The ps2esdi driver was marked as BROKEN more than two years ago due to being

no longer working for some time.

A driver that had been marked as BROKEN for such a long time seems to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive this driver, the code is still present in
the older kernel releases.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Documentation/mca.txt

@@ -143,14 +143,7 @@ MCA Device Drivers
 
 Currently, there are a number of MCA-specific device drivers.
 
-1) PS/2 ESDI
-	drivers/block/ps2esdi.c
-	include/linux/ps2esdi.h
-   Uses major number 36, and should use /dev files /dev/eda, /dev/edb.
-   Supports two drives, but only one controller.  May use the
-   command-line args "ed=cyl,head,sec" and "tp720".
-
-2) PS/2 SCSI
+1) PS/2 SCSI
 	drivers/scsi/ibmmca.c
 	drivers/scsi/ibmmca.h
    The driver for the IBM SCSI subsystem.  Includes both integrated
@@ -159,25 +152,25 @@ Currently, there are a number of MCA-specific device drivers.
    machine with a front-panel display (i.e. model 95), you can use
    "ibmmcascsi=display" to enable a drive activity indicator.
 
-3) 3c523
+2) 3c523
 	drivers/net/3c523.c
 	drivers/net/3c523.h
    3Com 3c523 Etherlink/MC ethernet driver.
 
-4) SMC Ultra/MCA and IBM Adapter/A
+3) SMC Ultra/MCA and IBM Adapter/A
 	drivers/net/smc-mca.c
 	drivers/net/smc-mca.h
 	Driver for the MCA version of the SMC Ultra and various other
 	OEM'ed and work-alike cards (Elite, Adapter/A, etc).
 
-5) NE/2
+4) NE/2
 	driver/net/ne2.c
 	driver/net/ne2.h
 	The NE/2 is the MCA version of the NE2000.  This may not work
 	with clones that have a different adapter id than the original
 	NE/2.
 
-6) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and
+5) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and
    Reply Sound Blaster/SCSI (SCSI part)
 	Better support for these cards than the driver for ISA.
    Supports multiple cards with IRQ sharing.

drivers/block/Kconfig

@@ -44,16 +44,6 @@ config MAC_FLOPPY
 	  If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple)
 	  floppy controller, say Y here. Most commonly found in PowerMacs.
 
-config BLK_DEV_PS2
-	tristate "PS/2 ESDI hard disk support"
-	depends on MCA && MCA_LEGACY && BROKEN
-	help
-	  Say Y here if you have a PS/2 machine with a MCA bus and an ESDI
-	  hard disk.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ps2esdi.
-
 config AMIGA_Z2RAM
 	tristate "Amiga Zorro II ramdisk support"
 	depends on ZORRO

drivers/block/Makefile

@@ -13,7 +13,6 @@ obj-$(CONFIG_ATARI_FLOPPY)	+= ataflop.o
 obj-$(CONFIG_AMIGA_Z2RAM)	+= z2ram.o
 obj-$(CONFIG_BLK_DEV_RAM)	+= brd.o
 obj-$(CONFIG_BLK_DEV_LOOP)	+= loop.o
-obj-$(CONFIG_BLK_DEV_PS2)	+= ps2esdi.o
 obj-$(CONFIG_BLK_DEV_XD)	+= xd.o
 obj-$(CONFIG_BLK_CPQ_DA)	+= cpqarray.o
 obj-$(CONFIG_BLK_CPQ_CISS_DA)  += cciss.o

include/linux/Kbuild

@@ -127,7 +127,6 @@ header-y += pkt_sched.h
 header-y += posix_types.h
 header-y += ppdev.h
 header-y += prctl.h
-header-y += ps2esdi.h
 header-y += qnxtypes.h
 header-y += quotaio_v1.h
 header-y += quotaio_v2.h

include/linux/ps2esdi.h

-#ifndef _PS2ESDI_H_
-#define _PS2ESDI_H_
-
-#define NRML_ESDI_ID 0xddff
-#define INTG_ESDI_ID 0xdf9f
-
-#define PRIMARY_IO_BASE 0x3510
-#define ALT_IO_BASE 0x3518
-
-#define ESDI_CMD_INT (io_base+0)
-#define ESDI_STT_INT (io_base+0)
-#define ESDI_CONTROL (io_base+2)
-#define ESDI_STATUS  (io_base+2)
-#define ESDI_ATTN    (io_base+3)
-#define ESDI_INTRPT  (io_base+3)
-
-#define STATUS_ENABLED    0x01
-#define STATUS_ALTERNATE  0x02
-#define STATUS_BUSY       0x10
-#define STATUS_STAT_AVAIL 0x08
-#define STATUS_INTR       0x01
-#define STATUS_RESET_FAIL 0xea
-#define STATUS_CMD_INF	  0x04
-
-#define CTRL_SOFT_RESET   0xe4
-#define CTRL_HARD_RESET   0x80
-#define CTRL_EOI          0xe2
-#define CTRL_ENABLE_DMA   0x02
-#define CTRL_ENABLE_INTR  0x01
-#define CTRL_DISABLE_INTR  0x00
-
-#define ATT_EOI 0x02
-
-/* bits of word 0 of configuration status block. more info see p.38 of tech ref */
-#define CONFIG_IS 0x10 /* Invalid Secondary */
-#define CONFIG_ZD 0x08 /* Zero Defect */
-#define CONFIG_SF 0x04 /* Skewed Format */
-#define CONFIG_FR 0x02 /* Removable */
-#define CONFIG_RT 0x01 /* Retries */
-
-#define PORT_SYS_A   0x92
-#define PORT_DMA_FN  0x18
-#define PORT_DMA_EX  0x1a
-
-#define ON (unsigned char)0x40
-#define OFF (unsigned char)~ON
-#define LITE_ON outb(inb(PORT_SYS_A) | ON,PORT_SYS_A)
-#define LITE_OFF outb((inb(PORT_SYS_A) & OFF),PORT_SYS_A)
-
-#define FAIL 0
-#define SUCCES 1
-
-#define INT_CMD_COMPLETE 0x01
-#define INT_CMD_ECC      0x03
-#define INT_CMD_RETRY    0x05
-#define INT_CMD_FORMAT   0x06
-#define INT_CMD_ECC_RETRY 0x07
-#define INT_CMD_WARNING  0x08
-#define INT_CMD_ABORT    0x09
-#define INT_RESET        0x0A
-#define INT_TRANSFER_REQ 0x0B
-#define INT_CMD_FAILED   0x0C
-#define INT_DMA_ERR      0x0D
-#define INT_CMD_BLK_ERR  0x0E
-#define INT_ATTN_ERROR   0x0F
-
-#define DMA_MASK_CHAN 0x90
-#define DMA_UNMASK_CHAN 0xA0
-#define DMA_WRITE_ADDR 0x20
-#define DMA_WRITE_TC 0x40
-#define DMA_WRITE_MODE 0x70
-
-#define CMD_GET_DEV_CONFIG 0x09
-#define CMD_READ 0x4601
-#define CMD_WRITE 0x4602
-#define DMA_READ_16 0x4C
-#define DMA_WRITE_16 0x44
-
-
-#define MB 1024*1024
-#define SECT_SIZE 512   
-
-#define ERROR 1
-#define OK 0
-
-#define HDIO_GETGEO 0x0301
-
-#define FALSE 0
-#define TRUE !FALSE
-
-struct ps2esdi_geometry {
-	unsigned char heads;
-	unsigned char sectors;
-	unsigned short cylinders;
-	unsigned long start;
-};
-
-#endif /* _PS2ESDI_H_ */