i40e: Remove HMC AQ API implementation

Remove the code that implements the HMC AQ APIs and call these APIs.
This is done because these are obsolete APIs and are not supported
by firmware.

Change-ID: I5d771d8f37c3e16e7b0a972ff9b27e75aa2d05d4
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40e/i40e_adminq.c

@@ -617,10 +617,6 @@ i40e_status i40e_init_adminq(struct i40e_hw *hw)
 	hw->nvm_release_on_done = false;
 	hw->nvmupd_state = I40E_NVMUPD_STATE_INIT;
 
-	ret_code = i40e_aq_set_hmc_resource_profile(hw,
-						    I40E_HMC_PROFILE_DEFAULT,
-						    0,
-						    NULL);
 	ret_code = 0;
 
 	/* success! */

drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h

@@ -205,10 +205,6 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_resume_port_tx				= 0x041C,
 	i40e_aqc_opc_configure_partition_bw			= 0x041D,
 
-	/* hmc */
-	i40e_aqc_opc_query_hmc_resource_profile	= 0x0500,
-	i40e_aqc_opc_set_hmc_resource_profile	= 0x0501,
-
 	/* phy commands*/
 	i40e_aqc_opc_get_phy_abilities		= 0x0600,
 	i40e_aqc_opc_set_phy_config		= 0x0601,
@@ -1586,27 +1582,6 @@ struct i40e_aqc_configure_partition_bw_data {
 
 I40E_CHECK_STRUCT_LEN(0x22, i40e_aqc_configure_partition_bw_data);
 
-/* Get and set the active HMC resource profile and status.
- * (direct 0x0500) and (direct 0x0501)
- */
-struct i40e_aq_get_set_hmc_resource_profile {
-	u8	pm_profile;
-	u8	pe_vf_enabled;
-	u8	reserved[14];
-};
-
-I40E_CHECK_CMD_LENGTH(i40e_aq_get_set_hmc_resource_profile);
-
-enum i40e_aq_hmc_profile {
-	/* I40E_HMC_PROFILE_NO_CHANGE    = 0, reserved */
-	I40E_HMC_PROFILE_DEFAULT	= 1,
-	I40E_HMC_PROFILE_FAVOR_VF	= 2,
-	I40E_HMC_PROFILE_EQUAL		= 3,
-};
-
-#define I40E_AQ_GET_HMC_RESOURCE_PROFILE_PM_MASK	0xF
-#define I40E_AQ_GET_HMC_RESOURCE_PROFILE_COUNT_MASK	0x3F
-
 /* Get PHY Abilities (indirect 0x0600) uses the generic indirect struct */
 
 /* set in param0 for get phy abilities to report qualified modules */

drivers/net/ethernet/intel/i40e/i40e_common.c

@@ -2854,36 +2854,6 @@ i40e_status i40e_aq_debug_write_register(struct i40e_hw *hw,
 	return status;
 }
 
-/**
- * i40e_aq_set_hmc_resource_profile
- * @hw: pointer to the hw struct
- * @profile: type of profile the HMC is to be set as
- * @pe_vf_enabled_count: the number of PE enabled VFs the system has
- * @cmd_details: pointer to command details structure or NULL
- *
- * set the HMC profile of the device.
- **/
-i40e_status i40e_aq_set_hmc_resource_profile(struct i40e_hw *hw,
-				enum i40e_aq_hmc_profile profile,
-				u8 pe_vf_enabled_count,
-				struct i40e_asq_cmd_details *cmd_details)
-{
-	struct i40e_aq_desc desc;
-	struct i40e_aq_get_set_hmc_resource_profile *cmd =
-		(struct i40e_aq_get_set_hmc_resource_profile *)&desc.params.raw;
-	i40e_status status;
-
-	i40e_fill_default_direct_cmd_desc(&desc,
-					i40e_aqc_opc_set_hmc_resource_profile);
-
-	cmd->pm_profile = (u8)profile;
-	cmd->pe_vf_enabled = pe_vf_enabled_count;
-
-	status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
-
-	return status;
-}
-
 /**
  * i40e_aq_request_resource
  * @hw: pointer to the hw struct

drivers/net/ethernet/intel/i40e/i40e_prototype.h

@@ -236,10 +236,6 @@ i40e_status i40e_aq_config_vsi_bw_limit(struct i40e_hw *hw,
 				struct i40e_asq_cmd_details *cmd_details);
 i40e_status i40e_aq_dcb_updated(struct i40e_hw *hw,
 				struct i40e_asq_cmd_details *cmd_details);
-i40e_status i40e_aq_set_hmc_resource_profile(struct i40e_hw *hw,
-				enum i40e_aq_hmc_profile profile,
-				u8 pe_vf_enabled_count,
-				struct i40e_asq_cmd_details *cmd_details);
 i40e_status i40e_aq_config_switch_comp_bw_limit(struct i40e_hw *hw,
 				u16 seid, u16 credit, u8 max_bw,
 				struct i40e_asq_cmd_details *cmd_details);

drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h

@@ -205,10 +205,6 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_resume_port_tx				= 0x041C,
 	i40e_aqc_opc_configure_partition_bw			= 0x041D,
 
-	/* hmc */
-	i40e_aqc_opc_query_hmc_resource_profile	= 0x0500,
-	i40e_aqc_opc_set_hmc_resource_profile	= 0x0501,
-
 	/* phy commands*/
 	i40e_aqc_opc_get_phy_abilities		= 0x0600,
 	i40e_aqc_opc_set_phy_config		= 0x0601,
@@ -1583,27 +1579,6 @@ struct i40e_aqc_configure_partition_bw_data {
 
 I40E_CHECK_STRUCT_LEN(0x22, i40e_aqc_configure_partition_bw_data);
 
-/* Get and set the active HMC resource profile and status.
- * (direct 0x0500) and (direct 0x0501)
- */
-struct i40e_aq_get_set_hmc_resource_profile {
-	u8	pm_profile;
-	u8	pe_vf_enabled;
-	u8	reserved[14];
-};
-
-I40E_CHECK_CMD_LENGTH(i40e_aq_get_set_hmc_resource_profile);
-
-enum i40e_aq_hmc_profile {
-	/* I40E_HMC_PROFILE_NO_CHANGE    = 0, reserved */
-	I40E_HMC_PROFILE_DEFAULT	= 1,
-	I40E_HMC_PROFILE_FAVOR_VF	= 2,
-	I40E_HMC_PROFILE_EQUAL		= 3,
-};
-
-#define I40E_AQ_GET_HMC_RESOURCE_PROFILE_PM_MASK	0xF
-#define I40E_AQ_GET_HMC_RESOURCE_PROFILE_COUNT_MASK	0x3F
-
 /* Get PHY Abilities (indirect 0x0600) uses the generic indirect struct */
 
 /* set in param0 for get phy abilities to report qualified modules */