ASoC: arizona: Support variable FLL VCO multipliers

Some Arizona chips have a higher frequency for the FLL VCO, support this
in the common code.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

sound/soc/codecs/arizona.c

@@ -734,9 +734,9 @@ static int arizona_calc_fll(struct arizona_fll *fll,
 	/* Apply the division for our remaining calculations */
 	Fref /= div;
 
-	/* Fvco should be 90-100MHz; don't check the upper bound */
+	/* Fvco should be over the targt; don't check the upper bound */
 	div = 1;
-	while (Fout * div < 90000000) {
+	while (Fout * div < 90000000 * fll->vco_mult) {
 		div++;
 		if (div > 7) {
 			arizona_fll_err(fll, "No FLL_OUTDIV for Fout=%uHz\n",
@@ -744,7 +744,7 @@ static int arizona_calc_fll(struct arizona_fll *fll,
 			return -EINVAL;
 		}
 	}
-	target = Fout * div;
+	target = Fout * div / fll->vco_mult;
 	cfg->outdiv = div;
 
 	arizona_fll_dbg(fll, "Fvco=%dHz\n", target);

sound/soc/codecs/arizona.h

@@ -141,6 +141,7 @@ struct arizona_fll {
 	struct arizona *arizona;
 	int id;
 	unsigned int base;
+	unsigned int vco_mult;
 	struct completion lock;
 	struct completion ok;
 

sound/soc/codecs/wm5102.c

@@ -853,6 +853,9 @@ static int __devinit wm5102_probe(struct platform_device *pdev)
 
 	wm5102->core.arizona = arizona;
 
+	for (i = 0; i < ARRAY_SIZE(wm5102->fll); i++)
+		wm5102->fll[i].vco_mult = 1;
+
 	arizona_init_fll(arizona, 1, ARIZONA_FLL1_CONTROL_1 - 1,
 			 ARIZONA_IRQ_FLL1_LOCK, ARIZONA_IRQ_FLL1_CLOCK_OK,
 			 &wm5102->fll[0]);