ARM: i2c: omap: Remove the i207 errata flag

The commit [i2c: omap: use revision check for OMAP_I2C_FLAG_APPLY_ERRATA_I207]
uses the revision id instead of the flag. So the flag can be safely removed.
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>

arch/arm/mach-omap2/omap_hwmod_2430_data.c

@@ -76,8 +76,7 @@ static struct omap_hwmod_class i2c_class = {
 
 static struct omap_i2c_dev_attr i2c_dev_attr = {
 	.fifo_depth	= 8, /* bytes */
-	.flags		= OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
-			  OMAP_I2C_FLAG_BUS_SHIFT_2 |
+	.flags		= OMAP_I2C_FLAG_BUS_SHIFT_2 |
 			  OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
 };
 

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -791,8 +791,7 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
 /* I2C1 */
 static struct omap_i2c_dev_attr i2c1_dev_attr = {
 	.fifo_depth	= 8, /* bytes */
-	.flags		= OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
-			  OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+	.flags		= OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
 			  OMAP_I2C_FLAG_BUS_SHIFT_2,
 };
 
@@ -818,8 +817,7 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = {
 /* I2C2 */
 static struct omap_i2c_dev_attr i2c2_dev_attr = {
 	.fifo_depth	= 8, /* bytes */
-	.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
-		 OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+	.flags = OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
 		 OMAP_I2C_FLAG_BUS_SHIFT_2,
 };
 
@@ -845,8 +843,7 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = {
 /* I2C3 */
 static struct omap_i2c_dev_attr i2c3_dev_attr = {
 	.fifo_depth	= 64, /* bytes */
-	.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
-		 OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+	.flags = OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
 		 OMAP_I2C_FLAG_BUS_SHIFT_2,
 };
 

drivers/i2c/busses/i2c-omap.c

@@ -1028,8 +1028,7 @@ static const struct i2c_algorithm omap_i2c_algo = {
 #ifdef CONFIG_OF
 static struct omap_i2c_bus_platform_data omap3_pdata = {
 	.rev = OMAP_I2C_IP_VERSION_1,
-	.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
-		 OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+	.flags = OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
 		 OMAP_I2C_FLAG_BUS_SHIFT_2,
 };
 

include/linux/i2c-omap.h

@@ -21,7 +21,6 @@
 #define OMAP_I2C_FLAG_SIMPLE_CLOCK		BIT(1)
 #define OMAP_I2C_FLAG_16BIT_DATA_REG		BIT(2)
 #define OMAP_I2C_FLAG_RESET_REGS_POSTIDLE	BIT(3)
-#define OMAP_I2C_FLAG_APPLY_ERRATA_I207	BIT(4)
 #define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK	BIT(5)
 #define OMAP_I2C_FLAG_FORCE_19200_INT_CLK	BIT(6)
 /* how the CPU address bus must be translated for I2C unit access */