Commit 2bdd5238 authored by Sergio Paracuellos's avatar Sergio Paracuellos Committed by Bjorn Helgaas

PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver

Add driver for the PCIe controller of the MT7621 SoC.

[bhelgaas: rename from pci-mt7621.c to pcie-mt7621.c; also rename Kconfig
symbol from PCI_MT7621 to PCIE_MT7621]
Link: https://lore.kernel.org/r/20210922050035.18162-3-sergio.paracuellos@gmail.comSigned-off-by: default avatarSergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 27cee7d7
......@@ -51,7 +51,8 @@ choice
select SYS_SUPPORTS_HIGHMEM
select MIPS_GIC
select CLKSRC_MIPS_GIC
select HAVE_PCI if PCI_MT7621
select HAVE_PCI
select PCI_DRIVERS_GENERIC
select SOC_BUS
endchoice
......
......@@ -312,6 +312,14 @@ config PCIE_HISI_ERR
Say Y here if you want error handling support
for the PCIe controller's errors on HiSilicon HIP SoCs
config PCIE_MT7621
tristate "MediaTek MT7621 PCIe Controller"
depends on (RALINK && SOC_MT7621) || (MIPS && COMPILE_TEST)
select PHY_MT7621_PCI
default SOC_MT7621
help
This selects a driver for the MediaTek MT7621 PCIe Controller.
source "drivers/pci/controller/dwc/Kconfig"
source "drivers/pci/controller/mobiveil/Kconfig"
source "drivers/pci/controller/cadence/Kconfig"
......
......@@ -37,6 +37,8 @@ obj-$(CONFIG_VMD) += vmd.o
obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
obj-$(CONFIG_PCIE_HISI_ERR) += pcie-hisi-error.o
obj-$(CONFIG_PCIE_MT7621) += pcie-mt7621.o
# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
obj-y += dwc/
obj-y += mobiveil/
......
......@@ -30,18 +30,18 @@
#include <linux/reset.h>
#include <linux/sys_soc.h>
/* MediaTek specific configuration registers */
/* MediaTek-specific configuration registers */
#define PCIE_FTS_NUM 0x70c
#define PCIE_FTS_NUM_MASK GENMASK(15, 8)
#define PCIE_FTS_NUM_L0(x) (((x) & 0xff) << 8)
/* Host-PCI bridge registers */
#define RALINK_PCI_PCICFG_ADDR 0x0000
#define RALINK_PCI_PCIMSK_ADDR 0x000C
#define RALINK_PCI_PCIMSK_ADDR 0x000c
#define RALINK_PCI_CONFIG_ADDR 0x0020
#define RALINK_PCI_CONFIG_DATA 0x0024
#define RALINK_PCI_MEMBASE 0x0028
#define RALINK_PCI_IOBASE 0x002C
#define RALINK_PCI_IOBASE 0x002c
/* PCIe RC control registers */
#define RALINK_PCI_ID 0x0030
......@@ -132,7 +132,7 @@ static inline void pcie_port_write(struct mt7621_pcie_port *port,
static inline u32 mt7621_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
unsigned int func, unsigned int where)
{
return (((where & 0xF00) >> 8) << 24) | (bus << 16) | (slot << 11) |
return (((where & 0xf00) >> 8) << 24) | (bus << 16) | (slot << 11) |
(func << 8) | (where & 0xfc) | 0x80000000;
}
......@@ -217,7 +217,7 @@ static int setup_cm_memory_region(struct pci_host_bridge *host)
entry = resource_list_first_type(&host->windows, IORESOURCE_MEM);
if (!entry) {
dev_err(dev, "Cannot get memory resource\n");
dev_err(dev, "cannot get memory resource\n");
return -EINVAL;
}
......@@ -280,7 +280,7 @@ static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie,
port->gpio_rst = devm_gpiod_get_index_optional(dev, "reset", slot,
GPIOD_OUT_LOW);
if (IS_ERR(port->gpio_rst)) {
dev_err(dev, "Failed to get GPIO for PCIe%d\n", slot);
dev_err(dev, "failed to get GPIO for PCIe%d\n", slot);
err = PTR_ERR(port->gpio_rst);
goto remove_reset;
}
......@@ -409,7 +409,7 @@ static int mt7621_pcie_init_ports(struct mt7621_pcie *pcie)
err = mt7621_pcie_init_port(port);
if (err) {
dev_err(dev, "Initiating port %d failed\n", slot);
dev_err(dev, "initializing port %d failed\n", slot);
list_del(&port->list);
}
}
......@@ -476,7 +476,7 @@ static int mt7621_pcie_enable_ports(struct pci_host_bridge *host)
entry = resource_list_first_type(&host->windows, IORESOURCE_IO);
if (!entry) {
dev_err(dev, "Cannot get io resource\n");
dev_err(dev, "cannot get io resource\n");
return -EINVAL;
}
......@@ -541,25 +541,25 @@ static int mt7621_pci_probe(struct platform_device *pdev)
err = mt7621_pcie_parse_dt(pcie);
if (err) {
dev_err(dev, "Parsing DT failed\n");
dev_err(dev, "parsing DT failed\n");
return err;
}
err = mt7621_pcie_init_ports(pcie);
if (err) {
dev_err(dev, "Nothing connected in virtual bridges\n");
dev_err(dev, "nothing connected in virtual bridges\n");
return 0;
}
err = mt7621_pcie_enable_ports(bridge);
if (err) {
dev_err(dev, "Error enabling pcie ports\n");
dev_err(dev, "error enabling pcie ports\n");
goto remove_resets;
}
err = setup_cm_memory_region(bridge);
if (err) {
dev_err(dev, "Error setting up iocu mem regions\n");
dev_err(dev, "error setting up iocu mem regions\n");
goto remove_resets;
}
......
......@@ -86,8 +86,6 @@ source "drivers/staging/vc04_services/Kconfig"
source "drivers/staging/pi433/Kconfig"
source "drivers/staging/mt7621-pci/Kconfig"
source "drivers/staging/mt7621-dma/Kconfig"
source "drivers/staging/ralink-gdma/Kconfig"
......
......@@ -33,7 +33,6 @@ obj-$(CONFIG_KS7010) += ks7010/
obj-$(CONFIG_GREYBUS) += greybus/
obj-$(CONFIG_BCM2835_VCHIQ) += vc04_services/
obj-$(CONFIG_PI433) += pi433/
obj-$(CONFIG_PCI_MT7621) += mt7621-pci/
obj-$(CONFIG_SOC_MT7621) += mt7621-dma/
obj-$(CONFIG_DMA_RALINK) += ralink-gdma/
obj-$(CONFIG_SOC_MT7621) += mt7621-dts/
......
# SPDX-License-Identifier: GPL-2.0
config PCI_MT7621
tristate "MediaTek MT7621 PCI Controller"
depends on RALINK
select PCI_DRIVERS_GENERIC
help
This selects a driver for the MediaTek MT7621 PCI Controller.
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PCI_MT7621) += pci-mt7621.o
- general code review and cleanup
Cc: NeilBrown <neil@brown.name>
MediaTek MT7621 PCIe controller
Required properties:
- compatible: "mediatek,mt7621-pci"
- device_type: Must be "pci"
- reg: Base addresses and lengths of the PCIe subsys and root ports.
- bus-range: Range of bus numbers associated with this controller.
- #address-cells: Address representation for root ports (must be 3)
- pinctrl-names : The pin control state names.
- pinctrl-0: The "default" pinctrl state.
- #size-cells: Size representation for root ports (must be 2)
- ranges: Ranges for the PCI memory and I/O regions.
- #interrupt-cells: Must be 1
- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties.
Please refer to the standard PCI bus binding document for a more detailed
explanation.
- status: either "disabled" or "okay".
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must be "pcie0", "pcie1", "pcieN"... based on the number of
root ports.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must be "pcie0", "pcie1", "pcieN"... based on the number of
root ports.
- reset-gpios: GPIO specs for the reset pins.
In addition, the device tree node must have sub-nodes describing each PCIe port
interface, having the following mandatory properties:
Required properties:
- reg: Only the first four bytes are used to refer to the correct bus number
and device number.
- #address-cells: Must be 3
- #size-cells: Must be 2
- ranges: Sub-ranges distributed from the PCIe controller node. An empty
property is sufficient.
- bus-range: Range of bus numbers associated with this port.
Example for MT7621:
pcie: pcie@1e140000 {
compatible = "mediatek,mt7621-pci";
reg = <0x1e140000 0x100 /* host-pci bridge registers */
0x1e142000 0x100 /* pcie port 0 RC control registers */
0x1e143000 0x100 /* pcie port 1 RC control registers */
0x1e144000 0x100>; /* pcie port 2 RC control registers */
#address-cells = <3>;
#size-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
device_type = "pci";
bus-range = <0 255>;
ranges = <
0x02000000 0 0x00000000 0x60000000 0 0x10000000 /* pci memory */
0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */
>;
#interrupt-cells = <1>;
interrupt-map-mask = <0xF0000 0 0 1>;
interrupt-map = <0x10000 0 0 1 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
<0x20000 0 0 1 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
<0x30000 0 0 1 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
reset-names = "pcie0", "pcie1", "pcie2";
clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>;
clock-names = "pcie0", "pcie1", "pcie2";
reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
<&gpio 8 GPIO_ACTIVE_LOW>,
<&gpio 7 GPIO_ACTIVE_LOW>;
pcie@0,0 {
reg = <0x0000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
bus-range = <0x00 0xff>;
};
pcie@1,0 {
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
bus-range = <0x00 0xff>;
};
pcie@2,0 {
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
bus-range = <0x00 0xff>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment