Commit 2aeeb182 authored by Linus Walleij's avatar Linus Walleij

ARM: dts: add a devicetree for Wiliboard WBD-111

This devicetree is simply based on the board file in
arch/arm/mach-gemini/board-wbd111.c and contain the
equivalent platform data, mainly just moving the GPIOs
from the global numberspace to explicitly reference their
parent GPIO.

Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent d08bd6b3
......@@ -176,7 +176,8 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
dtb-$(CONFIG_ARCH_GEMINI) += \
gemini-nas4220b.dtb \
gemini-rut1xx.dtb \
gemini-sq201.dtb
gemini-sq201.dtb \
gemini-wbd111.dtb
dtb-$(CONFIG_ARCH_HI3xxx) += \
hi3620-hi4511.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += \
......
/*
* Device Tree file for Wiliboard WBD-111
*/
/dts-v1/;
#include "gemini.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Wiliboard WBD-111";
compatible = "wiliboard,wbd111", "cortina,gemini";
#address-cells = <1>;
#size-cells = <1>;
memory { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = &uart0;
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@5 {
debounce_interval = <50>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "reset";
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led@1 {
label = "wbd111:red:L3";
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@2 {
label = "wbd111:green:L4";
gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@3 {
label = "wbd111:red:L4";
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@5 {
label = "wbd111:green:L3";
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
};
soc {
flash@30000000 {
status = "okay";
/* 8MB of flash */
reg = <0x30000000 0x00800000>;
partition@0 {
label = "RedBoot";
reg = <0x00000000 0x00020000>;
read-only;
};
partition@20000 {
label = "kernel";
reg = <0x00020000 0x00100000>;
};
partition@120000 {
label = "rootfs";
reg = <0x00120000 0x006a0000>;
};
partition@7c0000 {
label = "VCTL";
reg = <0x007c0000 0x00010000>;
read-only;
};
partition@7d0000 {
label = "cfg";
reg = <0x007d0000 0x00010000>;
read-only;
};
partition@7e0000 {
label = "FIS";
reg = <0x007e0000 0x00010000>;
read-only;
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment