS_SUCCESS ) {
-		printk(CARDNAME": Successful packet caused interrupt\n");
+		netdev_info(dev, CARDNAME": Successful packet caused interrupt\n");
 	}
 	/* re-enable transmit */
 	SMC_SELECT_BANK( 0 );