Commit 2bc61da9 authored by Chao Xie's avatar Chao Xie Committed by Michael Turquette

clk: mmp: add pxa910 DT support for clock driver

It adds the DT support for pxa910 clock subsystem.
Signed-off-by: default avatarChao Xie <chao.xie@marvell.com>
Acked-by: default avatarHaojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: default avatarMichael Turquette <mturquette@linaro.org>
parent ab08aefc
* Marvell PXA910 Clock Controller
The PXA910 clock subsystem generates and supplies clock to various
controllers within the PXA910 SoC.
Required Properties:
- compatible: should be one of the following.
- "marvell,pxa910-clock" - controller compatible with PXA910 SoC.
- reg: physical base address of the clock subsystem and length of memory mapped
region. There are 4 places in SOC has clock control logic:
"mpmu", "apmu", "apbc", "apbcp". So four reg spaces need to be defined.
- #clock-cells: should be 1.
- #reset-cells: should be 1.
Each clock is assigned an identifier and client nodes use this identifier
to specify the clock which they consume.
All these identifier could be found in <dt-bindings/clock/marvell-pxa910.h>.
......@@ -6,7 +6,7 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o
obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
......
/*
* pxa910 clock framework source file
*
* Copyright (C) 2012 Marvell
* Chao Xie <xiechao.mail@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/of_address.h>
#include <dt-bindings/clock/marvell,pxa910.h>
#include "clk.h"
#include "reset.h"
#define APBC_RTC 0x28
#define APBC_TWSI0 0x2c
#define APBC_KPC 0x18
#define APBC_UART0 0x0
#define APBC_UART1 0x4
#define APBC_GPIO 0x8
#define APBC_PWM0 0xc
#define APBC_PWM1 0x10
#define APBC_PWM2 0x14
#define APBC_PWM3 0x18
#define APBC_SSP0 0x1c
#define APBC_SSP1 0x20
#define APBC_SSP2 0x4c
#define APBCP_TWSI1 0x28
#define APBCP_UART2 0x1c
#define APMU_SDH0 0x54
#define APMU_SDH1 0x58
#define APMU_USB 0x5c
#define APMU_DISP0 0x4c
#define APMU_CCIC0 0x50
#define APMU_DFC 0x60
#define MPMU_UART_PLL 0x14
struct pxa910_clk_unit {
struct mmp_clk_unit unit;
void __iomem *mpmu_base;
void __iomem *apmu_base;
void __iomem *apbc_base;
void __iomem *apbcp_base;
};
static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
{PXA910_CLK_CLK32, "clk32", NULL, CLK_IS_ROOT, 32768},
{PXA910_CLK_VCTCXO, "vctcxo", NULL, CLK_IS_ROOT, 26000000},
{PXA910_CLK_PLL1, "pll1", NULL, CLK_IS_ROOT, 624000000},
};
static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
{PXA910_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0},
{PXA910_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0},
{PXA910_CLK_PLL1_8, "pll1_8", "pll1_4", 1, 2, 0},
{PXA910_CLK_PLL1_16, "pll1_16", "pll1_8", 1, 2, 0},
{PXA910_CLK_PLL1_6, "pll1_6", "pll1_2", 1, 3, 0},
{PXA910_CLK_PLL1_12, "pll1_12", "pll1_6", 1, 2, 0},
{PXA910_CLK_PLL1_24, "pll1_24", "pll1_12", 1, 2, 0},
{PXA910_CLK_PLL1_48, "pll1_48", "pll1_24", 1, 2, 0},
{PXA910_CLK_PLL1_96, "pll1_96", "pll1_48", 1, 2, 0},
{PXA910_CLK_PLL1_13, "pll1_13", "pll1", 1, 13, 0},
{PXA910_CLK_PLL1_13_1_5, "pll1_13_1_5", "pll1_13", 2, 3, 0},
{PXA910_CLK_PLL1_2_1_5, "pll1_2_1_5", "pll1_2", 2, 3, 0},
{PXA910_CLK_PLL1_3_16, "pll1_3_16", "pll1", 3, 16, 0},
};
static struct mmp_clk_factor_masks uart_factor_masks = {
.factor = 2,
.num_mask = 0x1fff,
.den_mask = 0x1fff,
.num_shift = 16,
.den_shift = 0,
};
static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
{.num = 8125, .den = 1536}, /*14.745MHZ */
};
static void pxa910_pll_init(struct pxa910_clk_unit *pxa_unit)
{
struct clk *clk;
struct mmp_clk_unit *unit = &pxa_unit->unit;
mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
ARRAY_SIZE(fixed_rate_clks));
mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
ARRAY_SIZE(fixed_factor_clks));
clk = mmp_clk_register_factor("uart_pll", "pll1_4",
CLK_SET_RATE_PARENT,
pxa_unit->mpmu_base + MPMU_UART_PLL,
&uart_factor_masks, uart_factor_tbl,
ARRAY_SIZE(uart_factor_tbl), NULL);
mmp_clk_add(unit, PXA910_CLK_UART_PLL, clk);
}
static DEFINE_SPINLOCK(uart0_lock);
static DEFINE_SPINLOCK(uart1_lock);
static DEFINE_SPINLOCK(uart2_lock);
static const char *uart_parent_names[] = {"pll1_3_16", "uart_pll"};
static DEFINE_SPINLOCK(ssp0_lock);
static DEFINE_SPINLOCK(ssp1_lock);
static const char *ssp_parent_names[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
static DEFINE_SPINLOCK(reset_lock);
static struct mmp_param_mux_clk apbc_mux_clks[] = {
{0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
{0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
{0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP0, 4, 3, 0, &ssp0_lock},
{0, "ssp1_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP1, 4, 3, 0, &ssp1_lock},
};
static struct mmp_param_mux_clk apbcp_mux_clks[] = {
{0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBCP_UART2, 4, 3, 0, &uart2_lock},
};
static struct mmp_param_gate_clk apbc_gate_clks[] = {
{PXA910_CLK_TWSI0, "twsi0_clk", "pll1_13_1_5", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x3, 0x3, 0x0, 0, &reset_lock},
{PXA910_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x3, 0x3, 0x0, 0, &reset_lock},
{PXA910_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x3, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
{PXA910_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x83, 0x83, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
{PXA910_CLK_PWM0, "pwm0_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM0, 0x3, 0x3, 0x0, 0, &reset_lock},
{PXA910_CLK_PWM1, "pwm1_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM1, 0x3, 0x3, 0x0, 0, &reset_lock},
{PXA910_CLK_PWM2, "pwm2_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM2, 0x3, 0x3, 0x0, 0, &reset_lock},
{PXA910_CLK_PWM3, "pwm3_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM3, 0x3, 0x3, 0x0, 0, &reset_lock},
/* The gate clocks has mux parent. */
{PXA910_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x3, 0x3, 0x0, 0, &uart0_lock},
{PXA910_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x3, 0x3, 0x0, 0, &uart1_lock},
{PXA910_CLK_SSP0, "ssp0_clk", "ssp0_mux", CLK_SET_RATE_PARENT, APBC_SSP0, 0x3, 0x3, 0x0, 0, &ssp0_lock},
{PXA910_CLK_SSP1, "ssp1_clk", "ssp1_mux", CLK_SET_RATE_PARENT, APBC_SSP1, 0x3, 0x3, 0x0, 0, &ssp1_lock},
};
static struct mmp_param_gate_clk apbcp_gate_clks[] = {
{PXA910_CLK_TWSI1, "twsi1_clk", "pll1_13_1_5", CLK_SET_RATE_PARENT, APBCP_TWSI1, 0x3, 0x3, 0x0, 0, &reset_lock},
/* The gate clocks has mux parent. */
{PXA910_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBCP_UART2, 0x3, 0x3, 0x0, 0, &uart2_lock},
};
static void pxa910_apb_periph_clk_init(struct pxa910_clk_unit *pxa_unit)
{
struct mmp_clk_unit *unit = &pxa_unit->unit;
mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
ARRAY_SIZE(apbc_mux_clks));
mmp_register_mux_clks(unit, apbcp_mux_clks, pxa_unit->apbcp_base,
ARRAY_SIZE(apbcp_mux_clks));
mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
ARRAY_SIZE(apbc_gate_clks));
mmp_register_gate_clks(unit, apbcp_gate_clks, pxa_unit->apbcp_base,
ARRAY_SIZE(apbcp_gate_clks));
}
static DEFINE_SPINLOCK(sdh0_lock);
static DEFINE_SPINLOCK(sdh1_lock);
static const char *sdh_parent_names[] = {"pll1_12", "pll1_13"};
static DEFINE_SPINLOCK(usb_lock);
static DEFINE_SPINLOCK(disp0_lock);
static const char *disp_parent_names[] = {"pll1_2", "pll1_12"};
static DEFINE_SPINLOCK(ccic0_lock);
static const char *ccic_parent_names[] = {"pll1_2", "pll1_12"};
static const char *ccic_phy_parent_names[] = {"pll1_6", "pll1_12"};
static struct mmp_param_mux_clk apmu_mux_clks[] = {
{0, "sdh0_mux", sdh_parent_names, ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT, APMU_SDH0, 6, 1, 0, &sdh0_lock},
{0, "sdh1_mux", sdh_parent_names, ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT, APMU_SDH1, 6, 1, 0, &sdh1_lock},
{0, "disp0_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP0, 6, 1, 0, &disp0_lock},
{0, "ccic0_mux", ccic_parent_names, ARRAY_SIZE(ccic_parent_names), CLK_SET_RATE_PARENT, APMU_CCIC0, 6, 1, 0, &ccic0_lock},
{0, "ccic0_phy_mux", ccic_phy_parent_names, ARRAY_SIZE(ccic_phy_parent_names), CLK_SET_RATE_PARENT, APMU_CCIC0, 7, 1, 0, &ccic0_lock},
};
static struct mmp_param_div_clk apmu_div_clks[] = {
{0, "ccic0_sphy_div", "ccic0_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 10, 5, 0, &ccic0_lock},
};
static struct mmp_param_gate_clk apmu_gate_clks[] = {
{PXA910_CLK_DFC, "dfc_clk", "pll1_4", CLK_SET_RATE_PARENT, APMU_DFC, 0x19b, 0x19b, 0x0, 0, NULL},
{PXA910_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock},
{PXA910_CLK_SPH, "sph_clk", "usb_pll", 0, APMU_USB, 0x12, 0x12, 0x0, 0, &usb_lock},
/* The gate clocks has mux parent. */
{PXA910_CLK_SDH0, "sdh0_clk", "sdh0_mux", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh0_lock},
{PXA910_CLK_SDH1, "sdh1_clk", "sdh1_mux", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh1_lock},
{PXA910_CLK_DISP0, "disp0_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1b, 0x1b, 0x0, 0, &disp0_lock},
{PXA910_CLK_CCIC0, "ccic0_clk", "ccic0_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1b, 0x1b, 0x0, 0, &ccic0_lock},
{PXA910_CLK_CCIC0_PHY, "ccic0_phy_clk", "ccic0_phy_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x24, 0x24, 0x0, 0, &ccic0_lock},
{PXA910_CLK_CCIC0_SPHY, "ccic0_sphy_clk", "ccic0_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x300, 0x300, 0x0, 0, &ccic0_lock},
};
static void pxa910_axi_periph_clk_init(struct pxa910_clk_unit *pxa_unit)
{
struct mmp_clk_unit *unit = &pxa_unit->unit;
mmp_register_mux_clks(unit, apmu_mux_clks, pxa_unit->apmu_base,
ARRAY_SIZE(apmu_mux_clks));
mmp_register_div_clks(unit, apmu_div_clks, pxa_unit->apmu_base,
ARRAY_SIZE(apmu_div_clks));
mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
ARRAY_SIZE(apmu_gate_clks));
}
static void pxa910_clk_reset_init(struct device_node *np,
struct pxa910_clk_unit *pxa_unit)
{
struct mmp_clk_reset_cell *cells;
int i, base, nr_resets_apbc, nr_resets_apbcp, nr_resets;
nr_resets_apbc = ARRAY_SIZE(apbc_gate_clks);
nr_resets_apbcp = ARRAY_SIZE(apbcp_gate_clks);
nr_resets = nr_resets_apbc + nr_resets_apbcp;
cells = kcalloc(nr_resets, sizeof(*cells), GFP_KERNEL);
if (!cells)
return;
base = 0;
for (i = 0; i < nr_resets_apbc; i++) {
cells[base + i].clk_id = apbc_gate_clks[i].id;
cells[base + i].reg =
pxa_unit->apbc_base + apbc_gate_clks[i].offset;
cells[base + i].flags = 0;
cells[base + i].lock = apbc_gate_clks[i].lock;
cells[base + i].bits = 0x4;
}
base = nr_resets_apbc;
for (i = 0; i < nr_resets_apbcp; i++) {
cells[base + i].clk_id = apbcp_gate_clks[i].id;
cells[base + i].reg =
pxa_unit->apbc_base + apbc_gate_clks[i].offset;
cells[base + i].flags = 0;
cells[base + i].lock = apbc_gate_clks[i].lock;
cells[base + i].bits = 0x4;
}
mmp_clk_reset_register(np, cells, nr_resets);
}
static void __init pxa910_clk_init(struct device_node *np)
{
struct pxa910_clk_unit *pxa_unit;
pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
if (!pxa_unit)
return;
pxa_unit->mpmu_base = of_iomap(np, 0);
if (!pxa_unit->mpmu_base) {
pr_err("failed to map mpmu registers\n");
return;
}
pxa_unit->apmu_base = of_iomap(np, 1);
if (!pxa_unit->mpmu_base) {
pr_err("failed to map apmu registers\n");
return;
}
pxa_unit->apbc_base = of_iomap(np, 2);
if (!pxa_unit->apbc_base) {
pr_err("failed to map apbc registers\n");
return;
}
pxa_unit->apbcp_base = of_iomap(np, 3);
if (!pxa_unit->mpmu_base) {
pr_err("failed to map apbcp registers\n");
return;
}
mmp_clk_init(np, &pxa_unit->unit, PXA910_NR_CLKS);
pxa910_pll_init(pxa_unit);
pxa910_apb_periph_clk_init(pxa_unit);
pxa910_axi_periph_clk_init(pxa_unit);
pxa910_clk_reset_init(np, pxa_unit);
}
CLK_OF_DECLARE(pxa910_clk, "marvell,pxa910-clock", pxa910_clk_init);
#ifndef __DTS_MARVELL_PXA910_CLOCK_H
#define __DTS_MARVELL_PXA910_CLOCK_H
/* fixed clocks and plls */
#define PXA910_CLK_CLK32 1
#define PXA910_CLK_VCTCXO 2
#define PXA910_CLK_PLL1 3
#define PXA910_CLK_PLL1_2 8
#define PXA910_CLK_PLL1_4 9
#define PXA910_CLK_PLL1_8 10
#define PXA910_CLK_PLL1_16 11
#define PXA910_CLK_PLL1_6 12
#define PXA910_CLK_PLL1_12 13
#define PXA910_CLK_PLL1_24 14
#define PXA910_CLK_PLL1_48 15
#define PXA910_CLK_PLL1_96 16
#define PXA910_CLK_PLL1_13 17
#define PXA910_CLK_PLL1_13_1_5 18
#define PXA910_CLK_PLL1_2_1_5 19
#define PXA910_CLK_PLL1_3_16 20
#define PXA910_CLK_UART_PLL 27
/* apb periphrals */
#define PXA910_CLK_TWSI0 60
#define PXA910_CLK_TWSI1 61
#define PXA910_CLK_TWSI2 62
#define PXA910_CLK_TWSI3 63
#define PXA910_CLK_GPIO 64
#define PXA910_CLK_KPC 65
#define PXA910_CLK_RTC 66
#define PXA910_CLK_PWM0 67
#define PXA910_CLK_PWM1 68
#define PXA910_CLK_PWM2 69
#define PXA910_CLK_PWM3 70
#define PXA910_CLK_UART0 71
#define PXA910_CLK_UART1 72
#define PXA910_CLK_UART2 73
#define PXA910_CLK_SSP0 74
#define PXA910_CLK_SSP1 75
/* axi periphrals */
#define PXA910_CLK_DFC 100
#define PXA910_CLK_SDH0 101
#define PXA910_CLK_SDH1 102
#define PXA910_CLK_SDH2 103
#define PXA910_CLK_USB 104
#define PXA910_CLK_SPH 105
#define PXA910_CLK_DISP0 106
#define PXA910_CLK_CCIC0 107
#define PXA910_CLK_CCIC0_PHY 108
#define PXA910_CLK_CCIC0_SPHY 109
#define PXA910_NR_CLKS 200
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment