Commit 2ae1a237 authored by Vinod Koul's avatar Vinod Koul

dmaengine: k3dma: remove dma_slave_config direction usage

dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Tested-by: default avatarJohn Stultz <john.stultz@linaro.org>
Signed-off-by: default avatarVinod Koul <vkoul@kernel.org>
parent ad7756e7
......@@ -87,10 +87,10 @@ struct k3_dma_chan {
struct virt_dma_chan vc;
struct k3_dma_phy *phy;
struct list_head node;
enum dma_transfer_direction dir;
dma_addr_t dev_addr;
enum dma_status status;
bool cyclic;
struct dma_slave_config slave_config;
};
struct k3_dma_phy {
......@@ -118,6 +118,10 @@ struct k3_dma_dev {
#define to_k3_dma(dmadev) container_of(dmadev, struct k3_dma_dev, slave)
static int k3_dma_config_write(struct dma_chan *chan,
enum dma_transfer_direction dir,
struct dma_slave_config *cfg);
static struct k3_dma_chan *to_k3_chan(struct dma_chan *chan)
{
return container_of(chan, struct k3_dma_chan, vc.chan);
......@@ -536,6 +540,7 @@ static struct dma_async_tx_descriptor *k3_dma_prep_slave_sg(
if (!ds)
return NULL;
num = 0;
k3_dma_config_write(chan, dir, &c->slave_config);
for_each_sg(sgl, sg, sglen, i) {
addr = sg_dma_address(sg);
......@@ -596,6 +601,7 @@ k3_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr,
avail = buf_len;
total = avail;
num = 0;
k3_dma_config_write(chan, dir, &c->slave_config);
if (period_len < modulo)
modulo = period_len;
......@@ -636,18 +642,26 @@ static int k3_dma_config(struct dma_chan *chan,
struct dma_slave_config *cfg)
{
struct k3_dma_chan *c = to_k3_chan(chan);
memcpy(&c->slave_config, cfg, sizeof(*cfg));
return 0;
}
static int k3_dma_config_write(struct dma_chan *chan,
enum dma_transfer_direction dir,
struct dma_slave_config *cfg)
{
struct k3_dma_chan *c = to_k3_chan(chan);
u32 maxburst = 0, val = 0;
enum dma_slave_buswidth width = DMA_SLAVE_BUSWIDTH_UNDEFINED;
if (cfg == NULL)
return -EINVAL;
c->dir = cfg->direction;
if (c->dir == DMA_DEV_TO_MEM) {
if (dir == DMA_DEV_TO_MEM) {
c->ccfg = CX_CFG_DSTINCR;
c->dev_addr = cfg->src_addr;
maxburst = cfg->src_maxburst;
width = cfg->src_addr_width;
} else if (c->dir == DMA_MEM_TO_DEV) {
} else if (dir == DMA_MEM_TO_DEV) {
c->ccfg = CX_CFG_SRCINCR;
c->dev_addr = cfg->dst_addr;
maxburst = cfg->dst_maxburst;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment