Commit 2b30842b authored by Andrew Lunn's avatar Andrew Lunn Committed by David S. Miller

net: fec: Clear and enable MIB counters on imx51

Both the IMX51 and IMX53 datasheet indicates that the MIB counters
should be cleared during setup. Otherwise random numbers are returned
via ethtool -S.  Add a quirk and a function to do this.

Tested on an IMX51.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 216fe8f0
...@@ -446,6 +446,10 @@ struct bufdesc_ex { ...@@ -446,6 +446,10 @@ struct bufdesc_ex {
#define FEC_QUIRK_HAS_COALESCE (1 << 13) #define FEC_QUIRK_HAS_COALESCE (1 << 13)
/* Interrupt doesn't wake CPU from deep idle */ /* Interrupt doesn't wake CPU from deep idle */
#define FEC_QUIRK_ERR006687 (1 << 14) #define FEC_QUIRK_ERR006687 (1 << 14)
/* The MIB counters should be cleared and enabled during
* initialisation.
*/
#define FEC_QUIRK_MIB_CLEAR (1 << 15)
struct bufdesc_prop { struct bufdesc_prop {
int qid; int qid;
......
...@@ -89,10 +89,10 @@ static struct platform_device_id fec_devtype[] = { ...@@ -89,10 +89,10 @@ static struct platform_device_id fec_devtype[] = {
.driver_data = 0, .driver_data = 0,
}, { }, {
.name = "imx25-fec", .name = "imx25-fec",
.driver_data = FEC_QUIRK_USE_GASKET, .driver_data = FEC_QUIRK_USE_GASKET | FEC_QUIRK_MIB_CLEAR,
}, { }, {
.name = "imx27-fec", .name = "imx27-fec",
.driver_data = 0, .driver_data = FEC_QUIRK_MIB_CLEAR,
}, { }, {
.name = "imx28-fec", .name = "imx28-fec",
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME | .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
...@@ -184,6 +184,9 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address"); ...@@ -184,6 +184,9 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
#define FEC_RACC_SHIFT16 BIT(7) #define FEC_RACC_SHIFT16 BIT(7)
#define FEC_RACC_OPTIONS (FEC_RACC_IPDIS | FEC_RACC_PRODIS) #define FEC_RACC_OPTIONS (FEC_RACC_IPDIS | FEC_RACC_PRODIS)
/* MIB Control Register */
#define FEC_MIB_CTRLSTAT_DISABLE BIT(31)
/* /*
* The 5270/5271/5280/5282/532x RX control register also contains maximum frame * The 5270/5271/5280/5282/532x RX control register also contains maximum frame
* size bits. Other FEC hardware does not, so we need to take that into * size bits. Other FEC hardware does not, so we need to take that into
...@@ -2356,6 +2359,21 @@ static int fec_enet_get_sset_count(struct net_device *dev, int sset) ...@@ -2356,6 +2359,21 @@ static int fec_enet_get_sset_count(struct net_device *dev, int sset)
} }
} }
static void fec_enet_clear_ethtool_stats(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
int i;
/* Disable MIB statistics counters */
writel(FEC_MIB_CTRLSTAT_DISABLE, fep->hwp + FEC_MIB_CTRLSTAT);
for (i = 0; i < ARRAY_SIZE(fec_stats); i++)
writel(0, fep->hwp + fec_stats[i].offset);
/* Don't disable MIB statistics counters */
writel(0, fep->hwp + FEC_MIB_CTRLSTAT);
}
#else /* !defined(CONFIG_M5272) */ #else /* !defined(CONFIG_M5272) */
#define FEC_STATS_SIZE 0 #define FEC_STATS_SIZE 0
static inline void fec_enet_update_ethtool_stats(struct net_device *dev) static inline void fec_enet_update_ethtool_stats(struct net_device *dev)
...@@ -3182,7 +3200,10 @@ static int fec_enet_init(struct net_device *ndev) ...@@ -3182,7 +3200,10 @@ static int fec_enet_init(struct net_device *ndev)
fec_restart(ndev); fec_restart(ndev);
fec_enet_update_ethtool_stats(ndev); if (fep->quirks & FEC_QUIRK_MIB_CLEAR)
fec_enet_clear_ethtool_stats(ndev);
else
fec_enet_update_ethtool_stats(ndev);
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment