Commit 2b511edb authored by Sylwester Nawrocki's avatar Sylwester Nawrocki Committed by Mauro Carvalho Chehab

[media] s5p-fimc: Add FIMC-LITE register definitions

Add register definitions and register API for FIMC-LITE devices.
Signed-off-by: default avatarSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent c83a1ff0
/*
* Register interface file for EXYNOS FIMC-LITE (camera interface) driver
*
* Copyright (C) 2012 Samsung Electronics Co., Ltd.
* Sylwester Nawrocki <s.nawrocki@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/delay.h>
#include <media/s5p_fimc.h>
#include "fimc-lite-reg.h"
#include "fimc-lite.h"
#include "fimc-core.h"
#define FLITE_RESET_TIMEOUT 50 /* in ms */
void flite_hw_reset(struct fimc_lite *dev)
{
unsigned long end = jiffies + msecs_to_jiffies(FLITE_RESET_TIMEOUT);
u32 cfg;
cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
cfg |= FLITE_REG_CIGCTRL_SWRST_REQ;
writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
while (time_is_after_jiffies(end)) {
cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
if (cfg & FLITE_REG_CIGCTRL_SWRST_RDY)
break;
usleep_range(1000, 5000);
}
cfg |= FLITE_REG_CIGCTRL_SWRST;
writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
}
void flite_hw_clear_pending_irq(struct fimc_lite *dev)
{
u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS);
cfg &= ~FLITE_REG_CISTATUS_IRQ_CAM;
writel(cfg, dev->regs + FLITE_REG_CISTATUS);
}
u32 flite_hw_get_interrupt_source(struct fimc_lite *dev)
{
u32 intsrc = readl(dev->regs + FLITE_REG_CISTATUS);
return intsrc & FLITE_REG_CISTATUS_IRQ_MASK;
}
void flite_hw_clear_last_capture_end(struct fimc_lite *dev)
{
u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS2);
cfg &= ~FLITE_REG_CISTATUS2_LASTCAPEND;
writel(cfg, dev->regs + FLITE_REG_CISTATUS2);
}
void flite_hw_set_interrupt_mask(struct fimc_lite *dev)
{
u32 cfg, intsrc;
/* Select interrupts to be enabled for each output mode */
if (dev->out_path == FIMC_IO_DMA) {
intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN |
FLITE_REG_CIGCTRL_IRQ_LASTEN |
FLITE_REG_CIGCTRL_IRQ_STARTEN;
} else {
/* An output to the FIMC-IS */
intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN |
FLITE_REG_CIGCTRL_IRQ_LASTEN;
}
cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
cfg |= FLITE_REG_CIGCTRL_IRQ_DISABLE_MASK;
cfg &= ~intsrc;
writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
}
void flite_hw_capture_start(struct fimc_lite *dev)
{
u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT);
cfg |= FLITE_REG_CIIMGCPT_IMGCPTEN;
writel(cfg, dev->regs + FLITE_REG_CIIMGCPT);
}
void flite_hw_capture_stop(struct fimc_lite *dev)
{
u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT);
cfg &= ~FLITE_REG_CIIMGCPT_IMGCPTEN;
writel(cfg, dev->regs + FLITE_REG_CIIMGCPT);
}
/*
* Test pattern (color bars) enable/disable. External sensor
* pixel clock must be active for the test pattern to work.
*/
void flite_hw_set_test_pattern(struct fimc_lite *dev, bool on)
{
u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
if (on)
cfg |= FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR;
else
cfg &= ~FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR;
writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
}
static const u32 src_pixfmt_map[8][3] = {
{ V4L2_MBUS_FMT_YUYV8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCBYCR,
FLITE_REG_CIGCTRL_YUV422_1P },
{ V4L2_MBUS_FMT_YVYU8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCRYCB,
FLITE_REG_CIGCTRL_YUV422_1P },
{ V4L2_MBUS_FMT_UYVY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CBYCRY,
FLITE_REG_CIGCTRL_YUV422_1P },
{ V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CRYCBY,
FLITE_REG_CIGCTRL_YUV422_1P },
{ V4L2_PIX_FMT_SGRBG8, 0, FLITE_REG_CIGCTRL_RAW8 },
{ V4L2_PIX_FMT_SGRBG10, 0, FLITE_REG_CIGCTRL_RAW10 },
{ V4L2_PIX_FMT_SGRBG12, 0, FLITE_REG_CIGCTRL_RAW12 },
{ V4L2_MBUS_FMT_JPEG_1X8, 0, FLITE_REG_CIGCTRL_USER(1) },
};
/* Set camera input pixel format and resolution */
void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f)
{
enum v4l2_mbus_pixelcode pixelcode = dev->fmt->mbus_code;
unsigned int i = ARRAY_SIZE(src_pixfmt_map);
u32 cfg;
while (i-- >= 0) {
if (src_pixfmt_map[i][0] == pixelcode)
break;
}
if (i == 0 && src_pixfmt_map[i][0] != pixelcode) {
v4l2_err(dev->vfd,
"Unsupported pixel code, falling back to %#08x\n",
src_pixfmt_map[i][0]);
}
cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
cfg &= ~FLITE_REG_CIGCTRL_FMT_MASK;
cfg |= src_pixfmt_map[i][2];
writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
cfg = readl(dev->regs + FLITE_REG_CISRCSIZE);
cfg &= ~(FLITE_REG_CISRCSIZE_ORDER422_MASK |
FLITE_REG_CISRCSIZE_SIZE_CAM_MASK);
cfg |= (f->f_width << 16) | f->f_height;
cfg |= src_pixfmt_map[i][1];
writel(cfg, dev->regs + FLITE_REG_CISRCSIZE);
}
/* Set the camera host input window offsets (cropping) */
void flite_hw_set_window_offset(struct fimc_lite *dev, struct flite_frame *f)
{
u32 hoff2, voff2;
u32 cfg;
cfg = readl(dev->regs + FLITE_REG_CIWDOFST);
cfg &= ~FLITE_REG_CIWDOFST_OFST_MASK;
cfg |= (f->rect.left << 16) | f->rect.top;
cfg |= FLITE_REG_CIWDOFST_WINOFSEN;
writel(cfg, dev->regs + FLITE_REG_CIWDOFST);
hoff2 = f->f_width - f->rect.width - f->rect.left;
voff2 = f->f_height - f->rect.height - f->rect.top;
cfg = (hoff2 << 16) | voff2;
writel(cfg, dev->regs + FLITE_REG_CIWDOFST2);
}
/* Select camera port (A, B) */
static void flite_hw_set_camera_port(struct fimc_lite *dev, int id)
{
u32 cfg = readl(dev->regs + FLITE_REG_CIGENERAL);
if (id == 0)
cfg &= ~FLITE_REG_CIGENERAL_CAM_B;
else
cfg |= FLITE_REG_CIGENERAL_CAM_B;
writel(cfg, dev->regs + FLITE_REG_CIGENERAL);
}
/* Select serial or parallel bus, camera port (A,B) and set signals polarity */
void flite_hw_set_camera_bus(struct fimc_lite *dev,
struct s5p_fimc_isp_info *s_info)
{
u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
unsigned int flags = s_info->flags;
if (s_info->bus_type != FIMC_MIPI_CSI2) {
cfg &= ~(FLITE_REG_CIGCTRL_SELCAM_MIPI |
FLITE_REG_CIGCTRL_INVPOLPCLK |
FLITE_REG_CIGCTRL_INVPOLVSYNC |
FLITE_REG_CIGCTRL_INVPOLHREF);
if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
cfg |= FLITE_REG_CIGCTRL_INVPOLPCLK;
if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
