Commit 2c6221e4 authored by Nguyen Hong Ky's avatar Nguyen Hong Ky Committed by David S. Miller

net: sh_eth: Fix RX packets errors on R8A7740

This patch will fix RX packets errors when receiving big size
of data by set bit RNC = 1.

RNC - Receive Enable Control

0: Upon completion of reception of one frame, the E-DMAC writes
the receive status to the descriptor and clears the RR bit in
EDRRR to 0.

1: Upon completion of reception of one frame, the E-DMAC writes
(writes back) the receive status to the descriptor. In addition,
the E-DMAC reads the next descriptor and prepares for reception
of the next frame.

In addition, for get more stable when receiving packets, I set
maximum size for the transmit/receive FIFO and inserts padding
in receive data.
Signed-off-by: default avatarNguyen Hong Ky <nh-ky@jinso.co.jp>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 8d8a51e2
......@@ -620,12 +620,16 @@ static struct sh_eth_cpu_data sh7734_data = {
.eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
EESR_TDE | EESR_ECI,
.fdr_value = 0x0000070f,
.rmcr_value = 0x00000001,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.bculr = 1,
.hw_swap = 1,
.rpadir = 1,
.rpadir_value = 2 << 16,
.no_trimd = 1,
.no_ade = 1,
.tsu = 1,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment