V4L/DVB (13364): ec168: add new driver for E3C EC168 DVB USB

E3C EC168 DVB USB driver
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/dvb-usb/Kconfig

@@ -322,3 +322,11 @@ config DVB_USB_FRIIO
 	depends on DVB_USB
 	help
 	  Say Y here to support the Japanese DTV receiver Friio.
+
+config DVB_USB_EC168
+	tristate "E3C EC168 DVB-T USB2.0 support"
+	depends on DVB_USB && EXPERIMENTAL
+	select DVB_EC100
+	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+	help
+	  Say Y here to support the E3C EC168 DVB-T USB2.0 receiver.

drivers/media/dvb/dvb-usb/Makefile

@@ -82,6 +82,9 @@ obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o
 dvb-usb-friio-objs = friio.o friio-fe.o
 obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o
 
+dvb-usb-ec168-objs = ec168.o
+obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 EXTRA_CFLAGS += -Idrivers/media/common/tuners

drivers/media/dvb/dvb-usb/dvb-usb-ids.h

@@ -27,6 +27,7 @@
 #define USB_VID_DIBCOM				0x10b8
 #define USB_VID_DPOSH				0x1498
 #define USB_VID_DVICO				0x0fe9
+#define USB_VID_E3C				0x18b4
 #define USB_VID_ELGATO				0x0fd9
 #define USB_VID_EMPIA				0xeb1a
 #define USB_VID_GENPIX				0x09c0
@@ -104,6 +105,11 @@
 #define USB_PID_DIBCOM_STK7770P				0x1e80
 #define USB_PID_DPOSH_M9206_COLD			0x9206
 #define USB_PID_DPOSH_M9206_WARM			0xa090
+#define USB_PID_E3C_EC168				0x1689
+#define USB_PID_E3C_EC168_2				0xfffa
+#define USB_PID_E3C_EC168_3				0xfffb
+#define USB_PID_E3C_EC168_4				0x1001
+#define USB_PID_E3C_EC168_5				0x1002
 #define USB_PID_UNIWILL_STK7700P			0x6003
 #define USB_PID_GENIUS_TVGO_DVB_T03			0x4012
 #define USB_PID_GRANDTEC_DVBT_USB_COLD			0x0fa0

drivers/media/dvb/dvb-usb/ec168.h

+/*
+ * E3C EC168 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef EC168_H
+#define EC168_H
+
+#define DVB_USB_LOG_PREFIX "ec168"
+#include "dvb-usb.h"
+
+#define deb_info(args...) dprintk(dvb_usb_ec168_debug, 0x01, args)
+#define deb_rc(args...)   dprintk(dvb_usb_ec168_debug, 0x02, args)
+#define deb_xfer(args...) dprintk(dvb_usb_ec168_debug, 0x04, args)
+#define deb_reg(args...)  dprintk(dvb_usb_ec168_debug, 0x08, args)
+#define deb_i2c(args...)  dprintk(dvb_usb_ec168_debug, 0x10, args)
+#define deb_fw(args...)   dprintk(dvb_usb_ec168_debug, 0x20, args)
+
+#define ec168_debug_dump(r, t, v, i, b, l, func) { \
+	int loop_; \
+	func("%02x %02x %02x %02x %02x %02x %02x %02x", \
+		t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \
+	if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
+		func(" >>> "); \
+	else \
+		func(" <<< "); \
+	for (loop_ = 0; loop_ < l; loop_++) \
+		func("%02x ", b[loop_]); \
+	func("\n");\
+}
+
+#define EC168_USB_TIMEOUT 1000
+
+struct ec168_req {
+	u8  cmd;       /* [1] */
+	u16 value;     /* [2|3] */
+	u16 index;     /* [4|5] */
+	u16 size;      /* [6|7] */
+	u8  *data;
+};
+
+enum ec168_cmd {
+	DOWNLOAD_FIRMWARE    = 0x00,
+	CONFIG               = 0x01,
+	DEMOD_RW             = 0x03,
+	GPIO                 = 0x04,
+	STREAMING_CTRL       = 0x10,
+	READ_I2C             = 0x20,
+	WRITE_I2C            = 0x21,
+	HID_DOWNLOAD         = 0x30,
+	GET_CONFIG,
+	SET_CONFIG,
+	READ_DEMOD,
+	WRITE_DEMOD,
+};
+
+#endif