Commit 2c8c3416 authored by Jarkko Nikula's avatar Jarkko Nikula Committed by Lee Jones

mfd: lpss: Fix Intel Kaby Lake PCH-H properties

There are a few issues on Intel Kaby Lake PCH-H properties added by
commit a6a576b78e09 ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs"):

- Input clock of I2C controller on Intel Kaby Lake PCH-H is 120 MHz not
  133 MHz. This was probably copy-paste error from Intel Broxton I2C
  properties.
- There is no default I2C SDA hold time specified which is used when
  ACPI doesn't provide it. I got information from Windows driver team
  that Kaby Lake PCH-H can use the same configuration than Intel
  Sunrisepoint PCH.
- Common HS-UART properties are not used.

Fix these by reusing the Sunrisepoint properties on Kaby Lake PCH-H.

Fixes: a6a576b78e09 ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs")
Reported-by: default avatarXiang A Wang <xiang.a.wang@intel.com>
Signed-off-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 1001354c
......@@ -123,19 +123,6 @@ static const struct intel_lpss_platform_info apl_i2c_info = {
.properties = apl_i2c_properties,
};
static const struct intel_lpss_platform_info kbl_info = {
.clk_rate = 120000000,
};
static const struct intel_lpss_platform_info kbl_uart_info = {
.clk_rate = 120000000,
.clk_con_id = "baudclk",
};
static const struct intel_lpss_platform_info kbl_i2c_info = {
.clk_rate = 133000000,
};
static const struct pci_device_id intel_lpss_pci_ids[] = {
/* BXT A-Step */
{ PCI_VDEVICE(INTEL, 0x0aac), (kernel_ulong_t)&bxt_i2c_info },
......@@ -207,15 +194,15 @@ static const struct pci_device_id intel_lpss_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0xa161), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa166), (kernel_ulong_t)&spt_uart_info },
/* KBL-H */
{ PCI_VDEVICE(INTEL, 0xa2a7), (kernel_ulong_t)&kbl_uart_info },
{ PCI_VDEVICE(INTEL, 0xa2a8), (kernel_ulong_t)&kbl_uart_info },
{ PCI_VDEVICE(INTEL, 0xa2a9), (kernel_ulong_t)&kbl_info },
{ PCI_VDEVICE(INTEL, 0xa2aa), (kernel_ulong_t)&kbl_info },
{ PCI_VDEVICE(INTEL, 0xa2e0), (kernel_ulong_t)&kbl_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa2e1), (kernel_ulong_t)&kbl_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa2e2), (kernel_ulong_t)&kbl_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa2e3), (kernel_ulong_t)&kbl_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa2e6), (kernel_ulong_t)&kbl_uart_info },
{ PCI_VDEVICE(INTEL, 0xa2a7), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa2a8), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa2a9), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa2aa), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa2e0), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa2e1), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa2e2), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa2e3), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa2e6), (kernel_ulong_t)&spt_uart_info },
{ }
};
MODULE_DEVICE_TABLE(pci, intel_lpss_pci_ids);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment