Skip to content

L
linux
Commit 2c241329 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files
Options

USB 

moved lots of the Config.in info into the subdirectories.
fixed up the makefiles to work nicer.
parent 1f7d665e
Hide whitespace changes
Inline Side-by-side
Showing with 298 additions and 151 deletions
drivers/usb/Config.in
View file @ 2c241329
...@@ -17,49 +17,10 @@ if [ "$CONFIG_USB" = "y" -o "$CONFIG_USB" = "m" ]; then ...@@ -17,49 +17,10 @@ if [ "$CONFIG_USB" = "y" -o "$CONFIG_USB" = "m" ]; then
fi fi
bool ' Long timeout for slow-responding devices (some MGE Ellipse UPSes)' CONFIG_USB_LONG_TIMEOUT bool ' Long timeout for slow-responding devices (some MGE Ellipse UPSes)' CONFIG_USB_LONG_TIMEOUT
comment 'USB Host Controller Drivers' source drivers/usb/host/Config.in
source drivers/usb/hcd/Config.in
if [ "$CONFIG_USB_UHCI_ALT" != "y" ]; then
dep_tristate ' UHCI (Intel PIIX4, VIA, ...) support' CONFIG_USB_UHCI $CONFIG_USB
fi
if [ "$CONFIG_USB_UHCI" != "y" ]; then
dep_tristate ' UHCI Alternate Driver (JE) support' CONFIG_USB_UHCI_ALT $CONFIG_USB
else
define_bool CONFIG_USB_UHCI_ALT n
fi
dep_tristate ' OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support' CONFIG_USB_OHCI $CONFIG_USB
comment 'USB Device Class drivers' source drivers/usb/class/Config.in
dep_tristate ' USB Audio support' CONFIG_USB_AUDIO $CONFIG_USB $CONFIG_SOUND
dep_tristate ' EMI 2|6 USB Audio interface support' CONFIG_USB_EMI26 $CONFIG_USB_AUDIO
dep_tristate ' USB Bluetooth support (EXPERIMENTAL)' CONFIG_USB_BLUETOOTH $CONFIG_USB $CONFIG_EXPERIMENTAL
if [ "$CONFIG_SCSI" = "n" ]; then
comment ' SCSI support is needed for USB Storage'
fi
dep_tristate ' USB Mass Storage support' CONFIG_USB_STORAGE $CONFIG_USB $CONFIG_SCSI
dep_mbool ' USB Mass Storage verbose debug' CONFIG_USB_STORAGE_DEBUG $CONFIG_USB_STORAGE
dep_mbool ' Datafab MDCFE-B Compact Flash Reader support' CONFIG_USB_STORAGE_DATAFAB $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' Freecom USB/ATAPI Bridge support' CONFIG_USB_STORAGE_FREECOM $CONFIG_USB_STORAGE
dep_mbool ' ISD-200 USB/ATA Bridge support' CONFIG_USB_STORAGE_ISD200 $CONFIG_USB_STORAGE
dep_mbool ' Microtech CompactFlash/SmartMedia support' CONFIG_USB_STORAGE_DPCM $CONFIG_USB_STORAGE
dep_mbool ' HP CD-Writer 82xx support' CONFIG_USB_STORAGE_HP8200e $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' SanDisk SDDR-09 (and other SmartMedia) support' CONFIG_USB_STORAGE_SDDR09 $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' Lexar Jumpshot Compact Flash Reader' CONFIG_USB_STORAGE_JUMPSHOT $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_tristate ' USB Modem (CDC ACM) support' CONFIG_USB_ACM $CONFIG_USB
dep_tristate ' USB Printer support' CONFIG_USB_PRINTER $CONFIG_USB
comment 'USB Human Interface Devices (HID)'
dep_tristate ' USB Human Interface Device (full HID) support' CONFIG_USB_HID $CONFIG_USB
if [ "$CONFIG_INPUT" = "n" ]; then
comment ' Input core support is needed for USB HID input layer or HIDBP support'
fi
dep_mbool ' HID input layer support' CONFIG_USB_HIDINPUT $CONFIG_INPUT $CONFIG_USB_HID
dep_mbool ' /dev/hiddev raw HID device support' CONFIG_USB_HIDDEV $CONFIG_USB_HID
if [ "$CONFIG_USB_HID" != "y" ]; then
dep_tristate ' USB HIDBP Keyboard (basic) support' CONFIG_USB_KBD $CONFIG_USB $CONFIG_INPUT
dep_tristate ' USB HIDBP Mouse (basic) support' CONFIG_USB_MOUSE $CONFIG_USB $CONFIG_INPUT
fi
dep_tristate ' Wacom Intuos/Graphire tablet support' CONFIG_USB_WACOM $CONFIG_USB $CONFIG_INPUT dep_tristate ' Wacom Intuos/Graphire tablet support' CONFIG_USB_WACOM $CONFIG_USB $CONFIG_INPUT
comment 'USB Imaging devices' comment 'USB Imaging devices'
...@@ -69,38 +30,16 @@ if [ "$CONFIG_USB" = "y" -o "$CONFIG_USB" = "m" ]; then ...@@ -69,38 +30,16 @@ if [ "$CONFIG_USB" = "y" -o "$CONFIG_USB" = "m" ]; then
dep_tristate ' Microtek X6USB scanner support' CONFIG_USB_MICROTEK $CONFIG_USB $CONFIG_SCSI dep_tristate ' Microtek X6USB scanner support' CONFIG_USB_MICROTEK $CONFIG_USB $CONFIG_SCSI
dep_tristate ' HP53xx USB scanner support (EXPERIMENTAL)' CONFIG_USB_HPUSBSCSI $CONFIG_USB $CONFIG_SCSI $CONFIG_EXPERIMENTAL dep_tristate ' HP53xx USB scanner support (EXPERIMENTAL)' CONFIG_USB_HPUSBSCSI $CONFIG_USB $CONFIG_SCSI $CONFIG_EXPERIMENTAL
comment 'USB Multimedia devices' source drivers/usb/media/Config.in
if [ "$CONFIG_VIDEO_DEV" = "n" ]; then
comment ' Video4Linux support is needed for USB Multimedia device support'
else
dep_tristate ' USB IBM (Xirlink) C-it Camera support' CONFIG_USB_IBMCAM $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB OV511 Camera support' CONFIG_USB_OV511 $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB Philips Cameras' CONFIG_USB_PWC $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB SE401 Camera support' CONFIG_USB_SE401 $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB STV680 (Pencam) Camera support' CONFIG_USB_STV680 $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)' CONFIG_USB_VICAM $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
dep_tristate ' D-Link USB FM radio support (EXPERIMENTAL)' CONFIG_USB_DSBR $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
dep_tristate ' DABUSB driver' CONFIG_USB_DABUSB $CONFIG_USB
dep_tristate ' USB Konica Webcam support' CONFIG_USB_KONICAWC $CONFIG_USB $CONFIG_VIDEO_DEV
fi
comment 'USB Network adaptors' source drivers/usb/net/Config.in
if [ "$CONFIG_NET" = "n" ]; then
comment ' Networking support is needed for USB Networking device support'
else
dep_tristate ' USB Pegasus/Pegasus-II based ethernet device support (EXPERIMENTAL)' CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB RTL8150 based ethernet device support (EXPERIMENTAL)' CONFIG_USB_RTL8150 $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB KLSI KL5USB101-based ethernet device support (EXPERIMENTAL)' CONFIG_USB_KAWETH $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CATC $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB Communication Class Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CDCETHER $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB-to-USB Networking cable device support (EXPERIMENTAL)' CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
fi
comment 'USB port drivers' comment 'USB port drivers'
dep_tristate ' USS720 parport driver' CONFIG_USB_USS720 $CONFIG_USB $CONFIG_PARPORT dep_tristate ' USS720 parport driver' CONFIG_USB_USS720 $CONFIG_USB $CONFIG_PARPORT
source drivers/usb/serial/Config.in source drivers/usb/serial/Config.in
comment 'USB Miscellaneous drivers' comment 'USB Miscellaneous drivers'
dep_tristate ' EMI 2|6 USB Audio interface support' CONFIG_USB_EMI26 $CONFIG_USB_AUDIO
dep_tristate ' USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500 $CONFIG_USB $CONFIG_EXPERIMENTAL dep_tristate ' USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500 $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' USB Auerswald ISDN support (EXPERIMENTAL)' CONFIG_USB_AUERSWALD $CONFIG_USB $CONFIG_EXPERIMENTAL dep_tristate ' USB Auerswald ISDN support (EXPERIMENTAL)' CONFIG_USB_AUERSWALD $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' Texas Instruments Graph Link USB (aka SilverLink) cable support' CONFIG_USB_TIGL $CONFIG_USB dep_tristate ' Texas Instruments Graph Link USB (aka SilverLink) cable support' CONFIG_USB_TIGL $CONFIG_USB
......
drivers/usb/Makefile
View file @ 2c241329
...@@ -2,109 +2,90 @@ ...@@ -2,109 +2,90 @@
# Makefile for the kernel USB device drivers. # Makefile for the kernel USB device drivers.
# #
# The target object and module list name.
O_TARGET := usbdrv.o O_TARGET := usbdrv.o
# Objects that export symbols.
export-objs := media/ov511.o media/pwc-uncompress.o
# Multipart objects.
hid-objs := class/hid-core.o
pwc-objs := media/pwc-if.o media/pwc-misc.o media/pwc-ctrl.o media/pwc-uncompress.o
# Optional parts of multipart objects.
ifeq ($(CONFIG_USB_HIDDEV),y)
hid-objs += class/hiddev.o
endif
ifeq ($(CONFIG_USB_HIDINPUT),y)
hid-objs += class/hid-input.o
endif
# Object file lists.
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Each configuration option enables a list of files.
# EHCI needs to be linked before the other HCD drivers
ifeq ($(CONFIG_USB_EHCI_HCD),y)
obj-y += host/ehci-hcd.o
endif
ifeq ($(CONFIG_USB_OHCI_HCD),y)
obj-y += host/ohci-hcd.o
endif
obj-$(CONFIG_USB_MOUSE) += class/usbmouse.o
obj-$(CONFIG_USB_HID) += class/hid.o
obj-$(CONFIG_USB_KBD) += class/usbkbd.o
obj-$(CONFIG_USB_ACM) += class/cdc-acm.o
obj-$(CONFIG_USB_PRINTER) += class/printer.o
obj-$(CONFIG_USB_AUDIO) += class/audio.o
obj-$(CONFIG_USB_CDCETHER) += class/cdc-ether.o
obj-$(CONFIG_USB_BLUETOOTH) += class/bluetooth.o
obj-$(CONFIG_USB_WACOM) += misc/wacom.o
obj-$(CONFIG_USB_SCANNER) += scanner/scanner.o
obj-$(CONFIG_USB_EMI26) += misc/emi26.o
obj-$(CONFIG_USB_IBMCAM) += media/ibmcam.o media/usbvideo.o media/ultracam.o
obj-$(CONFIG_USB_KONICAWC) += media/konicawc.o media/usbvideo.o
obj-$(CONFIG_USB_PWC) += media/pwc.o
obj-$(CONFIG_USB_DC2XX) += misc/dc2xx.o
obj-$(CONFIG_USB_MDC800) += misc/mdc800.o
obj-$(CONFIG_USB_USS720) += misc/uss720.o
obj-$(CONFIG_USB_DABUSB) += misc/dabusb.o
obj-$(CONFIG_USB_VICAM) += media/vicam.o
obj-$(CONFIG_USB_OV511) += media/ov511.o
obj-$(CONFIG_USB_SE401) += media/se401.o
obj-$(CONFIG_USB_STV680) += media/stv680.o
obj-$(CONFIG_USB_PEGASUS) += net/pegasus.o
obj-$(CONFIG_USB_RTL8150) += net/rtl8150.o
obj-$(CONFIG_USB_CATC) += net/catc.o
obj-$(CONFIG_USB_KAWETH) += net/kaweth.o
obj-$(CONFIG_USB_RIO500) += misc/rio500.o
obj-$(CONFIG_USB_DSBR) += media/dsbr100.o
obj-$(CONFIG_USB_MICROTEK) += scanner/microtek.o
obj-$(CONFIG_USB_HPUSBSCSI) += scanner/hpusbscsi.o
obj-$(CONFIG_USB_USBNET) += net/usbnet.o
obj-$(CONFIG_USB_AUERSWALD) += misc/auerswald.o
obj-$(CONFIG_USB_TIGL) += misc/tiglusb.o
# Object files in subdirectories # Object files in subdirectories
mod-subdirs := core host serial mod-subdirs := core host class media net serial scanner misc
subdir-$(CONFIG_USB) += core subdir-$(CONFIG_USB) += core
ifeq ($(CONFIG_USB),y)
obj-y += core/usb-core.o
endif
subdir-$(CONFIG_USB_EHCI_HCD) += host subdir-$(CONFIG_USB_EHCI_HCD) += host
subdir-$(CONFIG_USB_OHCI_HCD) += host subdir-$(CONFIG_USB_OHCI_HCD) += host
subdir-$(CONFIG_USB_UHCI) += host subdir-$(CONFIG_USB_UHCI) += host
subdir-$(CONFIG_USB_UHCI_ALT) += host subdir-$(CONFIG_USB_UHCI_ALT) += host
subdir-$(CONFIG_USB_OHCI) += host subdir-$(CONFIG_USB_OHCI) += host
subdir-$(CONFIG_USB_SERIAL) += serial ifeq ($(CONFIG_USB_HOST),y)
obj-y += host/usb-host.o
endif
subdir-$(CONFIG_USB_ACM) += class
subdir-$(CONFIG_USB_AUDIO) += class
subdir-$(CONFIG_USB_BLUETOOTH) += class
subdir-$(CONFIG_USB_CDCETHER) += class
subdir-$(CONFIG_USB_HID) += class
subdir-$(CONFIG_USB_KBD) += class
subdir-$(CONFIG_USB_MOUSE) += class
subdir-$(CONFIG_USB_PRINTER) += class
ifeq ($(CONFIG_USB_CLASS),y)
obj-y += class/usb-class.o
endif
subdir-$(CONFIG_USB_STORAGE) += class/storage subdir-$(CONFIG_USB_STORAGE) += class/storage
ifeq ($(CONFIG_USB_STORAGE),y)
obj-y += class/storage/storage.o
endif
ifeq ($(CONFIG_USB),y) subdir-$(CONFIG_USB_IBMCAM) += media
obj-y += core/usb-core.o subdir-$(CONFIG_USB_KONICAWC) += media
subdir-$(CONFIG_USB_PWC) += media
subdir-$(CONFIG_USB_VICAM) += media
subdir-$(CONFIG_USB_OV511) += media
subdir-$(CONFIG_USB_SE401) += media
subdir-$(CONFIG_USB_STV680) += media
subdir-$(CONFIG_USB_DSBR) += media
ifeq ($(CONFIG_USB_MEDIA),y)
obj-y += media/usb-media.o
endif endif
ifeq ($(CONFIG_USB_EHCI_HCD),y) subdir-$(CONFIG_USB_PEGASUS) += net
obj-y += host/usb-host.o subdir-$(CONFIG_USB_RTL8150) += net
subdir-$(CONFIG_USB_CATC) += net
subdir-$(CONFIG_USB_KAWETH) += net
subdir-$(CONFIG_USB_USBNET) += net
ifeq ($(CONFIG_USB_NET),y)
obj-y += net/usb-net.o
endif
subdir-$(CONFIG_USB_MICROTEK) += scanner
subdir-$(CONFIG_USB_HPUSBSCSI) += scanner
subdir-$(CONFIG_USB_SCANNER) += scanner
ifeq ($(CONFIG_USB_MICROTEK),y)
obj-y += scanner/usb-scanner.o
endif
ifeq ($(CONFIG_USB_HPUSBSCSI),y)
obj-y += scanner/usb-scanner.o
endif
ifeq ($(CONFIG_USB_SCANNER),y)
obj-y += scanner/usb-scanner.o
endif endif
subdir-$(CONFIG_USB_SERIAL) += serial
ifeq ($(CONFIG_USB_SERIAL),y) ifeq ($(CONFIG_USB_SERIAL),y)
obj-y += serial/usb-serial.o obj-y += serial/usb-serial.o
endif endif
ifeq ($(CONFIG_USB_STORAGE),y) subdir-$(CONFIG_USB_AUERSWALD) += misc
obj-y += class/storage/storage.o subdir-$(CONFIG_USB_DABUSB) += misc
endif subdir-$(CONFIG_USB_DC2XX) += misc
subdir-$(CONFIG_USB_EMI26) += misc
subdir-$(CONFIG_USB_MDC800) += misc
subdir-$(CONFIG_USB_RIO500) += misc
subdir-$(CONFIG_USB_TIGL) += misc
subdir-$(CONFIG_USB_USS720) += misc
subdir-$(CONFIG_USB_WACOM) += misc
include $(TOPDIR)/Rules.make include $(TOPDIR)/Rules.make
drivers/usb/class/Config.in 0 → 100644
View file @ 2c241329
#
# USB Class driver configuration
#
comment 'USB Device Class drivers'
dep_tristate ' USB Audio support' CONFIG_USB_AUDIO $CONFIG_USB $CONFIG_SOUND
dep_tristate ' USB Bluetooth support (EXPERIMENTAL)' CONFIG_USB_BLUETOOTH $CONFIG_USB $CONFIG_EXPERIMENTAL
if [ "$CONFIG_SCSI" = "n" ]; then
comment ' SCSI support is needed for USB Storage'
fi
dep_tristate ' USB Mass Storage support' CONFIG_USB_STORAGE $CONFIG_USB $CONFIG_SCSI
dep_mbool ' USB Mass Storage verbose debug' CONFIG_USB_STORAGE_DEBUG $CONFIG_USB_STORAGE
dep_mbool ' Datafab MDCFE-B Compact Flash Reader support' CONFIG_USB_STORAGE_DATAFAB $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' Freecom USB/ATAPI Bridge support' CONFIG_USB_STORAGE_FREECOM $CONFIG_USB_STORAGE
dep_mbool ' ISD-200 USB/ATA Bridge support' CONFIG_USB_STORAGE_ISD200 $CONFIG_USB_STORAGE
dep_mbool ' Microtech CompactFlash/SmartMedia support' CONFIG_USB_STORAGE_DPCM $CONFIG_USB_STORAGE
dep_mbool ' HP CD-Writer 82xx support' CONFIG_USB_STORAGE_HP8200e $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' SanDisk SDDR-09 (and other SmartMedia) support' CONFIG_USB_STORAGE_SDDR09 $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' Lexar Jumpshot Compact Flash Reader' CONFIG_USB_STORAGE_JUMPSHOT $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_tristate ' USB Modem (CDC ACM) support' CONFIG_USB_ACM $CONFIG_USB
dep_tristate ' USB Printer support' CONFIG_USB_PRINTER $CONFIG_USB
comment 'USB Human Interface Devices (HID)'
dep_tristate ' USB Human Interface Device (full HID) support' CONFIG_USB_HID $CONFIG_USB
if [ "$CONFIG_INPUT" = "n" ]; then
comment ' Input core support is needed for USB HID input layer or HIDBP support'
fi
dep_mbool ' HID input layer support' CONFIG_USB_HIDINPUT $CONFIG_INPUT $CONFIG_USB_HID
dep_mbool ' /dev/hiddev raw HID device support' CONFIG_USB_HIDDEV $CONFIG_USB_HID
if [ "$CONFIG_USB_HID" != "y" ]; then
dep_tristate ' USB HIDBP Keyboard (basic) support' CONFIG_USB_KBD $CONFIG_USB $CONFIG_INPUT
dep_tristate ' USB HIDBP Mouse (basic) support' CONFIG_USB_MOUSE $CONFIG_USB $CONFIG_INPUT
fi
# Turn on CONFIG_USB_CLASS if any of the drivers are compiled into the kernel
# to make our Makefile logic a bit simpler.
if [ "$CONFIG_USB_AUDIO" = "y" -o "$CONFIG_USB_BLUETOOTH" = "y" -o "$CONFIG_USB_ACM" = "y" ]; then
define_bool CONFIG_USB_CLASS y
fi
if [ "$CONFIG_USB_PRINTER" = "y" ]; then
define_bool CONFIG_USB_CLASS y
fi
if [ "$CONFIG_USB_HID" = "y" -o "$CONFIG_USB_KBD" = "y" -o "$CONFIG_USB_MOUSE" = "y" ]; then
define_bool CONFIG_USB_CLASS y
fi
drivers/usb/class/Makefile 0 → 100644
View file @ 2c241329
#
# Makefile for USB Class drivers
#
O_TARGET := usb-class.o
# Multipart objects.
hid-objs := hid-core.o
# Optional parts of multipart objects.
ifeq ($(CONFIG_USB_HIDDEV),y)
hid-objs += hiddev.o
endif
ifeq ($(CONFIG_USB_HIDINPUT),y)
hid-objs += hid-input.o
endif
obj-$(CONFIG_USB_ACM) += cdc-acm.o
obj-$(CONFIG_USB_AUDIO) += audio.o
obj-$(CONFIG_USB_BLUETOOTH) += bluetooth.o
obj-$(CONFIG_USB_CDCETHER) += cdc-ether.o
obj-$(CONFIG_USB_HID) += hid.o
obj-$(CONFIG_USB_KBD) += usbkbd.o
obj-$(CONFIG_USB_MOUSE) += usbmouse.o
obj-$(CONFIG_USB_PRINTER) += printer.o
include $(TOPDIR)/Rules.make
drivers/usb/core/Makefile 0 → 100644
View file @ 2c241329
#
# Makefile for USB Core files and filesystem
#
O_TARGET := usb-core.o
export-objs := usb.o hcd.o
usbcore-objs := usb.o usb-debug.o hub.o hcd.o
ifeq ($(CONFIG_USB_DEVICEFS),y)
usbcore-objs += devio.o inode.o drivers.o devices.o
endif
obj-$(CONFIG_USB) += usbcore.o
include $(TOPDIR)/Rules.make
drivers/usb/core/fs/devices.c → drivers/usb/core/devices.c
View file @ 2c241329
...@@ -59,7 +59,7 @@ ...@@ -59,7 +59,7 @@
#include <linux/usbdevice_fs.h> #include <linux/usbdevice_fs.h>
#include <asm/uaccess.h> #include <asm/uaccess.h>
#include "../hcd.h" #include "hcd.h"
#define MAX_TOPO_LEVEL 6 #define MAX_TOPO_LEVEL 6
......
drivers/usb/host/Config.in
View file @ 2c241329
# #
# USB Host Controller Drivers # USB Host Controller Drivers
# #
comment 'USB Host Controller Drivers'
dep_tristate ' EHCI HCD (USB 2.0) support (EXPERIMENTAL)' CONFIG_USB_EHCI_HCD $CONFIG_USB $CONFIG_EXPERIMENTAL dep_tristate ' EHCI HCD (USB 2.0) support (EXPERIMENTAL)' CONFIG_USB_EHCI_HCD $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' OHCI HCD support (EXPERIMENTAL)' CONFIG_USB_OHCI_HCD $CONFIG_USB $CONFIG_EXPERIMENTAL dep_tristate ' OHCI HCD support (EXPERIMENTAL)' CONFIG_USB_OHCI_HCD $CONFIG_USB $CONFIG_EXPERIMENTAL
# dep_tristate ' UHCI HCD (most Intel and VIA) support (EXPERIMENTAL)' CONFIG_USB_UHCI_HCD $CONFIG_USB $CONFIG_EXPERIMENTAL # dep_tristate ' UHCI HCD (most Intel and VIA) support (EXPERIMENTAL)' CONFIG_USB_UHCI_HCD $CONFIG_USB $CONFIG_EXPERIMENTAL
if [ "$CONFIG_USB_UHCI_ALT" != "y" ]; then
dep_tristate ' UHCI (Intel PIIX4, VIA, ...) support' CONFIG_USB_UHCI $CONFIG_USB
fi
if [ "$CONFIG_USB_UHCI" != "y" ]; then
dep_tristate ' UHCI Alternate Driver (JE) support' CONFIG_USB_UHCI_ALT $CONFIG_USB
else
define_bool CONFIG_USB_UHCI_ALT n
fi
dep_tristate ' OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support' CONFIG_USB_OHCI $CONFIG_USB
# Turn on CONFIG_USB_HOST if any of the Host controller drivers are compiled
# into the kernel to make our Makefile logic a bit simpler
if [ "$CONFIG_USB_EHCI_HCD" = "y" -o "$CONFIG_USB_OHCI_HCD" = "y" -o "$CONFIG_USB_UHCI_HCD" = "y" ]; then
define_bool CONFIG_USB_HOST y
fi
if [ "$CONFIG_USB_UHCI" = "y" -o "$CONFIG_USB_UHCI_ALT" = "y" -o "$CONFIG_USB_OHCI" = "y" ]; then
define_bool CONFIG_USB_HOST y
fi
drivers/usb/media/Config.in 0 → 100644
View file @ 2c241329
#
# USB Multimedia device configuration
#
comment 'USB Multimedia devices'
if [ "$CONFIG_VIDEO_DEV" = "n" ]; then
comment ' Video4Linux support is needed for USB Multimedia device support'
else
dep_tristate ' USB IBM (Xirlink) C-it Camera support' CONFIG_USB_IBMCAM $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB OV511 Camera support' CONFIG_USB_OV511 $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB Philips Cameras' CONFIG_USB_PWC $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB SE401 Camera support' CONFIG_USB_SE401 $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB STV680 (Pencam) Camera support' CONFIG_USB_STV680 $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)' CONFIG_USB_VICAM $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
dep_tristate ' D-Link USB FM radio support (EXPERIMENTAL)' CONFIG_USB_DSBR $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
dep_tristate ' DABUSB driver' CONFIG_USB_DABUSB $CONFIG_USB
dep_tristate ' USB Konica Webcam support' CONFIG_USB_KONICAWC $CONFIG_USB $CONFIG_VIDEO_DEV
fi
# Turn on CONFIG_USB_MEDIA if any of the drivers are compiled into the kernel
# to make our Makefile logic a bit simpler
if [ "$CONFIG_USB_IBMCAM" = "y" -o "$CONFIG_USB_OV511" = "y" -o "$CONFIG_USB_PWC" = "y" ]; then
define_bool CONFIG_USB_MEDIA y
fi
if [ "$CONFIG_USB_SE401" = "y" -o "$CONFIG_USB_STV680" = "y" -o "$CONFIG_USB_VICAM" = "y" ]; then
define_bool CONFIG_USB_MEDIA y
fi
if [ "$CONFIG_USB_DSBR" = "y" -o "$CONFIG_USB_DABUSB" = "y" -o "$CONFIG_USB_KONICAWC" = "y" ]; then
define_bool CONFIG_USB_MEDIA y
fi
drivers/usb/media/Makefile 0 → 100644
View file @ 2c241329
#
# Makefile for USB Media drivers
#
O_TARGET := usb-media.o
export-objs := ov511.o pwc-uncompress.o
pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o
obj-$(CONFIG_USB_DSBR) += dsbr100.o
obj-$(CONFIG_USB_IBMCAM) += ibmcam.o usbvideo.o ultracam.o
obj-$(CONFIG_USB_KONICAWC) += konicawc.o usbvideo.o
obj-$(CONFIG_USB_OV511) += ov511.o
obj-$(CONFIG_USB_PWC) += pwc.o
obj-$(CONFIG_USB_SE401) += se401.o
obj-$(CONFIG_USB_STV680) += stv680.o
obj-$(CONFIG_USB_VICAM) += vicam.o
include $(TOPDIR)/Rules.make
drivers/usb/misc/Makefile 0 → 100644
View file @ 2c241329
#
# Makefile for the rest of the USB drivers
# (the ones that don't fit into any other categories)
#
O_TARGET := usb-misc.o
obj-$(CONFIG_USB_AUERSWALD) += auerswald.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_DC2XX) += dc2xx.o
obj-$(CONFIG_USB_EMI26) += emi26.o
obj-$(CONFIG_USB_MDC800) += mdc800.o
obj-$(CONFIG_USB_RIO500) += rio500.o
obj-$(CONFIG_USB_TIGL) += tiglusb.o
obj-$(CONFIG_USB_USS720) += uss720.o
obj-$(CONFIG_USB_WACOM) += wacom.o
include $(TOPDIR)/Rules.make
drivers/usb/net/Config.in 0 → 100644
View file @ 2c241329
#
# USB Network devices configuration
#
comment 'USB Network adaptors'
if [ "$CONFIG_NET" = "n" ]; then
comment ' Networking support is needed for USB Networking device support'
else
dep_tristate ' USB Pegasus/Pegasus-II based ethernet device support (EXPERIMENTAL)' CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB RTL8150 based ethernet device support (EXPERIMENTAL)' CONFIG_USB_RTL8150 $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB KLSI KL5USB101-based ethernet device support (EXPERIMENTAL)' CONFIG_USB_KAWETH $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CATC $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB Communication Class Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CDCETHER $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB-to-USB Networking cable device support (EXPERIMENTAL)' CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
fi
# Turn on CONFIG_USB_NET if any of the drivers are compiled into the kernel to
# make our Makefile logic a bit simpler
if [ "$CONFIG_USB_PEGASUS" = "y" -o "$CONFIG_USB_RTL8150" = "y" -o "$CONFIG_USB_KAWETH" = "y" ]; then
define_bool CONFIG_USB_NET y
fi
if [ "$CONFIG_USB_CATC" = "y" -o "$CONFIG_USB_CDCETHER" = "y" -o "$CONFIG_USB_USBNET" = "y" ]; then
define_bool CONFIG_USB_NET y
fi
drivers/usb/net/Makefile 0 → 100644
View file @ 2c241329
#
# Makefile for USB Network drivers
#
O_TARGET := usb-net.o
obj-$(CONFIG_USB_CATC) += catc.o
obj-$(CONFIG_USB_KAWETH) += kaweth.o
obj-$(CONFIG_USB_PEGASUS) += pegasus.o
obj-$(CONFIG_USB_RTL8150) += rtl8150.o
obj-$(CONFIG_USB_USBNET) += usbnet.o
include $(TOPDIR)/Rules.make
drivers/usb/scanner/Makefile 0 → 100644
View file @ 2c241329
#
# Makefile for USB Scanner drivers
#
O_TARGET := usb-scanner.o
obj-$(CONFIG_USB_HPUSBSCSI) += hpusbscsi.o
obj-$(CONFIG_USB_MICROTEK) += microtek.o
obj-$(CONFIG_USB_SCANNER) += scanner.o
include $(TOPDIR)/Rules.make
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7