Commit 2c8920ff authored by Nishant Malpani's avatar Nishant Malpani Committed by Jonathan Cameron

iio: gyro: Add driver support for ADXRS290

ADXRS290 is a high performance MEMS pitch and roll (dual-axis in-plane)
angular rate sensor (gyroscope) designed for use in stabilization
applications. It also features an internal temperature sensor and
programmable high-pass and low-pass filters.

Add support for ADXRS290 in direct-access mode for now.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXRS290.pdfReviewed-by: default avatarAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: default avatarNishant Malpani <nish.malpani25@gmail.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 96f96251
...@@ -1108,6 +1108,12 @@ L: linux-media@vger.kernel.org ...@@ -1108,6 +1108,12 @@ L: linux-media@vger.kernel.org
S: Maintained S: Maintained
F: drivers/media/i2c/adv7842* F: drivers/media/i2c/adv7842*
ANALOG DEVICES INC ADXRS290 DRIVER
M: Nishant Malpani <nish.malpani25@gmail.com>
L: linux-iio@vger.kernel.org
S: Supported
F: drivers/iio/gyro/adxrs290.c
ANALOG DEVICES INC ASOC CODEC DRIVERS ANALOG DEVICES INC ASOC CODEC DRIVERS
M: Lars-Peter Clausen <lars@metafoo.de> M: Lars-Peter Clausen <lars@metafoo.de>
M: Nuno Sá <nuno.sa@analog.com> M: Nuno Sá <nuno.sa@analog.com>
......
...@@ -41,6 +41,16 @@ config ADIS16260 ...@@ -41,6 +41,16 @@ config ADIS16260
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called adis16260. will be called adis16260.
config ADXRS290
tristate "Analog Devices ADXRS290 Dual-Axis MEMS Gyroscope SPI driver"
depends on SPI
help
Say yes here to build support for Analog Devices ADXRS290 programmable
digital output gyroscope.
This driver can also be built as a module. If so, the module will be
called adxrs290.
config ADXRS450 config ADXRS450
tristate "Analog Devices ADXRS450/3 Digital Output Gyroscope SPI driver" tristate "Analog Devices ADXRS450/3 Digital Output Gyroscope SPI driver"
depends on SPI depends on SPI
......
...@@ -8,6 +8,7 @@ obj-$(CONFIG_ADIS16080) += adis16080.o ...@@ -8,6 +8,7 @@ obj-$(CONFIG_ADIS16080) += adis16080.o
obj-$(CONFIG_ADIS16130) += adis16130.o obj-$(CONFIG_ADIS16130) += adis16130.o
obj-$(CONFIG_ADIS16136) += adis16136.o obj-$(CONFIG_ADIS16136) += adis16136.o
obj-$(CONFIG_ADIS16260) += adis16260.o obj-$(CONFIG_ADIS16260) += adis16260.o
obj-$(CONFIG_ADXRS290) += adxrs290.o
obj-$(CONFIG_ADXRS450) += adxrs450.o obj-$(CONFIG_ADXRS450) += adxrs450.o
obj-$(CONFIG_BMG160) += bmg160_core.o obj-$(CONFIG_BMG160) += bmg160_core.o
obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment