arm64: dts: exynos: Add stmfts touchscreen node for TM2 and TM2E

TM2 and TM2E devices are provided with a ST-Microelectronics
Finger Tip S device with small differences:

 - screen size
 - TM2E uses the stmfts also as a touchkey for "back" and "menu"

In this commit the initial value of the interrupt line is set to
EXYNOS_PIN_PULL_UP as the interrupt is triggered when the line
goes down.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi

@@ -756,6 +756,19 @@ buck10_reg: BUCK10 {
 	};
 };
 
+&hsi2c_5 {
+	status = "okay";
+
+	stmfts: touchscreen@49 {
+		compatible = "st,stmfts";
+		reg = <0x49>;
+		interrupt-parent = <&gpa1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&ldo30_reg>;
+		vdd-supply = <&ldo31_reg>;
+	};
+};
+
 &hsi2c_7 {
 	status = "okay";
 
@@ -901,7 +914,7 @@ initial_alive: initial-state {
 		PIN(INPUT, gpa0-7, NONE, FAST_SR1);
 
 		PIN(INPUT, gpa1-0, UP, FAST_SR1);
-		PIN(INPUT, gpa1-1, NONE, FAST_SR1);
+		PIN(INPUT, gpa1-1, UP, FAST_SR1);
 		PIN(INPUT, gpa1-2, NONE, FAST_SR1);
 		PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
 		PIN(INPUT, gpa1-4, DOWN, FAST_SR1);

arch/arm64/boot/dts/exynos/exynos5433-tm2.dts

@@ -76,3 +76,8 @@ &ldo38_reg {
 	regulator-min-microvolt = <3000000>;
 	regulator-max-microvolt = <3000000>;
 };
+
+&stmfts {
+	touchscreen-size-x = <1439>;
+	touchscreen-size-y = <2559>;
+};

arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts

@@ -63,3 +63,10 @@ &ldo38_reg {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
 };
+
+&stmfts {
+	touchscreen-size-x = <1599>;
+	touchscreen-size-y = <2559>;
+	touch-key-connected;
+	ledvdd-supply = <&ldo33_reg>;
+};