cfg |= FLITE_REG_CIGCTRL_INVPOLVSYNC;
if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
cfg |= FLITE_REG_CIGCTRL_INVPOLHREF;
} else {
cfg |= FLITE_REG_CIGCTRL_SELCAM_MIPI;
}
writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
flite_hw_set_camera_port(dev, s_info->mux_id);
}
void flite_hw_set_out_order(struct fimc_lite *dev, struct flite_frame *f)
{
static const u32 pixcode[4][2] = {
{ V4L2_MBUS_FMT_YUYV8_2X8, FLITE_REG_CIODMAFMT_YCBYCR },
{ V4L2_MBUS_FMT_YVYU8_2X8, FLITE_REG_CIODMAFMT_YCRYCB },
{ V4L2_MBUS_FMT_UYVY8_2X8, FLITE_REG_CIODMAFMT_CBYCRY },
{ V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CIODMAFMT_CRYCBY },
};
u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT);
unsigned int i = ARRAY_SIZE(pixcode);
while (i-- >= 0)
if (pixcode[i][0] == dev->fmt->mbus_code)
break;
cfg &= ~FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK;
writel(cfg | pixcode[i][1], dev->regs + FLITE_REG_CIODMAFMT);
}
void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f)
{
u32 cfg;
/* Maximum output pixel size */
cfg = readl(dev->regs + FLITE_REG_CIOCAN);
cfg &= ~FLITE_REG_CIOCAN_MASK;
cfg = (f->f_height << 16) | f->f_width;
writel(cfg, dev->regs + FLITE_REG_CIOCAN);
/* DMA offsets */
cfg = readl(dev->regs + FLITE_REG_CIOOFF);
cfg &= ~FLITE_REG_CIOOFF_MASK;
cfg |= (f->rect.top << 16) | f->rect.left;
writel(cfg, dev->regs + FLITE_REG_CIOOFF);
}
/* Enable/disable output DMA, set output pixel size and offsets (composition) */
void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f,
bool enable)
{
u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL);
if (!enable) {
cfg |= FLITE_REG_CIGCTRL_ODMA_DISABLE;
writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
return;
}
cfg &= ~FLITE_REG_CIGCTRL_ODMA_DISABLE;
writel(cfg, dev->regs + FLITE_REG_CIGCTRL);
flite_hw_set_out_order(dev, f);
flite_hw_set_dma_window(dev, f);
}
void flite_hw_dump_regs(struct fimc_lite *dev, const char *label)
{
struct {
u32 offset;
const char * const name;
} registers[] = {
{ 0x00, "CISRCSIZE" },
{ 0x04, "CIGCTRL" },
{ 0x08, "CIIMGCPT" },
{ 0x0c, "CICPTSEQ" },
{ 0x10, "CIWDOFST" },
{ 0x14, "CIWDOFST2" },
{ 0x18, "CIODMAFMT" },
{ 0x20, "CIOCAN" },
{ 0x24, "CIOOFF" },
{ 0x30, "CIOSA" },
{ 0x40, "CISTATUS" },
{ 0x44, "CISTATUS2" },
{ 0xf0, "CITHOLD" },
{ 0xfc, "CIGENERAL" },
};
u32 i;
pr_info("--- %s ---\n", label);
for (i = 0; i < ARRAY_SIZE(registers); i++) {
u32 cfg = readl(dev->regs + registers[i].offset);
pr_info("%s: %s:\t0x%08x\n", __func__, registers[i].name, cfg);
}
}
/*
* Copyright (C) 2012 Samsung Electronics Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef FIMC_LITE_REG_H_
#define FIMC_LITE_REG_H_
#include "fimc-lite.h"
/* Camera Source size */
#define FLITE_REG_CISRCSIZE 0x00
#define FLITE_REG_CISRCSIZE_ORDER422_IN_YCBYCR (0 << 14)
#define FLITE_REG_CISRCSIZE_ORDER422_IN_YCRYCB (1 << 14)
#define FLITE_REG_CISRCSIZE_ORDER422_IN_CBYCRY (2 << 14)
#define FLITE_REG_CISRCSIZE_ORDER422_IN_CRYCBY (3 << 14)
#define FLITE_REG_CISRCSIZE_ORDER422_MASK (0x3 << 14)
#define FLITE_REG_CISRCSIZE_SIZE_CAM_MASK (0x3fff << 16 | 0x3fff)
/* Global control */
#define FLITE_REG_CIGCTRL 0x04
#define FLITE_REG_CIGCTRL_YUV422_1P (0x1e << 24)
#define FLITE_REG_CIGCTRL_RAW8 (0x2a << 24)
#define FLITE_REG_CIGCTRL_RAW10 (0x2b << 24)
#define FLITE_REG_CIGCTRL_RAW12 (0x2c << 24)
#define FLITE_REG_CIGCTRL_RAW14 (0x2d << 24)
/* User defined formats. x = 0...15 */
#define FLITE_REG_CIGCTRL_USER(x) ((0x30 + x - 1) << 24)
#define FLITE_REG_CIGCTRL_FMT_MASK (0x3f << 24)
#define FLITE_REG_CIGCTRL_SHADOWMASK_DISABLE (1 << 21)
#define FLITE_REG_CIGCTRL_ODMA_DISABLE (1 << 20)
#define FLITE_REG_CIGCTRL_SWRST_REQ (1 << 19)
#define FLITE_REG_CIGCTRL_SWRST_RDY (1 << 18)
#define FLITE_REG_CIGCTRL_SWRST (1 << 17)
#define FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR (1 << 15)
#define FLITE_REG_CIGCTRL_INVPOLPCLK (1 << 14)
#define FLITE_REG_CIGCTRL_INVPOLVSYNC (1 << 13)
#define FLITE_REG_CIGCTRL_INVPOLHREF (1 << 12)
/* Interrupts mask bits (1 disables an interrupt) */
#define FLITE_REG_CIGCTRL_IRQ_LASTEN (1 << 8)
#define FLITE_REG_CIGCTRL_IRQ_ENDEN (1 << 7)
#define FLITE_REG_CIGCTRL_IRQ_STARTEN (1 << 6)
#define FLITE_REG_CIGCTRL_IRQ_OVFEN (1 << 5)
#define FLITE_REG_CIGCTRL_IRQ_DISABLE_MASK (0xf << 5)
#define FLITE_REG_CIGCTRL_SELCAM_MIPI (1 << 3)
/* Image Capture Enable */
#define FLITE_REG_CIIMGCPT 0x08
#define FLITE_REG_CIIMGCPT_IMGCPTEN (1 << 31)
#define FLITE_REG_CIIMGCPT_CPT_FREN (1 << 25)
#define FLITE_REG_CIIMGCPT_CPT_MOD_FRCNT (1 << 18)
#define FLITE_REG_CIIMGCPT_CPT_MOD_FREN (0 << 18)
/* Capture Sequence */
#define FLITE_REG_CICPTSEQ 0x0c
/* Camera Window Offset */
#define FLITE_REG_CIWDOFST 0x10
#define FLITE_REG_CIWDOFST_WINOFSEN (1 << 31)
#define FLITE_REG_CIWDOFST_CLROVIY (1 << 31)
#define FLITE_REG_CIWDOFST_CLROVFICB (1 << 15)
#define FLITE_REG_CIWDOFST_CLROVFICR (1 << 14)
#define FLITE_REG_CIWDOFST_OFST_MASK ((0x1fff << 16) | 0x1fff)
/* Camera Window Offset2 */
#define FLITE_REG_CIWDOFST2 0x14
/* Camera Output DMA Format */
#define FLITE_REG_CIODMAFMT 0x18
#define FLITE_REG_CIODMAFMT_RAW_CON (1 << 15)
#define FLITE_REG_CIODMAFMT_PACK12 (1 << 14)
#define FLITE_REG_CIODMAFMT_CRYCBY (0 << 4)
#define FLITE_REG_CIODMAFMT_CBYCRY (1 << 4)
#define FLITE_REG_CIODMAFMT_YCRYCB (2 << 4)
#define FLITE_REG_CIODMAFMT_YCBYCR (3 << 4)
#define FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK (0x3 << 4)
/* Camera Output Canvas */
#define FLITE_REG_CIOCAN 0x20
#define FLITE_REG_CIOCAN_MASK ((0x3fff << 16) | 0x3fff)
/* Camera Output DMA Offset */
#define FLITE_REG_CIOOFF 0x24
#define FLITE_REG_CIOOFF_MASK ((0x3fff << 16) | 0x3fff)
/* Camera Output DMA Start Address */
#define FLITE_REG_CIOSA 0x30
/* Camera Status */
#define FLITE_REG_CISTATUS 0x40
#define FLITE_REG_CISTATUS_MIPI_VVALID (1 << 22)
#define FLITE_REG_CISTATUS_MIPI_HVALID (1 << 21)
#define FLITE_REG_CISTATUS_MIPI_DVALID (1 << 20)
#define FLITE_REG_CISTATUS_ITU_VSYNC (1 << 14)
#define FLITE_REG_CISTATUS_ITU_HREFF (1 << 13)
#define FLITE_REG_CISTATUS_OVFIY (1 << 10)
#define FLITE_REG_CISTATUS_OVFICB (1 << 9)
#define FLITE_REG_CISTATUS_OVFICR (1 << 8)
#define FLITE_REG_CISTATUS_IRQ_SRC_OVERFLOW (1 << 7)
#define FLITE_REG_CISTATUS_IRQ_SRC_LASTCAPEND (1 << 6)
#define FLITE_REG_CISTATUS_IRQ_SRC_FRMSTART (1 << 5)
#define FLITE_REG_CISTATUS_IRQ_SRC_FRMEND (1 << 4)
#define FLITE_REG_CISTATUS_IRQ_CAM (1 << 0)
#define FLITE_REG_CISTATUS_IRQ_MASK (0xf << 4)
/* Camera Status2 */
#define FLITE_REG_CISTATUS2 0x44
#define FLITE_REG_CISTATUS2_LASTCAPEND (1 << 1)
#define FLITE_REG_CISTATUS2_FRMEND (1 << 0)
/* Qos Threshold */
#define FLITE_REG_CITHOLD 0xf0
#define FLITE_REG_CITHOLD_W_QOS_EN (1 << 30)
/* Camera General Purpose */
#define FLITE_REG_CIGENERAL 0xfc
/* b0: 1 - camera B, 0 - camera A */
#define FLITE_REG_CIGENERAL_CAM_B (1 << 0)
/* ----------------------------------------------------------------------------
* Function declarations
*/
void flite_hw_reset(struct fimc_lite *dev);
void flite_hw_clear_pending_irq(struct fimc_lite *dev);
u32 flite_hw_get_interrupt_source(struct fimc_lite *dev);
void flite_hw_clear_last_capture_end(struct fimc_lite *dev);
void flite_hw_set_interrupt_mask(struct fimc_lite *dev);
void flite_hw_capture_start(struct fimc_lite *dev);
void flite_hw_capture_stop(struct fimc_lite *dev);
void flite_hw_set_camera_bus(struct fimc_lite *dev,
struct s5p_fimc_isp_info *s_info);
void flite_hw_set_camera_polarity(struct fimc_lite *dev,
struct s5p_fimc_isp_info *cam);
void flite_hw_set_window_offset(struct fimc_lite *dev, struct flite_frame *f);
void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f);
void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f,
bool enable);
void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f);
void flite_hw_set_test_pattern(struct fimc_lite *dev, bool on);
void flite_hw_dump_regs(struct fimc_lite *dev, const char *label);
static inline void flite_hw_set_output_addr(struct fimc_lite *dev, u32 paddr)
{
writel(paddr, dev->regs + FLITE_REG_CIOSA);
}
#endif /* FIMC_LITE_REG_H */
/*
* Copyright (C) 2012 Samsung Electronics Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef FIMC_LITE_H_
#define FIMC_LITE_H_
#include <asm/sizes.h>
#include <linux/io.h>
#include <linux/irqreturn.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/videodev2.h>
#include <media/media-entity.h>
#include <media/videobuf2-core.h>
#include <media/v4l2-device.h>
#include <media/v4l2-mediabus.h>
#include <media/s5p_fimc.h>
#include "fimc-core.h"
#define FIMC_LITE_DRV_NAME "exynos-fimc-lite"
#define FLITE_CLK_NAME "flite"
#define FIMC_LITE_MAX_DEVS 2
#define FLITE_REQ_BUFS_MIN 2
/* Bit index definitions for struct fimc_lite::state */
enum {
ST_FLITE_LPM,
ST_FLITE_PENDING,
ST_FLITE_RUN,
ST_FLITE_STREAM,
ST_FLITE_SUSPENDED,
ST_FLITE_OFF,
ST_FLITE_IN_USE,
ST_FLITE_CONFIG,
ST_SENSOR_STREAM,
};
#define FLITE_SD_PAD_SINK 0
#define FLITE_SD_PAD_SOURCE 1
#define FLITE_SD_PADS_NUM 2
struct flite_variant {
unsigned short max_width;
unsigned short max_height;
unsigned short out_width_align;
unsigned short win_hor_offs_align;
unsigned short out_hor_offs_align;
};
struct flite_drvdata {
struct flite_variant *variant[FIMC_LITE_MAX_DEVS];
};
#define fimc_lite_get_drvdata(_pdev) \
((struct flite_drvdata *) platform_get_device_id(_pdev)->driver_data)
struct fimc_lite_events {
unsigned int data_overflow;
};
#define FLITE_MAX_PLANES 1
/**
* struct flite_frame - source/target frame properties
* @f_width: full pixel width
* @f_height: full pixel height
* @rect: crop/composition rectangle
*/
struct flite_frame {
u16 f_width;
u16 f_height;
struct v4l2_rect rect;
};
/**
* struct flite_buffer - video buffer structure
* @vb: vb2 buffer
* @list: list head for the buffers queue
* @paddr: precalculated physical address
*/
struct flite_buffer {
struct vb2_buffer vb;
struct list_head list;
dma_addr_t paddr;
};
/**
* struct fimc_lite - fimc lite structure
* @pdev: pointer to FIMC-LITE platform device
* @variant: variant information for this IP
* @v4l2_dev: pointer to top the level v4l2_device
* @vfd: video device node
* @fh: v4l2 file handle
* @alloc_ctx: videobuf2 memory allocator context
* @subdev: FIMC-LITE subdev
* @vd_pad: media (sink) pad for the capture video node
* @subdev_pads: the subdev media pads
* @ctrl_handler: v4l2 control handler
* @test_pattern: test pattern controls
* @index: FIMC-LITE platform device index
* @pipeline: video capture pipeline data structure
* @slock: spinlock protecting this data structure and the hw registers
* @lock: mutex serializing video device and the subdev operations
* @clock: FIMC-LITE gate clock
* @regs: memory mapped io registers
* @irq_queue: interrupt handler waitqueue
* @fmt: pointer to color format description structure
* @payload: image size in bytes (w x h x bpp)
* @inp_frame: camera input frame structure
* @out_frame: DMA output frame structure
* @out_path: output data path (DMA or FIFO)
* @source_subdev_grp_id: source subdev group id
* @state: driver state flags
* @pending_buf_q: pending buffers queue head
* @active_buf_q: the queue head of buffers scheduled in hardware
* @vb_queue: vb2 buffers queue
* @active_buf_count: number of video buffers scheduled in hardware
* @frame_count: the captured frames counter
* @reqbufs_count: the number of buffers requested with REQBUFS ioctl
* @ref_count: driver's private reference counter
*/
struct fimc_lite {
struct platform_device *pdev;
struct flite_variant *variant;
struct v4l2_device *v4l2_dev;
struct video_device *vfd;
struct v4l2_fh fh;
struct vb2_alloc_ctx *alloc_ctx;
struct v4l2_subdev subdev;
struct media_pad vd_pad;
struct media_pad subdev_pads[FLITE_SD_PADS_NUM];
struct v4l2_ctrl_handler ctrl_handler;
struct v4l2_ctrl *test_pattern;
u32 index;
struct fimc_pipeline pipeline;
struct mutex lock;
spinlock_t slock;
struct clk *clock;
void __iomem *regs;
wait_queue_head_t irq_queue;
const struct fimc_fmt *fmt;
unsigned long payload[FLITE_MAX_PLANES];
struct flite_frame inp_frame;
struct flite_frame out_frame;
enum fimc_datapath out_path;
unsigned int source_subdev_grp_id;
unsigned long state;
struct list_head pending_buf_q;
struct list_head active_buf_q;
struct vb2_queue vb_queue;
unsigned int frame_count;
unsigned int reqbufs_count;
int ref_count;
struct fimc_lite_events events;
};
static inline bool fimc_lite_active(struct fimc_lite *fimc)
{
unsigned long flags;
bool ret;
spin_lock_irqsave(&fimc->slock, flags);
ret = fimc->state & (1 << ST_FLITE_RUN) ||
fimc->state & (1 << ST_FLITE_PENDING);
spin_unlock_irqrestore(&fimc->slock, flags);
return ret;
}
static inline void fimc_lite_active_queue_add(struct fimc_lite *dev,
struct flite_buffer *buf)
{
list_add_tail(&buf->list, &dev->active_buf_q);
}
static inline struct flite_buffer *fimc_lite_active_queue_pop(
struct fimc_lite *dev)
{
struct flite_buffer *buf = list_entry(dev->active_buf_q.next,
struct flite_buffer, list);
list_del(&buf->list);
return buf;
}
static inline void fimc_lite_pending_queue_add(struct fimc_lite *dev,
struct flite_buffer *buf)
{
list_add_tail(&buf->list, &dev->pending_buf_q);
}
static inline struct flite_buffer *fimc_lite_pending_queue_pop(
struct fimc_lite *dev)
{
struct flite_buffer *buf = list_entry(dev->pending_buf_q.next,
struct flite_buffer, list);
list_del(&buf->list);
return buf;
}
#endif /* FIMC_LITE_H_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment