Commit 2b3e38c4 authored by Guennadi Liakhovetski's avatar Guennadi Liakhovetski Committed by Rafael J. Wysocki

ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper

This also fixes the following modular mmc build failure:

arch/arm/mach-shmobile/built-in.o: In function `ag5evm_sdhi0_gpio_cd':
pfc-sh73a0.c:(.text+0x7c0): undefined reference to `mmc_detect_change'

on this platform by eliminating the use of an inline function, which
calls into the mmc core.
Signed-off-by: default avatarGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: default avatarSimon Horman <horms@verge.net.au>
Acked-by: default avatarMagnus Damm <damm@opensource.se>
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
parent d48b97b4
......@@ -1011,21 +1011,12 @@ static int slot_cn7_get_cd(struct platform_device *pdev)
}
/* SDHI0 */
static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg)
{
struct device *dev = arg;
struct sh_mobile_sdhi_info *info = dev->platform_data;
struct tmio_mmc_data *pdata = info->pdata;
tmio_mmc_cd_wakeup(pdata);
return IRQ_HANDLED;
}
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
.tmio_flags = TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
.cd_gpio = GPIO_PORT172,
};
static struct resource sdhi0_resources[] = {
......@@ -1384,7 +1375,6 @@ static void __init mackerel_init(void)
{
u32 srcr4;
struct clk *clk;
int ret;
/* External clock source */
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
......@@ -1481,7 +1471,6 @@ static void __init mackerel_init(void)
irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
/* enable SDHI0 */
gpio_request(GPIO_FN_SDHICD0, NULL);
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
......@@ -1490,13 +1479,6 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd,
IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev);
if (!ret)
sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
else
pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret);
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* enable SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment