Commit 2af5bbe3 authored by Sebastian Reichel's avatar Sebastian Reichel Committed by Heiko Stuebner

arm64: dts: rockchip: remove clock-frequency from rtc

'clock-frequency' is not part of the DT binding and not supported by the
Linux driver.
Signed-off-by: default avatarSebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-3-sebastian.reichel@collabora.comSigned-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 67a9aeef
......@@ -212,7 +212,6 @@ hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xin32k";
/* rtc_int is not connected */
};
......
......@@ -196,7 +196,6 @@ hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xin32k";
/* rtc_int is not connected */
};
......
......@@ -104,7 +104,6 @@ hym8563: rtc@51 {
interrupt-parent = <&gpio0>;
interrupts = <RK_PA5 IRQ_TYPE_EDGE_FALLING>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xin32k";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
......
......@@ -301,7 +301,6 @@ hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "hym8563";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
......
......@@ -500,7 +500,6 @@ hym8563: rtc@51 {
interrupt-parent = <&gpio0>;
interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "rtcic_32kout";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
......
......@@ -509,7 +509,6 @@ hym8563: rtc@51 {
interrupt-parent = <&gpio0>;
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "rtcic_32kout";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment