Commit 2b545cd8 authored by Jeremy Kerr's avatar Jeremy Kerr Committed by Greg Kroah-Hartman

drivers/fsi: Implement slave initialisation

Implement fsi_slave_init: if we can read a chip ID, create fsi_slave
devices and register with the driver core.

Includes changes from Christopher Bostic <cbostic@linux.vnet.ibm.com>.
Signed-off-by: default avatarJeremy Kerr <jk@ozlabs.org>
Signed-off-by: default avatarChristopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 26095282
...@@ -6,6 +6,7 @@ menu "FSI support" ...@@ -6,6 +6,7 @@ menu "FSI support"
config FSI config FSI
tristate "FSI support" tristate "FSI support"
select CRC4
---help--- ---help---
FSI - the FRU Support Interface - is a simple bus for low-level FSI - the FRU Support Interface - is a simple bus for low-level
access to POWER-based hardware. access to POWER-based hardware.
......
...@@ -13,13 +13,17 @@ ...@@ -13,13 +13,17 @@
* GNU General Public License for more details. * GNU General Public License for more details.
*/ */
#include <linux/crc4.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/fsi.h> #include <linux/fsi.h>
#include <linux/idr.h> #include <linux/idr.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/slab.h>
#include "fsi-master.h" #include "fsi-master.h"
#define FSI_SLAVE_SIZE_23b 0x800000
static DEFINE_IDA(master_ida); static DEFINE_IDA(master_ida);
struct fsi_slave { struct fsi_slave {
...@@ -90,11 +94,70 @@ static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr, ...@@ -90,11 +94,70 @@ static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
addr, val, size); addr, val, size);
} }
static void fsi_slave_release(struct device *dev)
{
struct fsi_slave *slave = to_fsi_slave(dev);
kfree(slave);
}
static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id) static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
{ {
/* todo: initialise slave device, perform engine scan */ struct fsi_slave *slave;
uint32_t chip_id;
uint8_t crc;
int rc;
/* Currently, we only support single slaves on a link, and use the
* full 23-bit address range
*/
if (id != 0)
return -EINVAL;
rc = fsi_master_read(master, link, id, 0, &chip_id, sizeof(chip_id));
if (rc) {
dev_dbg(&master->dev, "can't read slave %02x:%02x %d\n",
link, id, rc);
return -ENODEV;
}
chip_id = be32_to_cpu(chip_id);
crc = crc4(0, chip_id, 32);
if (crc) {
dev_warn(&master->dev, "slave %02x:%02x invalid chip id CRC!\n",
link, id);
return -EIO;
}
dev_info(&master->dev, "fsi: found chip %08x at %02x:%02x:%02x\n",
chip_id, master->idx, link, id);
/* We can communicate with a slave; create the slave device and
* register.
*/
slave = kzalloc(sizeof(*slave), GFP_KERNEL);
if (!slave)
return -ENOMEM;
slave->master = master;
slave->dev.parent = &master->dev;
slave->dev.release = fsi_slave_release;
slave->link = link;
slave->id = id;
slave->size = FSI_SLAVE_SIZE_23b;
dev_set_name(&slave->dev, "slave@%02x:%02x", link, id);
rc = device_register(&slave->dev);
if (rc < 0) {
dev_warn(&master->dev, "failed to create slave device: %d\n",
rc);
put_device(&slave->dev);
return rc;
}
/* todo: perform engine scan */
return -ENODEV; return rc;
} }
/* FSI master support */ /* FSI master support */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment