Commit ab08aefc authored by Chao Xie's avatar Chao Xie Committed by Michael Turquette

clk: mmp: add pxa168 DT support for clock driver

It adds the DT support for pxa168 clock subsystem.
Signed-off-by: default avatarChao Xie <chao.xie@marvell.com>
Acked-by: default avatarHaojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: default avatarMichael Turquette <mturquette@linaro.org>
parent ae32a5b3
* Marvell PXA168 Clock Controller
The PXA168 clock subsystem generates and supplies clock to various
controllers within the PXA168 SoC.
Required Properties:
- compatible: should be one of the following.
- "marvell,pxa168-clock" - controller compatible with PXA168 SoC.
- reg: physical base address of the clock subsystem and length of memory mapped
region. There are 3 places in SOC has clock control logic:
"mpmu", "apmu", "apbc". So three reg spaces need to be defined.
- #clock-cells: should be 1.
- #reset-cells: should be 1.
Each clock is assigned an identifier and client nodes use this identifier
to specify the clock which they consume.
All these identifier could be found in <dt-bindings/clock/marvell,pxa168.h>.
......@@ -6,6 +6,8 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
This diff is collapsed.
#ifndef __DTS_MARVELL_PXA168_CLOCK_H
#define __DTS_MARVELL_PXA168_CLOCK_H
/* fixed clocks and plls */
#define PXA168_CLK_CLK32 1
#define PXA168_CLK_VCTCXO 2
#define PXA168_CLK_PLL1 3
#define PXA168_CLK_PLL1_2 8
#define PXA168_CLK_PLL1_4 9
#define PXA168_CLK_PLL1_8 10
#define PXA168_CLK_PLL1_16 11
#define PXA168_CLK_PLL1_6 12
#define PXA168_CLK_PLL1_12 13
#define PXA168_CLK_PLL1_24 14
#define PXA168_CLK_PLL1_48 15
#define PXA168_CLK_PLL1_96 16
#define PXA168_CLK_PLL1_13 17
#define PXA168_CLK_PLL1_13_1_5 18
#define PXA168_CLK_PLL1_2_1_5 19
#define PXA168_CLK_PLL1_3_16 20
#define PXA168_CLK_UART_PLL 27
/* apb periphrals */
#define PXA168_CLK_TWSI0 60
#define PXA168_CLK_TWSI1 61
#define PXA168_CLK_TWSI2 62
#define PXA168_CLK_TWSI3 63
#define PXA168_CLK_GPIO 64
#define PXA168_CLK_KPC 65
#define PXA168_CLK_RTC 66
#define PXA168_CLK_PWM0 67
#define PXA168_CLK_PWM1 68
#define PXA168_CLK_PWM2 69
#define PXA168_CLK_PWM3 70
#define PXA168_CLK_UART0 71
#define PXA168_CLK_UART1 72
#define PXA168_CLK_UART2 73
#define PXA168_CLK_SSP0 74
#define PXA168_CLK_SSP1 75
#define PXA168_CLK_SSP2 76
#define PXA168_CLK_SSP3 77
#define PXA168_CLK_SSP4 78
/* axi periphrals */
#define PXA168_CLK_DFC 100
#define PXA168_CLK_SDH0 101
#define PXA168_CLK_SDH1 102
#define PXA168_CLK_SDH2 103
#define PXA168_CLK_USB 104
#define PXA168_CLK_SPH 105
#define PXA168_CLK_DISP0 106
#define PXA168_CLK_CCIC0 107
#define PXA168_CLK_CCIC0_PHY 108
#define PXA168_CLK_CCIC0_SPHY 109
#define PXA168_NR_CLKS 200
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment