ARM: sti: Provide DT nodes for SSC[0..4]

The Synchronous Serial Controller is used to provide SPI.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

arch/arm/boot/dts/stih407-family.dtsi

@@ -336,5 +336,59 @@ phy_port2: port@8f95000 {
 				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
 			};
 		};
+
+		spi@9840000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9840000 0x110>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-0 = <&pinctrl_spi0_default>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9841000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9842000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9843000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9844000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
 	};
 };