Merge tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:

 - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
   interconnect, Unisoc/Spreadtrum SoCs and UART

 - Convert a bunch of Samsung bindings to DT schema

 - Convert a bunch of ST stm32 bindings to DT schema

 - Realtek and Exynos additions to Arm Mali bindings

 - Fix schema errors in RiscV CPU schema

 - Various schema fixes from improved meta-schema checks

 - Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges

 - Fix a memory leak in add_changeset_property() and DT unit tests.

 - Several documentation improvements for schema validation

 - Rework build rules to improve schema validation errors

 - Color output for dtx_diff

* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
  libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
  dt-bindings: arm: Remove leftover axentia.txt
  of: unittest: fix memory leak in attach_node_and_children
  of: overlay: add_changeset_property() memory leak
  dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
  dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
  dt-bindings: power: Rename back power_domain.txt bindings to fix references
  dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
  dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
  dt-bindings: remoteproc: convert stm32-rproc to json-schema
  dt-bindings: mailbox: convert stm32-ipcc to json-schema
  dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
  dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
  dt-bindings: rng: Convert stm32 RNG bindings to json-schema
  dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  dt-bindings: pwm: Convert PWM bindings to json-schema
  dt-bindings: serial: Add a new compatible string for SC9863A
  dt-bindings: serial: Convert sprd-uart to json-schema
  dt-bindings: arm: Add bindings for Unisoc SC9863A
  ...

Documentation/devicetree/bindings/Makefile

@@ -12,7 +12,6 @@ $(obj)/%.example.dts: $(src)/%.yaml FORCE
 	$(call if_changed,chk_binding)
 
 DT_TMP_SCHEMA := processed-schema.yaml
-extra-y += $(DT_TMP_SCHEMA)
 
 quiet_cmd_mk_schema = SCHEMA  $@
       cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs)
@@ -26,8 +25,12 @@ DT_DOCS = $(shell \
 
 DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS))
 
+ifeq ($(CHECK_DTBS),)
 extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
 extra-y += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+endif
 
 $(obj)/$(DT_TMP_SCHEMA): $(DT_SCHEMA_FILES) FORCE
 	$(call if_changed,mk_schema)
+
+extra-y += $(DT_TMP_SCHEMA)

Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt

-Amlogic Meson8 and Meson8b SRAM for smp bringup:
-------------------------------------------------
-
-Amlogic's SMP-capable SoCs use part of the sram for the bringup of the cores.
-Once the core gets powered up it executes the code that is residing at a
-specific location.
-
-Therefore a reserved section sub-node has to be added to the mmio-sram
-declaration.
-
-Required sub-node properties:
-- compatible : depending on the SoC this should be one of:
-		"amlogic,meson8-smp-sram"
-		"amlogic,meson8b-smp-sram"
-
-The rest of the properties should follow the generic mmio-sram discription
-found in ../../misc/sram.txt
-
-Example:
-
-	sram: sram@d9000000 {
-		compatible = "mmio-sram";
-		reg = <0xd9000000 0x20000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xd9000000 0x20000>;
-
-		smp-sram@1ff80 {
-			compatible = "amlogic,meson8b-smp-sram";
-			reg = <0x1ff80 0x8>;
-		};
-	};

Documentation/devicetree/bindings/arm/arm,scmi.txt

@@ -100,7 +100,7 @@ Required sub-node properties:
 
 [0] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/index.html
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/power/power_domain.txt
+[2] Documentation/devicetree/bindings/power/power-domain.yaml
 [3] Documentation/devicetree/bindings/thermal/thermal.txt
 [4] Documentation/devicetree/bindings/sram/sram.txt
 [5] Documentation/devicetree/bindings/reset/reset.txt

Documentation/devicetree/bindings/arm/arm,scpi.txt

@@ -110,7 +110,7 @@ Required properties:
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/thermal/thermal.txt
 [3] Documentation/devicetree/bindings/sram/sram.txt
-[4] Documentation/devicetree/bindings/power/power_domain.txt
+[4] Documentation/devicetree/bindings/power/power-domain.yaml
 
 Example:
 

Documentation/devicetree/bindings/arm/axentia.txt

-Device tree bindings for Axentia ARM devices
-============================================
-
-Linea CPU module
-----------------
-
-Required root node properties:
-compatible = "axentia,linea",
-	     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-and following the rules from atmel-at91.txt for a sama5d31 SoC.
-
-
-Nattis v2 board with Natte v2 power board
------------------------------------------
-
-Required root node properties:
-compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
-	     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-and following the rules from above for the axentia,linea CPU module.
-
-
-TSE-850 v3 board
-----------------
-
-Required root node properties:
-compatible = "axentia,tse850v3", "axentia,linea",
-	     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-and following the rules from above for the axentia,linea CPU module.

Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt

@@ -124,7 +124,7 @@ Required properties for Pinctrl sub nodes:
 			CONFIG settings.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/power/power_domain.txt
+[2] Documentation/devicetree/bindings/power/power-domain.yaml
 [3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
 
 RTC bindings based on SCU Message Protocol

Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt

-SAMSUNG Exynos SoCs Chipid driver.
-
-Required properties:
-- compatible : Should at least contain "samsung,exynos4210-chipid".
-
-- reg: offset and length of the register set
-
-Example:
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
-	};

Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/exynos-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series Chipid driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: samsung,exynos4210-chipid
+
+  reg:
+    maxItems: 1
+
+  samsung,asv-bin:
+    description:
+      Adaptive Supply Voltage bin selection. This can be used
+      to determine the ASV bin of an SoC if respective information
+      is missing in the CHIPID registers or in the OTP memory.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 0, 1, 2, 3 ]
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    chipid@10000000 {
+        compatible = "samsung,exynos4210-chipid";
+        reg = <0x10000000 0x100>;
+        samsung,asv-bin = <2>;
+    };

Documentation/devicetree/bindings/arm/samsung/pmu.txt

-SAMSUNG Exynos SoC series PMU Registers
-
-Properties:
- - compatible : should contain two values. First value must be one from following list:
-		   - "samsung,exynos3250-pmu" - for Exynos3250 SoC,
-		   - "samsung,exynos4210-pmu" - for Exynos4210 SoC,
-		   - "samsung,exynos4412-pmu" - for Exynos4412 SoC,
-		   - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
-		   - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
-		   - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
-		   - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
-		   - "samsung,exynos5433-pmu" - for Exynos5433 SoC.
-		   - "samsung,exynos7-pmu" - for Exynos7 SoC.
-		second value must be always "syscon".
-
- - reg : offset and length of the register set.
-
- - #clock-cells : must be <1>, since PMU requires once cell as clock specifier.
-		The single specifier cell is used as index to list of clocks
-		provided by PMU, which is currently:
-			0 : SoC clock output (CLKOUT pin)
-
- - clock-names : list of clock names for particular CLKOUT mux inputs in
-		following format:
-			"clkoutN", where N is a decimal number corresponding to
-			CLKOUT mux control bits value for given input, e.g.
-				"clkout0", "clkout7", "clkout15".
-
- - clocks : list of phandles and specifiers to all input clocks listed in
-		clock-names property.
-
-Optional properties:
-
-Some PMUs are capable of behaving as an interrupt controller (mostly
-to wake up a suspended PMU). In which case, they can have the
-following properties:
-
-- interrupt-controller: indicate that said PMU is an interrupt controller
-
-- #interrupt-cells: must be identical to the that of the parent interrupt
-  controller.
-
-
-Optional nodes:
-
-- nodes defining the restart and poweroff syscon children
-
-
-Example :
-pmu_system_controller: system-controller@10040000 {
-	compatible = "samsung,exynos5250-pmu", "syscon";
-	reg = <0x10040000 0x5000>;
-	interrupt-controller;
-	#interrupt-cells = <3>;
-	interrupt-parent = <&gic>;
-	#clock-cells = <1>;
-	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-			"clkout4", "clkout8", "clkout9";
-	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
-		<&clock CLK_XUSBXTI>;
-};
-
-Example of clock consumer :
-
-usb3503: usb3503@8 {
-	/* ... */
-	clock-names = "refclk";
-	clocks = <&pmu_system_controller 0>;
-	/* ... */
-};

Documentation/devicetree/bindings/arm/samsung/pmu.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series Power Management Unit (PMU)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+# Custom select to avoid matching all nodes with 'syscon'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - samsung,exynos3250-pmu
+          - samsung,exynos4210-pmu
+          - samsung,exynos4412-pmu
+          - samsung,exynos5250-pmu
+          - samsung,exynos5260-pmu
+          - samsung,exynos5410-pmu
+          - samsung,exynos5420-pmu
+          - samsung,exynos5433-pmu
+          - samsung,exynos7-pmu
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - samsung,exynos3250-pmu
+          - samsung,exynos4210-pmu
+          - samsung,exynos4412-pmu
+          - samsung,exynos5250-pmu
+          - samsung,exynos5260-pmu
+          - samsung,exynos5410-pmu
+          - samsung,exynos5420-pmu
+          - samsung,exynos5433-pmu
+          - samsung,exynos7-pmu
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clock-names:
+    description:
+      List of clock names for particular CLKOUT mux inputs
+    minItems: 1
+    maxItems: 32
+    items:
+      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
+
+  clocks:
+    minItems: 1
+    maxItems: 32
+
+  interrupt-controller:
+    description:
+      Some PMUs are capable of behaving as an interrupt controller (mostly
+      to wake up a suspended PMU).
+
+  '#interrupt-cells':
+    description:
+      Must be identical to the that of the parent interrupt controller.
+    const: 3
+
+  syscon-poweroff:
+    $ref: "../../power/reset/syscon-poweroff.yaml#"
+    type: object
+    description:
+      Node for power off method
+
+  syscon-reboot:
+    $ref: "../../power/reset/syscon-reboot.yaml#"
+    type: object
+    description:
+      Node for reboot method
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clock-names
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+
+    pmu_system_controller: system-controller@10040000 {
+        compatible = "samsung,exynos5250-pmu", "syscon";
+        reg = <0x10040000 0x5000>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+        interrupt-parent = <&gic>;
+        #clock-cells = <1>;
+        clock-names = "clkout16";
+        clocks = <&clock CLK_FIN_PLL>;
+    };

Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt

-* Samsung's Exynos and S5P SoC based boards
-
-Required root node properties:
-    - compatible = should be one or more of the following.
-	- "samsung,aries"	- for S5PV210-based Samsung Aries board.
-	- "samsung,fascinate4g"	- for S5PV210-based Samsung Galaxy S Fascinate 4G (SGH-T959P) board.
-	- "samsung,galaxys"	- for S5PV210-based Samsung Galaxy S (i9000)  board.
-	- "samsung,artik5"	- for Exynos3250-based Samsung ARTIK5 module.
-	- "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board.
-	- "samsung,monk"	- for Exynos3250-based Samsung Simband board.
-	- "samsung,rinato"	- for Exynos3250-based Samsung Gear2 board.
-	- "samsung,smdkv310"	- for Exynos4210-based Samsung SMDKV310 eval board.
-	- "samsung,trats"	- for Exynos4210-based Tizen Reference board.
-	- "samsung,universal_c210" - for Exynos4210-based Samsung board.
-	- "samsung,i9300"          - for Exynos4412-based Samsung GT-I9300 board.
-	- "samsung,i9305"          - for Exynos4412-based Samsung GT-I9305 board.
-	- "samsung,midas"       - for Exynos4412-based Samsung Midas board.
-	- "samsung,smdk4412",	- for Exynos4412-based Samsung SMDK4412 eval board.
-	- "samsung,n710x"          - for Exynos4412-based Samsung GT-N7100/GT-N7105 board.
-	- "samsung,trats2"	- for Exynos4412-based Tizen Reference board.
-	- "samsung,smdk5250"	- for Exynos5250-based Samsung SMDK5250 eval board.
-	- "samsung,xyref5260"	- for Exynos5260-based Samsung board.
-	- "samsung,smdk5410"	- for Exynos5410-based Samsung SMDK5410 eval board.
-	- "samsung,smdk5420"	- for Exynos5420-based Samsung SMDK5420 eval board.
-	- "samsung,tm2"		- for Exynos5433-based Samsung TM2 board.
-	- "samsung,tm2e"	- for Exynos5433-based Samsung TM2E board.
-
-* Other companies Exynos SoC based
-  * FriendlyARM
-	- "friendlyarm,tiny4412"  - for Exynos4412-based FriendlyARM
-				    TINY4412 board.
-  * TOPEET
-	- "topeet,itop4412-elite" - for Exynos4412-based TOPEET
-                                    Elite base board.
-
-  * Google
-	- "google,pi"		- for Exynos5800-based Google Peach Pi
-				  Rev 10+ board,
-	  also: "google,pi-rev16", "google,pi-rev15", "google,pi-rev14",
-		"google,pi-rev13", "google,pi-rev12", "google,pi-rev11",
-		"google,pi-rev10", "google,peach".
-
-	- "google,pit"		- for Exynos5420-based Google Peach Pit
-				  Rev 6+ (Exynos5420),
-	  also: "google,pit-rev16", "google,pit-rev15", "google,pit-rev14",
-		"google,pit-rev13", "google,pit-rev12", "google,pit-rev11",
-		"google,pit-rev10", "google,pit-rev9", "google,pit-rev8",
-		"google,pit-rev7", "google,pit-rev6", "google,peach".
-
-	- "google,snow-rev4"	- for Exynos5250-based Google Snow board,
-	  also: "google,snow"
-	- "google,snow-rev5"	- for Exynos5250-based Google Snow
-				  Rev 5+ board.
-	- "google,spring"	- for Exynos5250-based Google Spring board.
-
-  * Hardkernel
-	- "hardkernel,odroid-u3"  - for Exynos4412-based Hardkernel Odroid U3.
-	- "hardkernel,odroid-x"   - for Exynos4412-based Hardkernel Odroid X.
-	- "hardkernel,odroid-x2"  - for Exynos4412-based Hardkernel Odroid X2.
-	- "hardkernel,odroid-xu"  - for Exynos5410-based Hardkernel Odroid XU.
-	- "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3.
-	- "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel
-					 Odroid XU3 Lite board.
-	- "hardkernel,odroid-xu4" - for Exynos5422-based Hardkernel Odroid XU4.
-	- "hardkernel,odroid-hc1" - for Exynos5422-based Hardkernel Odroid HC1.
-
-  * Insignal
-	- "insignal,arndale"      - for Exynos5250-based Insignal Arndale board.
-	- "insignal,arndale-octa" - for Exynos5420-based Insignal Arndale
-				    Octa board.
-	- "insignal,origen"       - for Exynos4210-based Insignal Origen board.
-	- "insignal,origen4412"   - for Exynos4412-based Insignal Origen board.
-
-
-Optional nodes:
-    - firmware node, specifying presence and type of secure firmware:
-        - compatible: only "samsung,secure-firmware" is currently supported
-        - reg: address of non-secure SYSRAM used for communication with firmware
-
-	firmware@203f000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0203F000 0x1000>;
-	};

Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/samsung-boards.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos and S5P SoC based boards
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: S5PV210 based boards
+        items:
+          - enum:
+              - aesop,torbreck                  # aESOP Torbreck based on S5PV210
+              - samsung,aquila                  # Samsung Aquila based on S5PC110
+              - samsung,goni                    # Samsung Goni based on S5PC110
+              - yic,smdkc110                    # YIC System SMDKC110 based on S5PC110
+              - yic,smdkv210                    # YIC System SMDKV210 based on S5PV210
+          - const: samsung,s5pv210
+
+      - description: S5PV210 based Aries boards
+        items:
+          - enum:
+              - samsung,fascinate4g             # Samsung Galaxy S Fascinate 4G (SGH-T959P)
+              - samsung,galaxys                 # Samsung Galaxy S (i9000)
+          - const: samsung,aries
+          - const: samsung,s5pv210
+
+      - description: Exynos3250 based boards
+        items:
+          - enum:
+              - samsung,monk                    # Samsung Simband
+              - samsung,rinato                  # Samsung Gear2
+          - const: samsung,exynos3250
+          - const: samsung,exynos3
+
+      - description: Samsung ARTIK5 boards
+        items:
+          - enum:
+              - samsung,artik5-eval             # Samsung ARTIK5 eval board
+          - const: samsung,artik5               # Samsung ARTIK5 module
+          - const: samsung,exynos3250
+          - const: samsung,exynos3
+
+      - description: Exynos4210 based boards
+        items:
+          - enum:
+              - insignal,origen                 # Insignal Origen
+              - samsung,smdkv310                # Samsung SMDKV310 eval
+              - samsung,trats                   # Samsung Tizen Reference
+              - samsung,universal_c210          # Samsung C210
+          - const: samsung,exynos4210
+          - const: samsung,exynos4
+
+      - description: Exynos4412 based boards
+        items:
+          - enum:
+              - friendlyarm,tiny4412            # FriendlyARM TINY4412
+              - hardkernel,odroid-u3            # Hardkernel Odroid U3
+              - hardkernel,odroid-x             # Hardkernel Odroid X
+              - hardkernel,odroid-x2            # Hardkernel Odroid X2
+              - insignal,origen4412             # Insignal Origen
+              - samsung,smdk4412                # Samsung SMDK4412 eval
+              - topeet,itop4412-elite           # TOPEET Elite base
+          - const: samsung,exynos4412
+          - const: samsung,exynos4
+
+      - description: Samsung Midas family boards
+        items:
+          - enum:
+              - samsung,i9300                   # Samsung GT-I9300
+              - samsung,i9305                   # Samsung GT-I9305
+              - samsung,n710x                   # Samsung GT-N7100/GT-N7105
+              - samsung,trats2                  # Samsung Tizen Reference
+          - const: samsung,midas
+          - const: samsung,exynos4412
+          - const: samsung,exynos4
+
+      - description: Exynos5250 based boards
+        items:
+          - enum:
+              - google,snow-rev5                # Google Snow Rev 5+
+              - google,spring                   # Google Spring
+              - insignal,arndale                # Insignal Arndale
+              - samsung,smdk5250                # Samsung SMDK5250 eval
+          - const: samsung,exynos5250
+          - const: samsung,exynos5
+
+      - description: Google Snow Boards (Rev 4+)
+        items:
+          - const: google,snow-rev4
+          - const: google,snow
+          - const: samsung,exynos5250
+          - const: samsung,exynos5
+
+      - description: Exynos5260 based boards
+        items:
+          - enum:
+              - samsung,xyref5260               # Samsung Xyref5260 eval
+          - const: samsung,exynos5260
+          - const: samsung,exynos5
+
+      - description: Exynos5410 based boards
+        items:
+          - enum:
+              - hardkernel,odroid-xu            # Hardkernel Odroid XU
+              - samsung,smdk5410                # Samsung SMDK5410 eval
+          - const: samsung,exynos5410
+          - const: samsung,exynos5
+
+      - description: Exynos5420 based boards
+        items:
+          - enum:
+              - insignal,arndale-octa           # Insignal Arndale Octa
+              - samsung,smdk5420                # Samsung SMDK5420 eval
+          - const: samsung,exynos5420
+          - const: samsung,exynos5
+
+      - description: Google Peach Pit Boards (Rev 6+)
+        items:
+          - const: google,pit-rev16
+          - const: google,pit-rev15
+          - const: google,pit-rev14
+          - const: google,pit-rev13
+          - const: google,pit-rev12
+          - const: google,pit-rev11
+          - const: google,pit-rev10
+          - const: google,pit-rev9
+          - const: google,pit-rev8
+          - const: google,pit-rev7
+          - const: google,pit-rev6
+          - const: google,pit
+          - const: google,peach
+          - const: samsung,exynos5420
+          - const: samsung,exynos5
+
+      - description: Exynos5800 based boards
+        items:
+          - enum:
+              - hardkernel,odroid-xu3           # Hardkernel Odroid XU3
+              - hardkernel,odroid-xu3-lite      # Hardkernel Odroid XU3 Lite
+              - hardkernel,odroid-xu4           # Hardkernel Odroid XU4
+              - hardkernel,odroid-hc1           # Hardkernel Odroid HC1
+          - const: samsung,exynos5800
+          - const: samsung,exynos5
+
+      - description: Google Peach Pi Boards (Rev 10+)
+        items:
+          - const: google,pi-rev16
+          - const: google,pi-rev15
+          - const: google,pi-rev14
+          - const: google,pi-rev13
+          - const: google,pi-rev12
+          - const: google,pi-rev11
+          - const: google,pi-rev10
+          - const: google,pi
+          - const: google,peach
+          - const: samsung,exynos5800
+          - const: samsung,exynos5
+
+      - description: Exynos5433 based boards
+        items:
+          - enum:
+              - samsung,tm2                     # Samsung TM2
+              - samsung,tm2e                    # Samsung TM2E
+          - const: samsung,exynos5433
+
+      - description: Exynos7 based boards
+        items:
+          - enum:
+              - samsung,exynos7-espresso        # Samsung Exynos7 Espresso
+          - const: samsung,exynos7
+
+required:
+  - compatible

Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/samsung-secure-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Secure Firmware
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: samsung,secure-firmware
+
+  reg:
+    description:
+      Address of non-secure SYSRAM used for communication with firmware.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    firmware@203f000 {
+      compatible = "samsung,secure-firmware";
+      reg = <0x0203f000 0x1000>;
+    };

Documentation/devicetree/bindings/arm/samsung/sysreg.txt

-SAMSUNG S5P/Exynos SoC series System Registers (SYSREG)
-
-Properties:
- - compatible : should contain two values. First value must be one from following list:
-		- "samsung,exynos4-sysreg" - for Exynos4 based SoCs,
-		- "samsung,exynos5-sysreg" - for Exynos5 based SoCs.
-		second value must be always "syscon".
- - reg : offset and length of the register set.
-
-Example:
-	syscon@10010000 {
-		compatible = "samsung,exynos4-sysreg", "syscon";
-		reg = <0x10010000 0x400>;
-	};
-
-	syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};

Documentation/devicetree/bindings/arm/samsung/sysreg.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC series System Registers (SYSREG)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+# Custom select to avoid matching all nodes with 'syscon'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - samsung,exynos4-sysreg
+          - samsung,exynos5-sysreg
+  required:
+    - compatible
+
+properties:
+  compatible:
+    allOf:
+      - items:
+          - enum:
+              - samsung,exynos4-sysreg
+              - samsung,exynos5-sysreg
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+examples:
+  - |
+    syscon@10010000 {
+        compatible = "samsung,exynos4-sysreg", "syscon";
+        reg = <0x10010000 0x400>;
+    };
+
+    syscon@10050000 {
+        compatible = "samsung,exynos5-sysreg", "syscon";
+        reg = <0x10050000 0x5000>;
+    };

Documentation/devicetree/bindings/arm/sprd.txt

-Spreadtrum SoC Platforms Device Tree Bindings
-----------------------------------------------------
-
-SC9836 openphone Board
-Required root node properties:
-	- compatible = "sprd,sc9836-openphone", "sprd,sc9836";
-
-SC9860 SoC
-Required root node properties:
-	- compatible = "sprd,sc9860"
-
-SP9860G 3GFHD Board
-Required root node properties:
-	- compatible = "sprd,sp9860g-1h10", "sprd,sc9860";

Documentation/devicetree/bindings/arm/sprd.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sprd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc platforms device tree bindings
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sprd,sc9836-openphone
+          - const: sprd,sc9836
+      - items:
+          - enum:
+              - sprd,sp9860g-1h10
+          - const: sprd,sc9860
+      - items:
+          - enum:
+              - sprd,sp9863a-1h10
+          - const: sprd,sc9863a
+
+...

Documentation/devicetree/bindings/arm/stm32/stm32.yaml

@@ -13,19 +13,38 @@ properties:
   compatible:
     oneOf:
       - items:
+          - enum:
+              - st,stm32f429i-disco
+              - st,stm32429i-eval
           - const: st,stm32f429
-
       - items:
+          - enum:
+              - st,stm32f469i-disco
           - const: st,stm32f469
-
       - items:
+          - enum:
+              - st,stm32f746-disco
+              - st,stm32746g-eval
           - const: st,stm32f746
-
       - items:
+          - enum:
+              - st,stm32f769-disco
+          - const: st,stm32f769
+      - items:
+          - enum:
+              - st,stm32h743i-disco
+              - st,stm32h743i-eval
           - const: st,stm32h743
-
       - items:
           - enum:
               - arrow,stm32mp157a-avenger96 # Avenger96
+              - st,stm32mp157c-ed1
+              - st,stm32mp157a-dk1
+              - st,stm32mp157c-dk2
+
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-ev1
+          - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
 ...

Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt

-Allwinner SRAM for smp bringup:
-------------------------------------------------
-
-Allwinner's A80 SoC uses part of the secure sram for hotplugging of the
-primary core (cpu0). Once the core gets powered up it checks if a magic
-value is set at a specific location. If it is then the BROM will jump
-to the software entry address, instead of executing a standard boot.
-
-Therefore a reserved section sub-node has to be added to the mmio-sram
-declaration.
-
-Note that this is separate from the Allwinner SRAM controller found in
-../../sram/sunxi-sram.txt. This SRAM is secure only and not mappable to
-any device.
-
-Also there are no "secure-only" properties. The implementation should
-check if this SRAM is usable first.
-
-Required sub-node properties:
-- compatible : depending on the SoC this should be one of:
-		"allwinner,sun9i-a80-smp-sram"
-
-The rest of the properties should follow the generic mmio-sram discription
-found in ../../misc/sram.txt
-
-Example:
-
-	sram_b: sram@20000 {
-		/* 256 KiB secure SRAM at 0x20000 */
-		compatible = "mmio-sram";
-		reg = <0x00020000 0x40000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x00020000 0x40000>;
-
-		smp-sram@1000 {
-			/*
-			 * This is checked by BROM to determine if
-			 * cpu0 should jump to SMP entry vector
-			 */
-			compatible = "allwinner,sun9i-a80-smp-sram";
-			reg = <0x1000 0x8>;
-		};
-	};

Documentation/devicetree/bindings/ata/sata_rcar.txt

@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible		: should contain one or more of the following:
+			  - "renesas,sata-r8a774b1" for RZ/G2N
 			  - "renesas,sata-r8a7779" for R-Car H1
 			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
 			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
@@ -9,8 +10,10 @@ Required properties:
 			  - "renesas,sata-r8a7793" for R-Car M2-N
 			  - "renesas,sata-r8a7795" for R-Car H3
 			  - "renesas,sata-r8a77965" for R-Car M3-N
-			  - "renesas,rcar-gen2-sata" for a generic R-Car Gen2 compatible device
-			  - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 compatible device
+			  - "renesas,rcar-gen2-sata" for a generic R-Car Gen2
+			     compatible device
+			  - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 or
+			     RZ/G2 compatible device
 			  - "renesas,rcar-sata" is deprecated
 
 			  When compatible with the generic version nodes

Documentation/devicetree/bindings/bus/renesas,bsc.txt

-Renesas Bus State Controller (BSC)
-==================================
-
-The Renesas Bus State Controller (BSC, sometimes called "LBSC within Bus
-Bridge", or "External Bus Interface") can be found in several Renesas ARM SoCs.
-It provides an external bus for connecting multiple external devices to the
-SoC, driving several chip select lines, for e.g. NOR FLASH, Ethernet and USB.
-
-While the BSC is a fairly simple memory-mapped bus, it may be part of a PM
-domain, and may have a gateable functional clock.
-Before a device connected to the BSC can be accessed, the PM domain
-containing the BSC must be powered on, and the functional clock
-driving the BSC must be enabled.
-
-The bindings for the BSC extend the bindings for "simple-pm-bus".
-
-
-Required properties
-  - compatible: Must contain an SoC-specific value, and "renesas,bsc" and
-		"simple-pm-bus" as fallbacks.
-                SoC-specific values can be:
-		"renesas,bsc-r8a73a4" for R-Mobile APE6 (r8a73a4)
-		"renesas,bsc-sh73a0" for SH-Mobile AG5 (sh73a0)
-  - #address-cells, #size-cells, ranges: Must describe the mapping between
-		parent address and child address spaces.
-  - reg: Must contain the base address and length to access the bus controller.
-
-Optional properties:
-  - interrupts: Must contain a reference to the BSC interrupt, if available.
-  - clocks: Must contain a reference to the functional clock, if available.
-  - power-domains: Must contain a reference to the PM domain, if available.
-
-
-Example:
-
-	bsc: bus@fec10000 {
-		compatible = "renesas,bsc-sh73a0", "renesas,bsc",
-			     "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0x20000000>;
-		reg = <0xfec10000 0x400>;
-		interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&zb_clk>;
-		power-domains = <&pd_a4s>;
-	};

Documentation/devicetree/bindings/bus/renesas,bsc.yaml

+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/renesas,bsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Bus State Controller (BSC)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  The Renesas Bus State Controller (BSC, sometimes called "LBSC within Bus
+  Bridge", or "External Bus Interface") can be found in several Renesas ARM
+  SoCs.  It provides an external bus for connecting multiple external
+  devices to the SoC, driving several chip select lines, for e.g. NOR
+  FLASH, Ethernet and USB.
+
+  While the BSC is a fairly simple memory-mapped bus, it may be part of a
+  PM domain, and may have a gateable functional clock.  Before a device
+  connected to the BSC can be accessed, the PM domain containing the BSC
+  must be powered on, and the functional clock driving the BSC must be
+  enabled.
+
+  The bindings for the BSC extend the bindings for "simple-pm-bus".
+
+allOf:
+  - $ref: simple-pm-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,bsc-r8a73a4  # R-Mobile APE6 (r8a73a4)
+          - renesas,bsc-sh73a0   # SH-Mobile AG5 (sh73a0)
+      - const: renesas,bsc
+      - {} # simple-pm-bus, but not listed here to avoid false select
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bsc: bus@fec10000 {
+        compatible = "renesas,bsc-sh73a0", "renesas,bsc", "simple-pm-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0 0x20000000>;
+        reg = <0xfec10000 0x400>;
+        interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&zb_clk>;
+        power-domains = <&pd_a4s>;
+    };

Documentation/devicetree/bindings/bus/simple-pm-bus.txt

-Simple Power-Managed Bus
-========================
-
-A Simple Power-Managed Bus is a transparent bus that doesn't need a real
-driver, as it's typically initialized by the boot loader.
-
-However, its bus controller is part of a PM domain, or under the control of a
-functional clock.  Hence, the bus controller's PM domain and/or clock must be
-enabled for child devices connected to the bus (either on-SoC or externally)
-to function.
-
-While "simple-pm-bus" follows the "simple-bus" set of properties, as specified
-in the Devicetree Specification, it is not an extension of "simple-bus".
-
-
-Required properties:
-  - compatible: Must contain at least "simple-pm-bus".
-		Must not contain "simple-bus".
-		It's recommended to let this be preceded by one or more
-		vendor-specific compatible values.
-  - #address-cells, #size-cells, ranges: Must describe the mapping between
-		parent address and child address spaces.
-
-Optional platform-specific properties for clock or PM domain control (at least
-one of them is required):
-  - clocks: Must contain a reference to the functional clock(s),
-  - power-domains: Must contain a reference to the PM domain.
-Please refer to the binding documentation for the clock and/or PM domain
-providers for more details.
-
-
-Example:
-
-	bsc: bus@fec10000 {
-		compatible = "renesas,bsc-sh73a0", "renesas,bsc",
-			     "simple-pm-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0x20000000>;
-		reg = <0xfec10000 0x400>;
-		interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&zb_clk>;
-		power-domains = <&pd_a4s>;
-	};

Documentation/devicetree/bindings/bus/simple-pm-bus.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Power-Managed Bus
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  A Simple Power-Managed Bus is a transparent bus that doesn't need a real
+  driver, as it's typically initialized by the boot loader.
+
+  However, its bus controller is part of a PM domain, or under the control
+  of a functional clock.  Hence, the bus controller's PM domain and/or
+  clock must be enabled for child devices connected to the bus (either
+  on-SoC or externally) to function.
+
+  While "simple-pm-bus" follows the "simple-bus" set of properties, as
+  specified in the Devicetree Specification, it is not an extension of
+  "simple-bus".
+
+properties:
+  $nodename:
+    pattern: "^bus(@[0-9a-f]+)?$"
+
+  compatible:
+    contains:
+      const: simple-pm-bus
+    description:
+      Shall contain "simple-pm-bus" in addition to a optional bus-specific
+      compatible strings defined in individual pm-bus bindings.
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks: true
+    # Functional clocks
+    # Required if power-domains is absent, optional otherwise
+
+  power-domains:
+    # Required if clocks is absent, optional otherwise
+    minItems: 1
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+
+anyOf:
+  - required:
+      - clocks
+  - required:
+      - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bus {
+        power-domains = <&gcc AGGRE0_NOC_GDSC>;
+        compatible = "simple-pm-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+    };

Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt

@@ -62,7 +62,7 @@ Required Properties:
 	power-managed through Module Standby should refer to the CPG device
 	node in their "power-domains" property, as documented by the generic PM
 	Domain bindings in
-	Documentation/devicetree/bindings/power/power_domain.txt.
+	Documentation/devicetree/bindings/power/power-domain.yaml.
 
   - #reset-cells: Must be 1
       - The single reset specifier cell must be the module number, as defined

Documentation/devicetree/bindings/clock/ti/davinci/psc.txt

@@ -67,5 +67,5 @@ Examples:
 
 Also see:
 - Documentation/devicetree/bindings/clock/clock-bindings.txt
-- Documentation/devicetree/bindings/power/power_domain.txt
+- Documentation/devicetree/bindings/power/power-domain.yaml
 - Documentation/devicetree/bindings/reset/reset.txt

Documentation/devicetree/bindings/counter/stm32-lptimer-cnt.txt

-STMicroelectronics STM32 Low-Power Timer quadrature encoder and counter
-
-STM32 Low-Power Timer provides several counter modes. It can be used as:
-- quadrature encoder to detect angular position and direction of rotary
-  elements, from IN1 and IN2 input signals.
-- simple counter from IN1 input signal.
-
-Must be a sub-node of an STM32 Low-Power Timer device tree node.
-See ../mfd/stm32-lptimer.txt for details about the parent node.
-
-Required properties:
-- compatible:		Must be "st,stm32-lptimer-counter".
-- pinctrl-names: 	Set to "default". An additional "sleep" state can be
-			defined to set pins in sleep state.
-- pinctrl-n: 		List of phandles pointing to pin configuration nodes,
-			to set IN1/IN2 pins in mode of operation for Low-Power
-			Timer input on external pin.
-
-Example:
-	timer@40002400 {
-		compatible = "st,stm32-lptimer";
-		...
-		counter {
-			compatible = "st,stm32-lptimer-counter";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&lptim1_in_pins>;
-			pinctrl-1 = <&lptim1_sleep_in_pins>;
-		};
-	};

Documentation/devicetree/bindings/counter/stm32-timer-cnt.txt

-STMicroelectronics STM32 Timer quadrature encoder
-
-STM32 Timer provides quadrature encoder to detect
-angular position and direction of rotary elements,
-from IN1 and IN2 input signals.
-
-Must be a sub-node of an STM32 Timer device tree node.
-See ../mfd/stm32-timers.txt for details about the parent node.
-
-Required properties:
-- compatible:		Must be "st,stm32-timer-counter".
-- pinctrl-names: 	Set to "default".
-- pinctrl-0: 		List of phandles pointing to pin configuration nodes,
-			to set CH1/CH2 pins in mode of operation for STM32
-			Timer input on external pin.
-
-Example:
-	timers@40010000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "st,stm32-timers";
-		reg = <0x40010000 0x400>;
-		clocks = <&rcc 0 160>;
-		clock-names = "int";
-
-		counter {
-			compatible = "st,stm32-timer-counter";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tim1_in_pins>;
-		};
-	};

Documentation/devicetree/bindings/crypto/samsung-slimsss.txt

-Samsung SoC SlimSSS (Slim Security SubSystem) module
-
-The SlimSSS module in Exynos5433 SoC supports the following:
--- Feeder (FeedCtrl)
--- Advanced Encryption Standard (AES) with ECB,CBC,CTR,XTS and (CBC/XTS)/CTS
--- SHA-1/SHA-256 and (SHA-1/SHA-256)/HMAC
-
-Required properties:
-
-- compatible : Should contain entry for slimSSS version:
-  - "samsung,exynos5433-slim-sss" for Exynos5433 SoC.
-- reg : Offset and length of the register set for the module
-- interrupts : interrupt specifiers of SlimSSS module interrupts (one feed
-		control interrupt).
-
-- clocks : list of clock phandle and specifier pairs for all clocks listed in
-		clock-names property.
-- clock-names : list of device clock input names; should contain "pclk" and
-		"aclk" for slim-sss in Exynos5433.

Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/samsung-slimsss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC SlimSSS (Slim Security SubSystem) module
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Kamil Konieczny <k.konieczny@partner.samsung.com>
+
+description: |+
+  The SlimSSS module in Exynos5433 SoC supports the following:
+  -- Feeder (FeedCtrl)
+  -- Advanced Encryption Standard (AES) with ECB,CBC,CTR,XTS and (CBC/XTS)/CTS
+  -- SHA-1/SHA-256 and (SHA-1/SHA-256)/HMAC
+
+properties:
+  compatible:
+    items:
+      - const: samsung,exynos5433-slim-ss
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk
+
+  interrupts:
+    description: One feed control interrupt.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - interrupts
+
+additionalProperties: false

Documentation/devicetree/bindings/crypto/samsung-sss.txt

-Samsung SoC SSS (Security SubSystem) module
-
-The SSS module in S5PV210 SoC supports the following:
--- Feeder (FeedCtrl)
--- Advanced Encryption Standard (AES)
--- Data Encryption Standard (DES)/3DES
--- Public Key Accelerator (PKA)
--- SHA-1/SHA-256/MD5/HMAC (SHA-1/SHA-256/MD5)/PRNG
--- PRNG: Pseudo Random Number Generator
-
-The SSS module in Exynos4 (Exynos4210) and
-Exynos5 (Exynos5420 and Exynos5250) SoCs
-supports the following also:
--- ARCFOUR (ARC4)
--- True Random Number Generator (TRNG)
--- Secure Key Manager
-
-Required properties:
-
-- compatible : Should contain entries for this and backward compatible
-  SSS versions:
-  - "samsung,s5pv210-secss" for S5PV210 SoC.
-  - "samsung,exynos4210-secss" for Exynos4210, Exynos4212, Exynos4412, Exynos5250,
-		Exynos5260 and Exynos5420 SoCs.
-- reg : Offset and length of the register set for the module
-- interrupts : interrupt specifiers of SSS module interrupts (one feed
-		control interrupt).
-
-- clocks : list of clock phandle and specifier pairs for all clocks  listed in
-		clock-names property.
-- clock-names : list of device clock input names; should contain one entry
-		"secss".

Documentation/devicetree/bindings/crypto/samsung-sss.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/samsung-sss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC SSS (Security SubSystem) module
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Kamil Konieczny <k.konieczny@partner.samsung.com>
+
+description: |+
+  The SSS module in S5PV210 SoC supports the following:
+  -- Feeder (FeedCtrl)
+  -- Advanced Encryption Standard (AES)
+  -- Data Encryption Standard (DES)/3DES
+  -- Public Key Accelerator (PKA)
+  -- SHA-1/SHA-256/MD5/HMAC (SHA-1/SHA-256/MD5)/PRNG
+  -- PRNG: Pseudo Random Number Generator
+
+  The SSS module in Exynos4 (Exynos4210) and Exynos5 (Exynos5420 and Exynos5250)
+  SoCs supports the following also:
+  -- ARCFOUR (ARC4)
+  -- True Random Number Generator (TRNG)
+  -- Secure Key Manager
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - samsung,s5pv210-secss           # for S5PV210
+          - samsung,exynos4210-secss        # for Exynos4210, Exynos4212,
+                                            # Exynos4412, Exynos5250,
+                                            # Exynos5260 and Exynos5420
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: secss
+
+  interrupts:
+    description: One feed control interrupt.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - interrupts
+
+additionalProperties: false

Documentation/devicetree/bindings/crypto/st,stm32-crc.txt

-* STMicroelectronics STM32 CRC
-
-Required properties:
-- compatible: Should be "st,stm32f7-crc".
-- reg: The address and length of the peripheral registers space
-- clocks: The input clock of the CRC instance
-
-Optional properties: none
-
-Example:
-
-crc: crc@40023000 {
-	compatible = "st,stm32f7-crc";
-	reg = <0x40023000 0x400>;
-	clocks = <&rcc 0 12>;
-};

Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/st,stm32-crc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 CRC bindings
+
+maintainers:
+  - Lionel Debieve <lionel.debieve@st.com>
+
+properties:
+  compatible:
+    const: st,stm32f7-crc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    crc@40023000 {
+      compatible = "st,stm32f7-crc";
+      reg = <0x40023000 0x400>;
+      clocks = <&rcc 0 12>;
+    };
+
+...

Documentation/devicetree/bindings/crypto/st,stm32-cryp.txt

-* STMicroelectronics STM32 CRYP
-
-Required properties:
-- compatible: Should be "st,stm32f756-cryp".
-- reg: The address and length of the peripheral registers space
-- clocks: The input clock of the CRYP instance
-- interrupts: The CRYP interrupt
-
-Optional properties:
-- resets: The input reset of the CRYP instance
-
-Example:
-crypto@50060000 {
-	compatible = "st,stm32f756-cryp";
-	reg = <0x50060000 0x400>;
-	interrupts = <79>;
-	clocks = <&rcc 0 STM32F7_AHB2_CLOCK(CRYP)>;
-	resets = <&rcc STM32F7_AHB2_RESET(CRYP)>;
-};

Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/st,stm32-cryp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 CRYP bindings
+
+maintainers:
+  - Lionel Debieve <lionel.debieve@st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f756-cryp
+      - st,stm32mp1-cryp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    cryp@54001000 {
+      compatible = "st,stm32mp1-cryp";
+      reg = <0x54001000 0x400>;
+      interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&rcc CRYP1>;
+      resets = <&rcc CRYP1_R>;
+    };
+
+...

Documentation/devicetree/bindings/crypto/st,stm32-hash.txt

-* STMicroelectronics STM32 HASH
-
-Required properties:
-- compatible: Should contain entries for this and backward compatible
-  HASH versions:
-  - "st,stm32f456-hash" for stm32 F456.
-  - "st,stm32f756-hash" for stm32 F756.
-- reg: The address and length of the peripheral registers space
-- interrupts: the interrupt specifier for the HASH
-- clocks: The input clock of the HASH instance
-
-Optional properties:
-- resets: The input reset of the HASH instance
-- dmas: DMA specifiers for the HASH. See the DMA client binding,
-	 Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request name. Should be "in" if a dma is present.
-- dma-maxburst: Set number of maximum dma burst supported
-
-Example:
-
-hash1: hash@50060400 {
-	compatible = "st,stm32f756-hash";
-	reg = <0x50060400 0x400>;
-	interrupts = <80>;
-	clocks = <&rcc 0 STM32F7_AHB2_CLOCK(HASH)>;
-	resets = <&rcc STM32F7_AHB2_RESET(HASH)>;
-	dmas = <&dma2 7 2 0x400 0x0>;
-	dma-names = "in";
-	dma-maxburst = <0>;
-};

Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/st,stm32-hash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 HASH bindings
+
+maintainers:
+  - Lionel Debieve <lionel.debieve@st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f456-hash
+      - st,stm32f756-hash
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: in
+
+  dma-maxburst:
+    description: Set number of maximum dma burst supported
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 2
+      - default: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    hash@54002000 {
+      compatible = "st,stm32f756-hash";
+      reg = <0x54002000 0x400>;
+      interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&rcc HASH1>;
+      resets = <&rcc HASH1_R>;
+      dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>;
+      dma-names = "in";
+      dma-maxburst = <2>;
+    };
+
+...

Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml

@@ -79,8 +79,6 @@ properties:
 
   hdmi-supply:
     description: phandle to an external 5V regulator to power the HDMI logic
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
 
   port@0:
     type: object

Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt

@@ -21,7 +21,7 @@ Optional properties:
 - #gpio-cells    : Should be two. The first cell is the pin number and
                    the second cell is used to specify flags.
                    See ../../gpio/gpio.txt for more information.
-- #pwm-cells : Should be one. See ../../pwm/pwm.txt for description of
+- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of
                the cell formats.
 
 - clock-names: should be "refclk"

Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt

@@ -27,11 +27,11 @@ Example:
 
 	display: display {
 		model = "320x240x4";
-		native-mode = <&timing0>;
 		bits-per-pixel = <4>;
 		ac-prescale = <17>;
 
 		display-timings {
+			native-mode = <&timing0>;
 			timing0: 320x240 {
 				hactive = <320>;
 				hback-porch = <0>;

Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt

@@ -38,10 +38,10 @@ Example:
 
 	display0: display0 {
 		model = "Primeview-PD050VL1";
-		native-mode = <&timing_disp0>;
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
+			native-mode = <&timing_disp0>;
 			timing_disp0: 640x480 {
 				hactive = <640>;
 				vactive = <480>;

Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt

-Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
-
-Required properties:
-- compatible: should be "sharp,ld-d5116z01b"
-- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
-
-This binding is compatible with the simple-panel binding.
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [1]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	panel: panel {
-		compatible = "sharp,ld-d5116z01b";
-		power-supply = <&vlcd_3v3>;
-
-		port {
-			panel_ep: endpoint {
-				remote-endpoint = <&bridge_out_ep>;
-			};
-		};
-	};

Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ld-d5116z01b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
+
+maintainers:
+  - Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,ld-d5116z01b
+
+  power-supply: true
+  backlight: true
+  port: true
+  no-hpd: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+...

Documentation/devicetree/bindings/display/st,stm32-dsi.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DSI host controller
+
+maintainers:
+  - Philippe Cornu <philippe.cornu@st.com>
+  - Yannick Fertre <yannick.fertre@st.com>
+
+description:
+  The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller.
+
+properties:
+  compatible:
+    const: st,stm32-dsi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Module Clock
+      - description: DSI bus clock
+      - description: Pixel clock
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: ref
+      - const: px_clk
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: apb
+
+  phy-dsi-supply:
+    description:
+        Phandle of the regulator that provides the supply voltage.
+
+  ports:
+    type: object
+    description:
+      A node containing DSI input & output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+      Documentation/devicetree/bindings/graph.txt
+    properties:
+      port@0:
+        type: object
+        description:
+          DSI input port node, connected to the ltdc rgb output port.
+
+      port@1:
+        type: object
+        description:
+          DSI output port node, connected to a panel or a bridge input port"
+
+patternProperties:
+  "^(panel|panel-dsi)@[0-9]$":
+    type: object
+    description:
+      A node containing the panel or bridge description as documented in
+      Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+    properties:
+      port:
+        type: object
+        description:
+          Panel or bridge port node, connected to the DSI output port (port@1)
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    #include <dt-bindings/gpio/gpio.h>
+    dsi: dsi@5a000000 {
+        compatible = "st,stm32-dsi";
+        reg = <0x5a000000 0x800>;
+        clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+        clock-names = "pclk", "ref", "px_clk";
+        resets = <&rcc DSI_R>;
+        reset-names = "apb";
+        phy-dsi-supply = <&reg18>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                    reg = <0>;
+                    dsi_in: endpoint {
+                        remote-endpoint = <&ltdc_ep1_out>;
+                    };
+              };
+
+              port@1 {
+                    reg = <1>;
+                    dsi_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+              };
+        };
+
+        panel-dsi@0 {
+              compatible = "orisetech,otm8009a";
+              reg = <0>;
+              reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+              power-supply = <&v3v3>;
+
+              port {
+                    panel_in: endpoint {
+                        remote-endpoint = <&dsi_out>;
+                    };
+              };
+        };
+    };
+
+...
+
+

Documentation/devicetree/bindings/display/st,stm32-ltdc.txt

-* STMicroelectronics STM32 lcd-tft display controller
-
-- ltdc: lcd-tft display controller host
-  Required properties:
-  - compatible: "st,stm32-ltdc"
-  - reg: Physical base address of the IP registers and length of memory mapped region.
-  - clocks: A list of phandle + clock-specifier pairs, one for each
-    entry in 'clock-names'.
-  - clock-names: A list of clock names. For ltdc it should contain:
-      - "lcd" for the clock feeding the output pixel clock & IP clock.
-  - resets: reset to be used by the device (defined by use of RCC macro).
-  Required nodes:
-  - Video port for DPI RGB output: ltdc has one video port with up to 2
-    endpoints:
-      - for external dpi rgb panel or bridge, using gpios.
-      - for internal dpi input of the MIPI DSI host controller.
-      Note: These 2 endpoints cannot be activated simultaneously.
-
-* STMicroelectronics STM32 DSI controller specific extensions to Synopsys
-  DesignWare MIPI DSI host controller
-
-The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI
-DSI host controller. For all mandatory properties & nodes, please refer
-to the related documentation in [5].
-
-Mandatory properties specific to STM32 DSI:
-- #address-cells: Should be <1>.
-- #size-cells: Should be <0>.
-- compatible: "st,stm32-dsi".
-- clock-names:
-  - phy pll reference clock string name, must be "ref".
-- resets: see [5].
-- reset-names: see [5].
-
-Mandatory nodes specific to STM32 DSI:
-- ports: A node containing DSI input & output port nodes with endpoint
-  definitions as documented in [3] & [4].
-  - port@0: DSI input port node, connected to the ltdc rgb output port.
-  - port@1: DSI output port node, connected to a panel or a bridge input port.
-- panel or bridge node: A node containing the panel or bridge description as
-  documented in [6].
-  - port: panel or bridge port node, connected to the DSI output port (port@1).
-Optional properties:
-- phy-dsi-supply: phandle of the regulator that provides the supply voltage.
-
-Note: You can find more documentation in the following references
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/reset/reset.txt
-[3] Documentation/devicetree/bindings/media/video-interfaces.txt
-[4] Documentation/devicetree/bindings/graph.txt
-[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
-[6] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
-
-Example 1: RGB panel
-/ {
-	...
-	soc {
-	...
-		ltdc: display-controller@40016800 {
-			compatible = "st,stm32-ltdc";
-			reg = <0x40016800 0x200>;
-			interrupts = <88>, <89>;
-			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
-			clocks = <&rcc 1 CLK_LCD>;
-			clock-names = "lcd";
-
-			port {
-				ltdc_out_rgb: endpoint {
-				};
-			};
-		};
-	};
-};
-
-Example 2: DSI panel
-
-/ {
-	...
-	soc {
-	...
-		ltdc: display-controller@40016800 {
-			compatible = "st,stm32-ltdc";
-			reg = <0x40016800 0x200>;
-			interrupts = <88>, <89>;
-			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
-			clocks = <&rcc 1 CLK_LCD>;
-			clock-names = "lcd";
-
-			port {
-				ltdc_out_dsi: endpoint {
-					remote-endpoint = <&dsi_in>;
-				};
-			};
-		};
-
-
-		dsi: dsi@40016c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-dsi";
-			reg = <0x40016c00 0x800>;
-			clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
-			clock-names = "pclk", "ref";
-			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
-			reset-names = "apb";
-			phy-dsi-supply = <&reg18>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					dsi_in: endpoint {
-						remote-endpoint = <&ltdc_out_dsi>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					dsi_out: endpoint {
-						remote-endpoint = <&dsi_in_panel>;
-					};
-				};
-
-			};
-
-			panel-dsi@0 {
-				reg = <0>; /* dsi virtual channel (0..3) */
-				compatible = ...;
-				enable-gpios = ...;
-
-				port {
-					dsi_in_panel: endpoint {
-						remote-endpoint = <&dsi_out>;
-					};
-				};
-
-			};
-
-		};
-
-	};
-};

Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32-ltdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 lcd-tft display controller
+
+maintainers:
+  - Philippe Cornu <philippe.cornu@st.com>
+  - Yannick Fertre <yannick.fertre@st.com>
+
+properties:
+  compatible:
+    const: st,stm32-ltdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: events interrupt line.
+      - description: errors interrupt line.
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: lcd
+
+  resets:
+    maxItems: 1
+
+  port:
+    type: object
+    description:
+      "Video port for DPI RGB output.
+      ltdc has one video port with up to 2 endpoints:
+      - for external dpi rgb panel or bridge, using gpios.
+      - for internal dpi input of the MIPI DSI host controller.
+      Note: These 2 endpoints cannot be activated simultaneously.
+      Please refer to the bindings defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt."
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    ltdc: display-controller@40016800 {
+        compatible = "st,stm32-ltdc";
+        reg = <0x5a001000 0x400>;
+        interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc LTDC_PX>;
+        clock-names = "lcd";
+        resets = <&rcc LTDC_R>;
+
+        port {
+             ltdc_out_dsi: endpoint {
+                     remote-endpoint = <&dsi_in>;
+             };
+        };
+    };
+
+...
+

Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml

@@ -68,9 +68,7 @@ else:
     clocks:
       maxItems: 1
 
-# FIXME: We should set it, but it would report all the generic
-# properties as additional properties.
-# additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/eeprom/at24.txt

-EEPROMs (I2C)
-
-Required properties:
-
-  - compatible: Must be a "<manufacturer>,<model>" pair. The following <model>
-                values are supported (assuming "atmel" as manufacturer):
-
-                "atmel,24c00",
-                "atmel,24c01",
-                "atmel,24cs01",
-                "atmel,24c02",
-                "atmel,24cs02",
-                "atmel,24mac402",
-                "atmel,24mac602",
-                "atmel,spd",
-                "atmel,24c04",
-                "atmel,24cs04",
-                "atmel,24c08",
-                "atmel,24cs08",
-                "atmel,24c16",
-                "atmel,24cs16",
-                "atmel,24c32",
-                "atmel,24cs32",
-                "atmel,24c64",
-                "atmel,24cs64",
-                "atmel,24c128",
-                "atmel,24c256",
-                "atmel,24c512",
-                "atmel,24c1024",
-                "atmel,24c2048",
-
-                If <manufacturer> is not "atmel", then a fallback must be used
-                with the same <model> and "atmel" as manufacturer.
-
-                Example:
-                        compatible = "microchip,24c128", "atmel,24c128";
-
-                Supported manufacturers are:
-
-                "catalyst",
-                "microchip",
-                "nxp",
-                "ramtron",
-                "renesas",
-                "rohm",
-                "st",
-
-                Some vendors use different model names for chips which are just
-                variants of the above. Known such exceptions are listed below:
-
-                "nxp,se97b" - the fallback is "atmel,24c02",
-                "renesas,r1ex24002" - the fallback is "atmel,24c02"
-                "renesas,r1ex24016" - the fallback is "atmel,24c16"
-                "renesas,r1ex24128" - the fallback is "atmel,24c128"
-                "rohm,br24t01" - the fallback is "atmel,24c01"
-
-  - reg: The I2C address of the EEPROM.
-
-Optional properties:
-
-  - pagesize: The length of the pagesize for writing. Please consult the
-              manual of your device, that value varies a lot. A wrong value
-              may result in data loss! If not specified, a safety value of
-              '1' is used which will be very slow.
-
-  - read-only: This parameterless property disables writes to the eeprom.
-
-  - size: Total eeprom size in bytes.
-
-  - no-read-rollover: This parameterless property indicates that the
-                      multi-address eeprom does not automatically roll over
-                      reads to the next slave address. Please consult the
-                      manual of your device.
-
-  - wp-gpios: GPIO to which the write-protect pin of the chip is connected.
-
-  - address-width: number of address bits (one of 8, 16).
-
-  - num-addresses: total number of i2c slave addresses this device takes
-
-Example:
-
-eeprom@52 {
-	compatible = "atmel,24c32";
-	reg = <0x52>;
-	pagesize = <32>;
-	wp-gpios = <&gpio1 3 0>;
-	num-addresses = <8>;
-};
+This file has been moved to at24.yaml.

Documentation/devicetree/bindings/eeprom/at24.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright 2019 BayLibre SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/eeprom/at24.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: I2C EEPROMs compatible with Atmel's AT24
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^eeprom@[0-9a-f]{1,2}$"
+
+  # There are multiple known vendors who manufacture EEPROM chips compatible
+  # with Atmel's AT24. The compatible string requires either a single item
+  # if the memory comes from Atmel (in which case the vendor part must be
+  # 'atmel') or two items with the same 'model' part where the vendor part of
+  # the first one is the actual manufacturer and the second item is the
+  # corresponding 'atmel,<model>' from Atmel.
+  compatible:
+    oneOf:
+      - allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|mac)[0-9]+|spd)$"
+              - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
+          - oneOf:
+              - items:
+                  pattern: c00$
+              - items:
+                  pattern: c01$
+              - items:
+                  pattern: cs01$
+              - items:
+                  pattern: c02$
+              - items:
+                  pattern: cs02$
+              - items:
+                  pattern: mac402$
+              - items:
+                  pattern: mac602$
+              - items:
+                  pattern: c04$
+              - items:
+                  pattern: cs04$
+              - items:
+                  pattern: c08$
+              - items:
+                  pattern: cs08$
+              - items:
+                  pattern: c16$
+              - items:
+                  pattern: cs16$
+              - items:
+                  pattern: c32$
+              - items:
+                  pattern: cs32$
+              - items:
+                  pattern: c64$
+              - items:
+                  pattern: cs64$
+              - items:
+                  pattern: c128$
+              - items:
+                  pattern: cs128$
+              - items:
+                  pattern: c256$
+              - items:
+                  pattern: cs256$
+              - items:
+                  pattern: c512$
+              - items:
+                  pattern: cs512$
+              - items:
+                  pattern: c1024$
+              - items:
+                  pattern: cs1024$
+              - items:
+                  pattern: c2048$
+              - items:
+                  pattern: cs2048$
+              - items:
+                  pattern: spd$
+      # These are special cases that don't conform to the above pattern.
+      # Each requires a standard at24 model as fallback.
+      - items:
+          - const: rohm,br24t01
+          - const: atmel,24c01
+      - items:
+          - const: nxp,se97b
+          - const: atmel,24c02
+      - items:
+          - const: renesas,r1ex24002
+          - const: atmel,24c02
+      - items:
+          - const: renesas,r1ex24016
+          - const: atmel,24c16
+      - items:
+          - const: giantec,gt24c32a
+          - const: atmel,24c32
+      - items:
+          - const: renesas,r1ex24128
+          - const: atmel,24c128
+
+  reg:
+    maxItems: 1
+
+  pagesize:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The length of the pagesize for writing. Please consult the
+      manual of your device, that value varies a lot. A wrong value
+      may result in data loss! If not specified, a safety value of
+      '1' is used which will be very slow.
+    enum: [ 1, 8, 16, 32, 64, 128, 258 ]
+    default: 1
+
+  read-only:
+    $ref: /schemas/types.yaml#definitions/flag
+    description:
+      Disables writes to the eeprom.
+
+  size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Total eeprom size in bytes.
+
+  no-read-rollover:
+    $ref: /schemas/types.yaml#definitions/flag
+    description:
+      Indicates that the multi-address eeprom does not automatically roll
+      over reads to the next slave address. Please consult the manual of
+      your device.
+
+  wp-gpios:
+    description:
+      GPIO to which the write-protect pin of the chip is connected.
+    maxItems: 1
+
+  address-width:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of address bits.
+    default: 8
+    enum: [ 8, 16 ]
+
+  num-addresses:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Total number of i2c slave addresses this device takes.
+    default: 1
+    minimum: 1
+    maximum: 8
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      eeprom@52 {
+          compatible = "microchip,24c32", "atmel,24c32";
+          reg = <0x52>;
+          pagesize = <32>;
+          wp-gpios = <&gpio1 3 0>;
+          num-addresses = <8>;
+      };
+    };
+...

Documentation/devicetree/bindings/example-schema.yaml

-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 # Copyright 2018 Linaro Ltd.
 %YAML 1.2
 ---
@@ -71,7 +71,7 @@ properties:
     # minItems/maxItems equal to 2 is implied
 
   reg-names:
-    # The core schema enforces this is a string array
+    # The core schema enforces this (*-names) is a string array
     items:
       - const: core
       - const: aux
@@ -79,7 +79,8 @@ properties:
   clocks:
     # Cases that have only a single entry just need to express that with maxItems
     maxItems: 1
-    description: bus clock
+    description: bus clock. A description is only needed for a single item if
+      there's something unique to add.
 
   clock-names:
     items:
@@ -127,6 +128,14 @@ properties:
     maxItems: 1
     description: A connection of the 'foo' gpio line.
 
+  # *-supply is always a single phandle, so nothing more to define.
+  foo-supply: true
+
+  # Vendor specific properties
+  #
+  # Vendor specific properties have slightly different schema requirements than
+  # common properties. They must have at least a type definition and
+  # 'description'.
   vendor,int-property:
     description: Vendor specific properties must have a description
     # 'allOf' is the json-schema way of subclassing a schema. Here the base
@@ -137,9 +146,9 @@ properties:
       - enum: [2, 4, 6, 8, 10]
 
   vendor,bool-property:
-    description: Vendor specific properties must have a description
-    # boolean properties is one case where the json-schema 'type' keyword
-    # can be used directly
+    description: Vendor specific properties must have a description. Boolean
+      properties are one case where the json-schema 'type' keyword can be used
+      directly.
     type: boolean
 
   vendor,string-array-property:
@@ -151,14 +160,72 @@ properties:
           - enum: [ foo, bar ]
           - enum: [ baz, boo ]
 
+  vendor,property-in-standard-units-microvolt:
+    description: Vendor specific properties having a standard unit suffix
+      don't need a type.
+    enum: [ 100, 200, 300 ]
+
+  child-node:
+    description: Child nodes are just another property from a json-schema
+      perspective.
+    type: object  # DT nodes are json objects
+    properties:
+      vendor,a-child-node-property:
+        description: Child node properties have all the same schema
+          requirements.
+        type: boolean
+
+    required:
+      - vendor,a-child-node-property
+
+# Describe the relationship between different properties
+dependencies:
+  # 'vendor,bool-property' is only allowed when 'vendor,string-array-property'
+  # is present
+  vendor,bool-property: [ vendor,string-array-property ]
+  # Expressing 2 properties in both orders means all of the set of properties
+  # must be present or none of them.
+  vendor,string-array-property: [ vendor,bool-property ]
+
 required:
   - compatible
   - reg
   - interrupts
   - interrupt-controller
 
+# if/then schema can be used to handle conditions on a property affecting
+# another property. A typical case is a specific 'compatible' value changes the
+# constraints on other properties.
+#
+# For multiple 'if' schema, group them under an 'allOf'.
+#
+# If the conditionals become too unweldy, then it may be better to just split
+# the binding into separate schema documents.
+if:
+  properties:
+    compatible:
+      contains:
+        const: vendor,soc2-ip
+then:
+  required:
+    - foo-supply
+
+# Ideally, the schema should have this line otherwise any other properties
+# present are allowed. There's a few common properties such as 'status' and
+# 'pinctrl-*' which are added automatically by the tooling.
+#
+# This can't be used in cases where another schema is referenced
+# (i.e. allOf: [{$ref: ...}]).
+additionalProperties: false
+
 examples:
-  # Examples are now compiled with dtc
+  # Examples are now compiled with dtc and validated against the schemas
+  #
+  # Examples have a default #address-cells and #size-cells value of 1. This can
+  # be overridden or an appropriate parent bus node should be shown (such as on
+  # i2c buses).
+  #
+  # Any includes used have to be explicitly included.
   - |
     node@1000 {
           compatible = "vendor,soc4-ip", "vendor,soc1-ip";

Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml

@@ -25,8 +25,6 @@ properties:
           - const: intel,ixp4xx-network-processing-engine
 
   reg:
-    minItems: 3
-    maxItems: 3
     items:
       - description: NPE0 register range
       - description: NPE1 register range

Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt

@@ -32,7 +32,7 @@ implemented by this node:
 
 - .../clock/clock-bindings.txt
 - <dt-bindings/clock/tegra186-clock.h>
-- ../power/power_domain.txt
+- ../power/power-domain.yaml
 - <dt-bindings/power/tegra186-powergate.h>
 - .../reset/reset.txt
 - <dt-bindings/reset/tegra186-reset.h>

Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml

@@ -17,6 +17,7 @@ properties:
     items:
       - enum:
           - amlogic,meson-g12a-mali
+          - realtek,rtd1619-mali
       - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
 
   reg:
@@ -37,8 +38,7 @@ properties:
   clocks:
     maxItems: 1
 
-  mali-supply:
-    maxItems: 1
+  mali-supply: true
 
   operating-points-v2: true
 

Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml

@@ -14,6 +14,14 @@ properties:
     pattern: '^gpu@[a-f0-9]+$'
   compatible:
     oneOf:
+      - items:
+          - enum:
+             - samsung,exynos5250-mali
+          - const: arm,mali-t604
+      - items:
+          - enum:
+             - samsung,exynos5420-mali
+          - const: arm,mali-t628
       - items:
           - enum:
              - allwinner,sun50i-h6-mali
@@ -21,26 +29,19 @@ properties:
       - items:
           - enum:
              - amlogic,meson-gxm-mali
+             - realtek,rtd1295-mali
           - const: arm,mali-t820
       - items:
           - enum:
              - rockchip,rk3288-mali
+             - samsung,exynos5433-mali
           - const: arm,mali-t760
       - items:
           - enum:
              - rockchip,rk3399-mali
           - const: arm,mali-t860
-      - items:
-          - enum:
-             - samsung,exynos5250-mali
-          - const: arm,mali-t604
-      - items:
-          - enum:
-             - samsung,exynos5433-mali
-          - const: arm,mali-t760
 
           # "arm,mali-t624"
-          # "arm,mali-t628"
           # "arm,mali-t830"
           # "arm,mali-t880"
 
@@ -69,8 +70,7 @@ properties:
       - const: core
       - const: bus
 
-  mali-supply:
-    maxItems: 1
+  mali-supply: true
 
   resets:
     minItems: 1

Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml

@@ -97,8 +97,7 @@ properties:
 
   memory-region: true
 
-  mali-supply:
-    maxItems: 1
+  mali-supply: true
 
   power-domains:
     maxItems: 1

Documentation/devicetree/bindings/gpu/samsung-g2d.txt

-* Samsung 2D Graphics Accelerator
-
-Required properties:
-  - compatible : value should be one among the following:
-	(a) "samsung,s5pv210-g2d" for G2D IP present in S5PV210 & Exynos4210 SoC
-	(b) "samsung,exynos4212-g2d" for G2D IP present in Exynos4x12 SoCs
-	(c) "samsung,exynos5250-g2d" for G2D IP present in Exynos5250 SoC
-
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-
-  - interrupts : G2D interrupt number to the CPU.
-  - clocks : from common clock binding: handle to G2D clocks.
-  - clock-names : names of clocks listed in clocks property, in the same
-		  order, depending on SoC type:
-		  - for S5PV210 and Exynos4 based SoCs: "fimg2d" and
-		    "sclk_fimg2d"
-		  - for Exynos5250 SoC: "fimg2d".
-
-Example:
-	g2d@12800000 {
-		compatible = "samsung,s5pv210-g2d";
-		reg = <0x12800000 0x1000>;
-		interrupts = <0 89 0>;
-		clocks = <&clock 177>, <&clock 277>;
-		clock-names = "sclk_fimg2d", "fimg2d";
-	};

Documentation/devicetree/bindings/gpu/samsung-g2d.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/samsung-g2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC 2D Graphics Accelerator
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-g2d    # in S5PV210 & Exynos4210 SoC
+      - samsung,exynos4212-g2d # in Exynos4x12 SoCs
+      - samsung,exynos5250-g2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: {}
+  clock-names: {}
+  iommus: {}
+  power-domains: {}
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: samsung,exynos5250-g2d
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: fimg2d clock
+    clock-names:
+      items:
+        - const: fimg2d
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: sclk_fimg2d clock
+        - description: fimg2d clock
+    clock-names:
+      items:
+        - const: sclk_fimg2d
+        - const: fimg2d
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    g2d@12800000 {
+        compatible = "samsung,s5pv210-g2d";
+        reg = <0x12800000 0x1000>;
+        interrupts = <0 89 0>;
+        clocks = <&clock 177>, <&clock 277>;
+        clock-names = "sclk_fimg2d", "fimg2d";
+    };
+
+...

Documentation/devicetree/bindings/gpu/samsung-rotator.txt

-* Samsung Image Rotator
-
-Required properties:
-  - compatible : value should be one of the following:
-	* "samsung,s5pv210-rotator" for Rotator IP in S5PV210
-	* "samsung,exynos4210-rotator" for Rotator IP in Exynos4210
-	* "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412
-	* "samsung,exynos5250-rotator" for Rotator IP in Exynos5250
-
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-
-  - interrupts : Interrupt specifier for rotator interrupt, according to format
-		 specific to interrupt parent.
-
-  - clocks : Clock specifier for rotator clock, according to generic clock
-	     bindings. (See Documentation/devicetree/bindings/clock/exynos*.txt)
-
-  - clock-names : Names of clocks. For exynos rotator, it should be "rotator".
-
-Example:
-	rotator@12810000 {
-		compatible = "samsung,exynos4210-rotator";
-		reg = <0x12810000 0x1000>;
-		interrupts = <0 83 0>;
-		clocks = <&clock 278>;
-		clock-names = "rotator";
-	};

Documentation/devicetree/bindings/gpu/samsung-rotator.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/samsung-rotator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC Image Rotator
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - "samsung,s5pv210-rotator"
+      - "samsung,exynos4210-rotator"
+      - "samsung,exynos4212-rotator"
+      - "samsung,exynos5250-rotator"
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rotator
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    rotator@12810000 {
+        compatible = "samsung,exynos4210-rotator";
+        reg = <0x12810000 0x1000>;
+        interrupts = <0 83 0>;
+        clocks = <&clock 278>;
+        clock-names = "rotator";
+    };
+

Documentation/devicetree/bindings/gpu/samsung-scaler.txt

-* Samsung Exynos Image Scaler
-
-Required properties:
-  - compatible : value should be one of the following:
-	(a) "samsung,exynos5420-scaler" for Scaler IP in Exynos5420
-	(b) "samsung,exynos5433-scaler" for Scaler IP in Exynos5433
-
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-
-  - interrupts : Interrupt specifier for scaler interrupt, according to format
-		 specific to interrupt parent.
-
-  - clocks : Clock specifier for scaler clock, according to generic clock
-	     bindings. (See Documentation/devicetree/bindings/clock/exynos*.txt)
-
-  - clock-names : Names of clocks. For exynos scaler, it should be "mscl"
-		  on 5420 and "pclk", "aclk" and "aclk_xiu" on 5433.
-
-Example:
-	scaler@12800000 {
-		compatible = "samsung,exynos5420-scaler";
-		reg = <0x12800000 0x1294>;
-		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_MSCL0>;
-		clock-names = "mscl";
-	};

Documentation/devicetree/bindings/gpu/samsung-scaler.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/samsung-scaler.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Image Scaler
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5420-scaler
+      - samsung,exynos5433-scaler
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: {}
+  clock-names: {}
+  iommus: {}
+  power-domains: {}
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: samsung,exynos5420-scaler
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: mscl clock
+
+    clock-names:
+      items:
+        - const: mscl
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: pclk clock
+        - description: aclk clock
+        - description: aclk_xiu clock
+
+    clock-names:
+      items:
+        - const: pclk
+        - const: aclk
+        - const: aclk_xiu
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    scaler@12800000 {
+        compatible = "samsung,exynos5420-scaler";
+        reg = <0x12800000 0x1294>;
+        interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_MSCL0>;
+        clock-names = "mscl";
+    };
+
+...

Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt

-STM32 Hardware Spinlock Device Binding
--------------------------------------
-
-Required properties :
-- compatible : should be "st,stm32-hwspinlock".
-- reg : the register address of hwspinlock.
-- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
-	hwlock, so the number of cells should be <1> here.
-- clock-names : Must contain "hsem".
-- clocks : Must contain a phandle entry for the clock in clock-names, see the
-	common clock bindings.
-
-Please look at the generic hwlock binding for usage information for consumers,
-"Documentation/devicetree/bindings/hwlock/hwlock.txt"
-
-Example of hwlock provider:
-	hwspinlock@4c000000 {
-		compatible = "st,stm32-hwspinlock";
-		#hwlock-cells = <1>;
-		reg = <0x4c000000 0x400>;
-		clocks = <&rcc HSEM>;
-		clock-names = "hsem";
-	};

Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwlock/st,stm32-hwspinlock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Hardware Spinlock bindings
+
+maintainers:
+  - Benjamin Gaignard <benjamin.gaignard@st.com>
+  - Fabien Dessenne <fabien.dessenne@st.com>
+
+properties:
+  "#hwlock-cells":
+    const: 1
+
+  compatible:
+    const: st,stm32-hwspinlock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: hsem
+
+required:
+  - "#hwlock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    hwspinlock@4c000000 {
+        compatible = "st,stm32-hwspinlock";
+        #hwlock-cells = <1>;
+        reg = <0x4c000000 0x400>;
+        clocks = <&rcc HSEM>;
+        clock-names = "hsem";
+    };
+
+...

Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml

@@ -40,9 +40,7 @@ required:
   - clocks
   - resets
 
-# FIXME: We should set it, but it would report all the generic
-# properties as additional properties.
-# additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/i2c/i2c-stm32.txt

-* I2C controller embedded in STMicroelectronics STM32 I2C platform
-
-Required properties:
-- compatible: Must be one of the following
-  - "st,stm32f4-i2c"
-  - "st,stm32f7-i2c"
-- reg: Offset and length of the register set for the device
-- interrupts: Must contain the interrupt id for I2C event and then the
-  interrupt id for I2C error.
-- resets: Must contain the phandle to the reset controller.
-- clocks: Must contain the input clock of the I2C instance.
-- A pinctrl state named "default" must be defined to set pins in mode of
-  operation for I2C transfer
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- clock-frequency: Desired I2C bus clock frequency in Hz. If not specified,
-  the default 100 kHz frequency will be used.
-  For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are
-  100000 and 400000.
-  For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, Fast-mode and Fast-mode
-  Plus are supported, possible values are 100000, 400000 and 1000000.
-- dmas: List of phandles to rx and tx DMA channels. Refer to stm32-dma.txt.
-- dma-names: List of dma names. Valid names are: "rx" and "tx".
-- i2c-scl-rising-time-ns: I2C SCL Rising time for the board (default: 25)
-  For STM32F7, STM32H7 and STM32MP1 only.
-- i2c-scl-falling-time-ns: I2C SCL Falling time for the board (default: 10)
-  For STM32F7, STM32H7 and STM32MP1 only.
-  I2C Timings are derived from these 2 values
-- st,syscfg-fmp: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
-  Plus speed is selected by slave.
-	1st cell: phandle to syscfg
-	2nd cell: register offset within SYSCFG
-	3rd cell: register bitmask for FMP bit
-  For STM32F7, STM32H7 and STM32MP1 only.
-
-Example:
-
-	i2c@40005400 {
-		compatible = "st,stm32f4-i2c";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x40005400 0x400>;
-		interrupts = <31>,
-			     <32>;
-		resets = <&rcc 277>;
-		clocks = <&rcc 0 149>;
-		pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>;
-		pinctrl-names = "default";
-	};
-
-	i2c@40005400 {
-		compatible = "st,stm32f7-i2c";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x40005400 0x400>;
-		interrupts = <31>,
-			     <32>;
-		resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
-		clocks = <&rcc 1 CLK_I2C1>;
-		pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>;
-		pinctrl-names = "default";
-		st,syscfg-fmp = <&syscfg 0x4 0x1>;
-	};

Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml

@@ -93,9 +93,7 @@ allOf:
       required:
         - resets
 
-# FIXME: We should set it, but it would report all the generic
-# properties as additional properties.
-# additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,stm32-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controller embedded in STMicroelectronics STM32 I2C platform
+
+maintainers:
+  - Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32f7-i2c
+    then:
+      properties:
+        i2c-scl-rising-time-ns:
+          default: 25
+
+        i2c-scl-falling-time-ns:
+          default: 10
+
+        st,syscfg-fmp:
+          description: Use to set Fast Mode Plus bit within SYSCFG when
+                       Fast Mode Plus speed is selected by slave.
+                       Format is phandle to syscfg / register offset within
+                       syscfg / register bitmask for FMP bit.
+          allOf:
+            - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+            - items:
+                minItems: 3
+                maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32f4-i2c
+    then:
+      properties:
+        clock-frequency:
+          enum: [100000, 400000]
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-i2c
+      - st,stm32f7-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: interrupt ID for I2C event
+      - description: interrupt ID for I2C error
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: RX DMA Channel phandle
+      - description: TX DMA Channel phandle
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clock-frequency:
+    description: Desired I2C bus clock frequency in Hz. If not specified,
+                 the default 100 kHz frequency will be used.
+                 For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode,
+                 Fast-mode and Fast-mode Plus are supported, possible
+                 values are 100000, 400000 and 1000000.
+    default: 100000
+    enum: [100000, 400000, 1000000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    //Example 1 (with st,stm32f4-i2c compatible)
+      i2c@40005400 {
+          compatible = "st,stm32f4-i2c";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0x40005400 0x400>;
+          interrupts = <31>,
+                       <32>;
+          resets = <&rcc 277>;
+          clocks = <&rcc 0 149>;
+      };
+
+    //Example 2 (with st,stm32f7-i2c compatible)
+      i2c@40005800 {
+          compatible = "st,stm32f7-i2c";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0x40005800 0x400>;
+          interrupts = <31>,
+                       <32>;
+          resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+          clocks = <&rcc 1 CLK_I2C1>;
+      };
+
+    //Example 3 (with st,stm32f7-i2c compatible on stm32mp)
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+      i2c@40013000 {
+          compatible = "st,stm32f7-i2c";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0x40013000 0x400>;
+          interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+          clocks = <&rcc I2C2_K>;
+          resets = <&rcc I2C2_R>;
+          i2c-scl-rising-time-ns = <185>;
+          i2c-scl-falling-time-ns = <20>;
+          st,syscfg-fmp = <&syscfg 0x4 0x2>;
+      };
+...

Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml

@@ -45,15 +45,12 @@ properties:
 
   refin1-supply:
     description: refin1 supply can be used as reference for conversion.
-    maxItems: 1
 
   refin2-supply:
     description: refin2 supply can be used as reference for conversion.
-    maxItems: 1
 
   avdd-supply:
     description: avdd supply can be used as reference for conversion.
-    maxItems: 1
 
 required:
   - compatible

Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml

@@ -31,10 +31,7 @@ properties:
 
   spi-cpha: true
 
-  avcc-supply:
-    description:
-      Phandle to the Avcc power supply
-    maxItems: 1
+  avcc-supply: true
 
   interrupts:
     maxItems: 1

Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml

@@ -39,7 +39,6 @@ properties:
   avdd-supply:
     description:
       The regulator supply for the ADC reference voltage.
-    maxItems: 1
 
   powerdown-gpios:
     description:

Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml

@@ -41,7 +41,6 @@ properties:
   avdd-supply:
     description:
       Definition of the regulator used as analog supply
-    maxItems: 1
 
   clock-frequency:
     minimum: 20000

Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt

-Samsung Exynos Analog to Digital Converter bindings
-
-The devicetree bindings are for the new ADC driver written for
-Exynos4 and upward SoCs from Samsung.
-
-New driver handles the following
-1. Supports ADC IF found on EXYNOS4412/EXYNOS5250
-   and future SoCs from Samsung
-2. Add ADC driver under iio/adc framework
-3. Also adds the Documentation for device tree bindings
-
-Required properties:
-- compatible:		Must be "samsung,exynos-adc-v1"
-				for Exynos5250 controllers.
-			Must be "samsung,exynos-adc-v2" for
-				future controllers.
-			Must be "samsung,exynos3250-adc" for
-				controllers compatible with ADC of Exynos3250.
-			Must be "samsung,exynos4212-adc" for
-				controllers compatible with ADC of Exynos4212 and Exynos4412.
-			Must be "samsung,exynos7-adc" for
-				the ADC in Exynos7 and compatibles
-			Must be "samsung,s3c2410-adc" for
-				the ADC in s3c2410 and compatibles
-			Must be "samsung,s3c2416-adc" for
-				the ADC in s3c2416 and compatibles
-			Must be "samsung,s3c2440-adc" for
-				the ADC in s3c2440 and compatibles
-			Must be "samsung,s3c2443-adc" for
-				the ADC in s3c2443 and compatibles
-			Must be "samsung,s3c6410-adc" for
-				the ADC in s3c6410 and compatibles
-			Must be "samsung,s5pv210-adc" for
-				the ADC in s5pv210 and compatibles
-- reg:			List of ADC register address range
-			- The base address and range of ADC register
-			- The base address and range of ADC_PHY register (every
-			  SoC except for s3c24xx/s3c64xx ADC)
-- interrupts: 		Contains the interrupt information for the timer. The
-			format is being dependent on which interrupt controller
-			the Samsung device uses.
-- #io-channel-cells = <1>; As ADC has multiple outputs
-- clocks		From common clock bindings: handles to clocks specified
-			in "clock-names" property, in the same order.
-- clock-names		From common clock bindings: list of clock input names
-			used by ADC block:
-			- "adc" : ADC bus clock
-			- "sclk" : ADC special clock (only for Exynos3250 and
-				   compatible ADC block)
-- vdd-supply		VDD input supply.
-
-- samsung,syscon-phandle Contains the PMU system controller node
-			(To access the ADC_PHY register on Exynos5250/5420/5800/3250)
-Optional properties:
-- has-touchscreen:	If present, indicates that a touchscreen is
-			connected an usable.
-
-Note: child nodes can be added for auto probing from device tree.
-
-Example: adding device info in dtsi file
-
-adc: adc@12d10000 {
-	compatible = "samsung,exynos-adc-v1";
-	reg = <0x12D10000 0x100>;
-	interrupts = <0 106 0>;
-	#io-channel-cells = <1>;
-	io-channel-ranges;
-
-	clocks = <&clock 303>;
-	clock-names = "adc";
-
-	vdd-supply = <&buck5_reg>;
-	samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-Example: adding device info in dtsi file for Exynos3250 with additional sclk
-
-adc: adc@126c0000 {
-	compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
-	reg = <0x126C0000 0x100>;
-	interrupts = <0 137 0>;
-	#io-channel-cells = <1>;
-	io-channel-ranges;
-
-	clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
-	clock-names = "adc", "sclk";
-
-	vdd-supply = <&buck5_reg>;
-	samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-Example: Adding child nodes in dts file
-
-adc@12d10000 {
-
-	/* NTC thermistor is a hwmon device */
-	ncp15wb473@0 {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;
-		pullup-ohm = <47000>;
-		pulldown-ohm = <0>;
-		io-channels = <&adc 4>;
-	};
-};
-
-Note: Does not apply to ADC driver under arch/arm/plat-samsung/
-Note: The child node can be added under the adc node or separately.

Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/samsung,exynos-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Analog to Digital Converter (ADC)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos-adc-v1                 # Exynos5250
+      - samsung,exynos-adc-v2
+      - samsung,exynos3250-adc
+      - samsung,exynos4212-adc                # Exynos4212 and Exynos4412
+      - samsung,exynos7-adc
+      - samsung,s3c2410-adc
+      - samsung,s3c2416-adc
+      - samsung,s3c2440-adc
+      - samsung,s3c2443-adc
+      - samsung,s3c6410-adc
+      - samsung,s5pv210-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      Phandle to ADC bus clock. For Exynos3250 additional clock is needed.
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    description:
+      Must contain clock names (adc, sclk) matching phandles in clocks
+      property.
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  vdd-supply: true
+
+  samsung,syscon-phandle:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description:
+      Phandle to the PMU system controller node (to access the ADC_PHY
+      register on Exynos3250/4x12/5250/5420/5800).
+
+  has-touchscreen:
+    description:
+      If present, indicates that a touchscreen is connected and usable.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - "#io-channel-cells"
+  - vdd-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos-adc-v1
+              - samsung,exynos-adc-v2
+              - samsung,exynos3250-adc
+              - samsung,exynos4212-adc
+              - samsung,s5pv210-adc
+    then:
+      required:
+        - samsung,syscon-phandle
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-adc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: adc
+            - const: sclk
+    else:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: adc
+
+examples:
+  - |
+    adc: adc@12d10000 {
+        compatible = "samsung,exynos-adc-v1";
+        reg = <0x12d10000 0x100>;
+        interrupts = <0 106 0>;
+        #io-channel-cells = <1>;
+        io-channel-ranges;
+
+        clocks = <&clock 303>;
+        clock-names = "adc";
+
+        vdd-supply = <&buck5_reg>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+
+        /* NTC thermistor is a hwmon device */
+        ncp15wb473@0 {
+            compatible = "murata,ncp15wb473";
+            pullup-uv = <1800000>;
+            pullup-ohm = <47000>;
+            pulldown-ohm = <0>;
+            io-channels = <&adc 4>;
+          };
+    };
+
+  - |
+    #include <dt-bindings/clock/exynos3250.h>
+
+    adc@126c0000 {
+        compatible = "samsung,exynos3250-adc";
+        reg = <0x126C0000 0x100>;
+        interrupts = <0 137 0>;
+        #io-channel-cells = <1>;
+        io-channel-ranges;
+
+        clocks = <&cmu CLK_TSADC>,
+                 <&cmu CLK_SCLK_TSADC>;
+        clock-names = "adc", "sclk";
+
+        vdd-supply = <&buck5_reg>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+    };

Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml

@@ -25,7 +25,6 @@ properties:
 
   vcc-supply:
     description: regulator that provides power to the sensor
-    maxItems: 1
 
   plantower,set-gpios:
     description: GPIO connected to the SET line

Documentation/devicetree/bindings/iio/pressure/bmp085.yaml

@@ -28,12 +28,10 @@ properties:
   vddd-supply:
     description:
       digital voltage regulator (see regulator/regulator.txt)
-    maxItems: 1
 
   vdda-supply:
     description:
       analog voltage regulator (see regulator/regulator.txt)
-    maxItems: 1
 
   reset-gpios:
     description:

Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt

-STMicroelectronics STM32 Low-Power Timer Trigger
-
-STM32 Low-Power Timer provides trigger source (LPTIM output) that can be used
-by STM32 internal ADC and/or DAC.
-
-Must be a sub-node of an STM32 Low-Power Timer device tree node.
-See ../mfd/stm32-lptimer.txt for details about the parent node.
-
-Required properties:
-- compatible:		Must be "st,stm32-lptimer-trigger".
-- reg:			Identify trigger hardware block. Must be 0, 1 or 2
-			respectively for lptimer1, lptimer2 or lptimer3
-			trigger output.
-
-Example:
-	timer@40002400 {
-		compatible = "st,stm32-lptimer";
-		...
-		trigger@0 {
-			compatible = "st,stm32-lptimer-trigger";
-			reg = <0>;
-		};
-	};

Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt

-STMicroelectronics STM32 Timers IIO timer bindings
-
-Must be a sub-node of an STM32 Timers device tree node.
-See ../mfd/stm32-timers.txt for details about the parent node.
-
-Required parameters:
-- compatible:	Must be one of:
-		"st,stm32-timer-trigger"
-		"st,stm32h7-timer-trigger"
-- reg:		Identify trigger hardware block.
-
-Example:
-	timers@40010000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "st,stm32-timers";
-		reg = <0x40010000 0x400>;
-		clocks = <&rcc 0 160>;
-		clock-names = "int";
-
-		timer@0 {
-			compatible = "st,stm32-timer-trigger";
-			reg = <0>;
-		};
-	};

Documentation/devicetree/bindings/input/max77650-onkey.txt

-Onkey driver for MAX77650 PMIC from Maxim Integrated.
-
-This module is part of the MAX77650 MFD device. For more details
-see Documentation/devicetree/bindings/mfd/max77650.txt.
-
-The onkey controller is represented as a sub-node of the PMIC node on
-the device tree.
-
-Required properties:
---------------------
-- compatible:		Must be "maxim,max77650-onkey".
-
-Optional properties:
-- linux,code:		The key-code to be reported when the key is pressed.
-			Defaults to KEY_POWER.
-- maxim,onkey-slide:	The system's button is a slide switch, not the default
-			push button.
-
-Example:
---------
-
-	onkey {
-		compatible = "maxim,max77650-onkey";
-		linux,code = <KEY_END>;
-		maxim,onkey-slide;
-	};

Documentation/devicetree/bindings/input/max77650-onkey.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/max77650-onkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Onkey driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+  This module is part of the MAX77650 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+  The onkey controller is represented as a sub-node of the PMIC node on
+  the device tree.
+
+properties:
+  compatible:
+    const: maxim,max77650-onkey
+
+  linux,code:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The key-code to be reported when the key is pressed. Defaults
+      to KEY_POWER.
+
+  maxim,onkey-slide:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The system's button is a slide switch, not the default push button.
+
+required:
+  - compatible

Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt

-Qualcomm QCS404 Network-On-Chip interconnect driver binding
------------------------------------------------------------
-
-Required properties :
-- compatible : shall contain only one of the following:
-			"qcom,qcs404-bimc"
-			"qcom,qcs404-pcnoc"
-			"qcom,qcs404-snoc"
-- #interconnect-cells : should contain 1
-
-reg : specifies the physical base address and size of registers
-clocks : list of phandles and specifiers to all interconnect bus clocks
-clock-names : clock names should include both "bus" and "bus_a"
-
-Example:
-
-soc {
-	...
-	bimc: interconnect@400000 {
-		reg = <0x00400000 0x80000>;
-		compatible = "qcom,qcs404-bimc";
-		#interconnect-cells = <1>;
-		clock-names = "bus", "bus_a";
-		clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-			<&rpmcc RPM_SMD_BIMC_A_CLK>;
-	};
-
-	pnoc: interconnect@500000 {
-		reg = <0x00500000 0x15080>;
-		compatible = "qcom,qcs404-pcnoc";
-		#interconnect-cells = <1>;
-		clock-names = "bus", "bus_a";
-		clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-			<&rpmcc RPM_SMD_PNOC_A_CLK>;
-	};
-
-	snoc: interconnect@580000 {
-		reg = <0x00580000 0x23080>;
-		compatible = "qcom,qcs404-snoc";
-		#interconnect-cells = <1>;
-		clock-names = "bus", "bus_a";
-		clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-			<&rpmcc RPM_SMD_SNOC_A_CLK>;
-	};
-};

Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qcs404.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS404 Network-On-Chip interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+
+description: |
+   The Qualcomm QCS404 interconnect providers support adjusting the
+   bandwidth requirements between the various NoC fabrics.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,qcs404-bimc
+      - qcom,qcs404-pcnoc
+      - qcom,qcs404-snoc
+
+  '#interconnect-cells':
+    const: 1
+
+  clock-names:
+    items:
+      - const: bus
+      - const: bus_a
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Bus A Clock
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/clock/qcom,rpmcc.h>
+
+      bimc: interconnect@400000 {
+              reg = <0x00400000 0x80000>;
+              compatible = "qcom,qcs404-bimc";
+              #interconnect-cells = <1>;
+              clock-names = "bus", "bus_a";
+              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
+      };
+
+      pnoc: interconnect@500000 {
+             reg = <0x00500000 0x15080>;
+             compatible = "qcom,qcs404-pcnoc";
+             #interconnect-cells = <1>;
+             clock-names = "bus", "bus_a";
+             clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+                      <&rpmcc RPM_SMD_PNOC_A_CLK>;
+      };
+
+      snoc: interconnect@580000 {
+            reg = <0x00580000 0x23080>;
+            compatible = "qcom,qcs404-snoc";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+                     <&rpmcc RPM_SMD_SNOC_A_CLK>;
+      };

Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml

@@ -52,9 +52,7 @@ required:
   - interrupts
   - interrupt-controller
 
-# FIXME: We should set it, but it would report all the generic
-# properties as additional properties.
-# additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml

@@ -138,6 +138,7 @@ properties:
       containing a set of sub-nodes.
     patternProperties:
       "^interrupt-partition-[0-9]+$":
+        type: object
         properties:
           affinity:
             $ref: /schemas/types.yaml#/definitions/phandle-array

Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt

-DT bindings for the R-Mobile/R-Car/RZ/G interrupt controller
-
-Required properties:
-
-- compatible: must be "renesas,irqc-<soctype>" or "renesas,intc-ex-<soctype>",
-	      and "renesas,irqc" as fallback.
-  Examples with soctypes are:
-    - "renesas,irqc-r8a73a4" (R-Mobile APE6)
-    - "renesas,irqc-r8a7743" (RZ/G1M)
-    - "renesas,irqc-r8a7744" (RZ/G1N)
-    - "renesas,irqc-r8a7745" (RZ/G1E)
-    - "renesas,irqc-r8a77470" (RZ/G1C)
-    - "renesas,irqc-r8a7790" (R-Car H2)
-    - "renesas,irqc-r8a7791" (R-Car M2-W)
-    - "renesas,irqc-r8a7792" (R-Car V2H)
-    - "renesas,irqc-r8a7793" (R-Car M2-N)
-    - "renesas,irqc-r8a7794" (R-Car E2)
-    - "renesas,intc-ex-r8a774a1" (RZ/G2M)
-    - "renesas,intc-ex-r8a774c0" (RZ/G2E)
-    - "renesas,intc-ex-r8a7795" (R-Car H3)
-    - "renesas,intc-ex-r8a7796" (R-Car M3-W)
-    - "renesas,intc-ex-r8a77965" (R-Car M3-N)
-    - "renesas,intc-ex-r8a77970" (R-Car V3M)
-    - "renesas,intc-ex-r8a77980" (R-Car V3H)
-    - "renesas,intc-ex-r8a77990" (R-Car E3)
-    - "renesas,intc-ex-r8a77995" (R-Car D3)
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
-  interrupts.txt in this directory
-- clocks: Must contain a reference to the functional clock.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
-  properties
-
-Example:
-
-	irqc0: interrupt-controller@e61c0000 {
-		compatible = "renesas,irqc-r8a7790", "renesas,irqc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
-	};

Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DT bindings for the R-Mobile/R-Car/RZ/G interrupt controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,irqc-r8a73a4        # R-Mobile APE6
+          - renesas,irqc-r8a7743        # RZ/G1M
+          - renesas,irqc-r8a7744        # RZ/G1N
+          - renesas,irqc-r8a7745        # RZ/G1E
+          - renesas,irqc-r8a77470       # RZ/G1C
+          - renesas,irqc-r8a7790        # R-Car H2
+          - renesas,irqc-r8a7791        # R-Car M2-W
+          - renesas,irqc-r8a7792        # R-Car V2H
+          - renesas,irqc-r8a7793        # R-Car M2-N
+          - renesas,irqc-r8a7794        # R-Car E2
+          - renesas,intc-ex-r8a774a1    # RZ/G2M
+          - renesas,intc-ex-r8a774b1    # RZ/G2N
+          - renesas,intc-ex-r8a774c0    # RZ/G2E
+          - renesas,intc-ex-r8a7795     # R-Car H3
+          - renesas,intc-ex-r8a7796     # R-Car M3-W
+          - renesas,intc-ex-r8a77965    # R-Car M3-N
+          - renesas,intc-ex-r8a77970    # R-Car V3M
+          - renesas,intc-ex-r8a77980    # R-Car V3H
+          - renesas,intc-ex-r8a77990    # R-Car E3
+          - renesas,intc-ex-r8a77995    # R-Car D3
+      - const: renesas,irqc
+
+  '#interrupt-cells':
+    # an interrupt index and flags, as defined in interrupts.txt in
+    # this directory
+    const: 2
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    irqc0: interrupt-controller@e61c0000 {
+        compatible = "renesas,irqc-r8a7790", "renesas,irqc";
+        #interrupt-cells = <2>;
+        interrupt-controller;
+        reg = <0 0xe61c0000 0 0x200>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 407>;
+    };

Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt

-STM32 External Interrupt Controller
-
-Required properties:
-
-- compatible: Should be:
-    "st,stm32-exti"
-    "st,stm32h7-exti"
-    "st,stm32mp1-exti"
-- reg: Specifies base physical address and size of the registers
-- interrupt-controller: Indentifies the node as an interrupt controller
-- #interrupt-cells: Specifies the number of cells to encode an interrupt
-  specifier, shall be 2
-- interrupts: interrupts references to primary interrupt controller
-  (only needed for exti controller with multiple exti under
-  same parent interrupt: st,stm32-exti and st,stm32h7-exti)
-
-Optional properties:
-
-- hwlocks: reference to a phandle of a hardware spinlock provider node.
-
-Example:
-
-exti: interrupt-controller@40013c00 {
-	compatible = "st,stm32-exti";
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	reg = <0x40013C00 0x400>;
-	interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
-};

Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 External Interrupt Controller Device Tree Bindings
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@st.com>
+  - Ludovic Barre <ludovic.barre@st.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - st,stm32-exti
+          - st,stm32h7-exti
+      - items:
+        - enum:
+          - st,stm32mp1-exti
+        - const: syscon
+
+  "#interrupt-cells":
+    const: 2
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  hwlocks:
+    maxItems: 1
+    description:
+      Reference to a phandle of a hardware spinlock provider node.
+
+  interrupts:
+    description:
+      Interrupts references to primary interrupt controller
+
+required:
+  - "#interrupt-cells"
+  - compatible
+  - reg
+  - interrupt-controller
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32-exti
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 32
+      required:
+        - interrupts
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32h7-exti
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 96
+      required:
+        - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    //Example 1
+    exti1: interrupt-controller@5000d000 {
+        compatible = "st,stm32mp1-exti", "syscon";
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        reg = <0x5000d000 0x400>;
+    };
+
+    //Example 2
+    exti2: interrupt-controller@40013c00 {
+        compatible = "st,stm32-exti";
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        reg = <0x40013C00 0x400>;
+        interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+    };
+
+...

Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt

-* ARM SMMUv3 Architecture Implementation
-
-The SMMUv3 architecture is a significant departure from previous
-revisions, replacing the MMIO register interface with in-memory command
-and event queues and adding support for the ATS and PRI components of
-the PCIe specification.
-
-** SMMUv3 required properties:
-
-- compatible        : Should include:
-
-                      * "arm,smmu-v3" for any SMMUv3 compliant
-                        implementation. This entry should be last in the
-                        compatible list.
-
-- reg               : Base address and size of the SMMU.
-
-- interrupts        : Non-secure interrupt list describing the wired
-                      interrupt sources corresponding to entries in
-                      interrupt-names. If no wired interrupts are
-                      present then this property may be omitted.
-
-- interrupt-names   : When the interrupts property is present, should
-                      include the following:
-                      * "eventq"    - Event Queue not empty
-                      * "priq"      - PRI Queue not empty
-                      * "cmdq-sync" - CMD_SYNC complete
-                      * "gerror"    - Global Error activated
-                      * "combined"  - The combined interrupt is optional,
-				      and should only be provided if the
-				      hardware supports just a single,
-				      combined interrupt line.
-				      If provided, then the combined interrupt
-				      will be used in preference to any others.
-
-- #iommu-cells      : See the generic IOMMU binding described in
-                        devicetree/bindings/pci/pci-iommu.txt
-                      for details. For SMMUv3, must be 1, with each cell
-                      describing a single stream ID. All possible stream
-                      IDs which a device may emit must be described.
-
-** SMMUv3 optional properties:
-
-- dma-coherent      : Present if DMA operations made by the SMMU (page
-                      table walks, stream table accesses etc) are cache
-                      coherent with the CPU.
-
-                      NOTE: this only applies to the SMMU itself, not
-                      masters connected upstream of the SMMU.
-
-- msi-parent        : See the generic MSI binding described in
-                        devicetree/bindings/interrupt-controller/msi.txt
-                      for a description of the msi-parent property.
-
-- hisilicon,broken-prefetch-cmd
-                    : Avoid sending CMD_PREFETCH_* commands to the SMMU.
-
-- cavium,cn9900-broken-page1-regspace
-                    : Replaces all page 1 offsets used for EVTQ_PROD/CONS,
-		      PRIQ_PROD/CONS register access with page 0 offsets.
-		      Set for Cavium ThunderX2 silicon that doesn't support
-		      SMMU page1 register space.
-
-** Example
-
-        smmu@2b400000 {
-                compatible = "arm,smmu-v3";
-                reg = <0x0 0x2b400000 0x0 0x20000>;
-                interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
-                             <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
-                             <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
-                             <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>;
-                interrupt-names = "eventq", "priq", "cmdq-sync", "gerror";
-                dma-coherent;
-                #iommu-cells = <1>;
-                msi-parent = <&its 0xff0000>;
-        };

Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/arm,smmu-v3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM SMMUv3 Architecture Implementation
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+  - Robin Murphy <Robin.Murphy@arm.com>
+
+description: |+
+  The SMMUv3 architecture is a significant departure from previous
+  revisions, replacing the MMIO register interface with in-memory command
+  and event queues and adding support for the ATS and PRI components of
+  the PCIe specification.
+
+properties:
+  $nodename:
+    pattern: "^iommu@[0-9a-f]*"
+  compatible:
+    const: arm,smmu-v3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    oneOf:
+      - const: combined
+        description:
+          The combined interrupt is optional, and should only be provided if the
+          hardware supports just a single, combined interrupt line.
+          If provided, then the combined interrupt will be used in preference to
+          any others.
+      - minItems: 2
+        maxItems: 4
+        items:
+          - const: eventq     # Event Queue not empty
+          - const: gerror     # Global Error activated
+          - const: priq       # PRI Queue not empty
+          - const: cmdq-sync  # CMD_SYNC complete
+
+  '#iommu-cells':
+    const: 1
+
+  dma-coherent:
+    description: |
+      Present if page table walks made by the SMMU are cache coherent with the
+      CPU.
+
+      NOTE: this only applies to the SMMU itself, not masters connected
+      upstream of the SMMU.
+
+  msi-parent: true
+
+  hisilicon,broken-prefetch-cmd:
+    type: boolean
+    description: Avoid sending CMD_PREFETCH_* commands to the SMMU.
+
+  cavium,cn9900-broken-page1-regspace:
+    type: boolean
+    description:
+      Replaces all page 1 offsets used for EVTQ_PROD/CONS, PRIQ_PROD/CONS
+      register access with page 0 offsets. Set for Cavium ThunderX2 silicon that
+      doesn't support SMMU page1 register space.
+
+required:
+  - compatible
+  - reg
+  - '#iommu-cells'
+
+additionalProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    iommu@2b400000 {
+            compatible = "arm,smmu-v3";
+            reg = <0x2b400000 0x20000>;
+            interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+            dma-coherent;
+            #iommu-cells = <1>;
+            msi-parent = <&its 0xff0000>;
+    };

Documentation/devicetree/bindings/iommu/arm,smmu.txt

-* ARM System MMU Architecture Implementation
-
-ARM SoCs may contain an implementation of the ARM System Memory
-Management Unit Architecture, which can be used to provide 1 or 2 stages
-of address translation to bus masters external to the CPU.
-
-The SMMU may also raise interrupts in response to various fault
-conditions.
-
-** System MMU required properties:
-
-- compatible    : Should be one of:
-
-                        "arm,smmu-v1"
-                        "arm,smmu-v2"
-                        "arm,mmu-400"
-                        "arm,mmu-401"
-                        "arm,mmu-500"
-                        "cavium,smmu-v2"
-                        "qcom,smmu-v2"
-
-                  depending on the particular implementation and/or the
-                  version of the architecture implemented.
-
-                  Qcom SoCs must contain, as below, SoC-specific compatibles
-                  along with "qcom,smmu-v2":
-                  "qcom,msm8996-smmu-v2", "qcom,smmu-v2",
-                  "qcom,sdm845-smmu-v2", "qcom,smmu-v2".
-
-                  Qcom SoCs implementing "arm,mmu-500" must also include,
-                  as below, SoC-specific compatibles:
-                  "qcom,sdm845-smmu-500", "arm,mmu-500"
-
-- reg           : Base address and size of the SMMU.
-
-- #global-interrupts : The number of global interrupts exposed by the
-                       device.
-
-- interrupts    : Interrupt list, with the first #global-irqs entries
-                  corresponding to the global interrupts and any
-                  following entries corresponding to context interrupts,
-                  specified in order of their indexing by the SMMU.
-
-                  For SMMUv2 implementations, there must be exactly one
-                  interrupt per context bank. In the case of a single,
-                  combined interrupt, it must be listed multiple times.
-
-- #iommu-cells  : See Documentation/devicetree/bindings/iommu/iommu.txt
-                  for details. With a value of 1, each IOMMU specifier
-                  represents a distinct stream ID emitted by that device
-                  into the relevant SMMU.
-
-                  SMMUs with stream matching support and complex masters
-                  may use a value of 2, where the second cell of the
-                  IOMMU specifier represents an SMR mask to combine with
-                  the ID in the first cell.  Care must be taken to ensure
-                  the set of matched IDs does not result in conflicts.
-
-** System MMU optional properties:
-
-- dma-coherent  : Present if page table walks made by the SMMU are
-                  cache coherent with the CPU.
-
-                  NOTE: this only applies to the SMMU itself, not
-                  masters connected upstream of the SMMU.
-
-- calxeda,smmu-secure-config-access : Enable proper handling of buggy
-                  implementations that always use secure access to
-                  SMMU configuration registers. In this case non-secure
-                  aliases of secure registers have to be used during
-                  SMMU configuration.
-
-- stream-match-mask : For SMMUs supporting stream matching and using
-                  #iommu-cells = <1>, specifies a mask of bits to ignore
-		  when matching stream IDs (e.g. this may be programmed
-		  into the SMRn.MASK field of every stream match register
-		  used). For cases where it is desirable to ignore some
-                  portion of every Stream ID (e.g. for certain MMU-500
-                  configurations given globally unique input IDs). This
-                  property is not valid for SMMUs using stream indexing,
-                  or using stream matching with #iommu-cells = <2>, and
-                  may be ignored if present in such cases.
-
-- clock-names:    List of the names of clocks input to the device. The
-                  required list depends on particular implementation and
-                  is as follows:
-                  - for "qcom,smmu-v2":
-                    - "bus": clock required for downstream bus access and
-                             for the smmu ptw,
-                    - "iface": clock required to access smmu's registers
-                               through the TCU's programming interface.
-                  - unspecified for other implementations.
-
-- clocks:         Specifiers for all clocks listed in the clock-names property,
-                  as per generic clock bindings.
-
-- power-domains:  Specifiers for power domains required to be powered on for
-                  the SMMU to operate, as per generic power domain bindings.
-
-** Deprecated properties:
-
-- mmu-masters (deprecated in favour of the generic "iommus" binding) :
-                  A list of phandles to device nodes representing bus
-                  masters for which the SMMU can provide a translation
-                  and their corresponding Stream IDs. Each device node
-                  linked from this list must have a "#stream-id-cells"
-                  property, indicating the number of Stream ID
-                  arguments associated with its phandle.
-
-** Examples:
-
-        /* SMMU with stream matching or stream indexing */
-        smmu1: iommu {
-                compatible = "arm,smmu-v1";
-                reg = <0xba5e0000 0x10000>;
-                #global-interrupts = <2>;
-                interrupts = <0 32 4>,
-                             <0 33 4>,
-                             <0 34 4>, /* This is the first context interrupt */
-                             <0 35 4>,
-                             <0 36 4>,
-                             <0 37 4>;
-                #iommu-cells = <1>;
-        };
-
-        /* device with two stream IDs, 0 and 7 */
-        master1 {
-                iommus = <&smmu1 0>,
-                         <&smmu1 7>;
-        };
-
-
-        /* SMMU with stream matching */
-        smmu2: iommu {
-                ...
-                #iommu-cells = <2>;
-        };
-
-        /* device with stream IDs 0 and 7 */
-        master2 {
-                iommus = <&smmu2 0 0>,
-                         <&smmu2 7 0>;
-        };
-
-        /* device with stream IDs 1, 17, 33 and 49 */
-        master3 {
-                iommus = <&smmu2 1 0x30>;
-        };
-
-
-        /* ARM MMU-500 with 10-bit stream ID input configuration */
-        smmu3: iommu {
-                compatible = "arm,mmu-500", "arm,smmu-v2";
-                ...
-                #iommu-cells = <1>;
-                /* always ignore appended 5-bit TBU number */
-                stream-match-mask = 0x7c00;
-        };
-
-        bus {
-                /* bus whose child devices emit one unique 10-bit stream
-                   ID each, but may master through multiple SMMU TBUs */
-                iommu-map = <0 &smmu3 0 0x400>;
-                ...
-        };
-
-	/* Qcom's arm,smmu-v2 implementation */
-	smmu4: iommu@d00000 {
-		compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-		reg = <0xd00000 0x10000>;
-
-		#global-interrupts = <1>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
-		#iommu-cells = <1>;
-		power-domains = <&mmcc MDSS_GDSC>;
-
-		clocks = <&mmcc SMMU_MDP_AXI_CLK>,
-			 <&mmcc SMMU_MDP_AHB_CLK>;
-		clock-names = "bus", "iface";
-	};

Documentation/devicetree/bindings/iommu/arm,smmu.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/arm,smmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM System MMU Architecture Implementation
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+  - Robin Murphy <Robin.Murphy@arm.com>
+
+description: |+
+  ARM SoCs may contain an implementation of the ARM System Memory
+  Management Unit Architecture, which can be used to provide 1 or 2 stages
+  of address translation to bus masters external to the CPU.
+
+  The SMMU may also raise interrupts in response to various fault
+  conditions.
+
+properties:
+  $nodename:
+    pattern: "^iommu@[0-9a-f]*"
+  compatible:
+    oneOf:
+      - description: Qcom SoCs implementing "arm,smmu-v2"
+        items:
+          - enum:
+              - qcom,msm8996-smmu-v2
+              - qcom,msm8998-smmu-v2
+              - qcom,sdm845-smmu-v2
+          - const: qcom,smmu-v2
+
+      - description: Qcom SoCs implementing "arm,mmu-500"
+        items:
+          - enum:
+              - qcom,sc7180-smmu-500
+              - qcom,sdm845-smmu-500
+          - const: arm,mmu-500
+      - items:
+          - const: arm,mmu-500
+          - const: arm,smmu-v2
+      - items:
+          - const: arm,mmu-401
+          - const: arm,smmu-v1
+      - enum:
+          - arm,smmu-v1
+          - arm,smmu-v2
+          - arm,mmu-400
+          - arm,mmu-401
+          - arm,mmu-500
+          - cavium,smmu-v2
+
+  reg:
+    maxItems: 1
+
+  '#global-interrupts':
+    description: The number of global interrupts exposed by the device.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 260   # 2 secure, 2 non-secure, and up to 256 perf counters
+
+  '#iommu-cells':
+    enum: [ 1, 2 ]
+    description: |
+      See Documentation/devicetree/bindings/iommu/iommu.txt for details. With a
+      value of 1, each IOMMU specifier represents a distinct stream ID emitted
+      by that device into the relevant SMMU.
+
+      SMMUs with stream matching support and complex masters may use a value of
+      2, where the second cell of the IOMMU specifier represents an SMR mask to
+      combine with the ID in the first cell.  Care must be taken to ensure the
+      set of matched IDs does not result in conflicts.
+
+  interrupts:
+    minItems: 1
+    maxItems: 388   # 260 plus 128 contexts
+    description: |
+      Interrupt list, with the first #global-interrupts entries corresponding to
+      the global interrupts and any following entries corresponding to context
+      interrupts, specified in order of their indexing by the SMMU.
+
+      For SMMUv2 implementations, there must be exactly one interrupt per
+      context bank. In the case of a single, combined interrupt, it must be
+      listed multiple times.
+
+  dma-coherent:
+    description: |
+      Present if page table walks made by the SMMU are cache coherent with the
+      CPU.
+
+      NOTE: this only applies to the SMMU itself, not masters connected
+      upstream of the SMMU.
+
+  calxeda,smmu-secure-config-access:
+    type: boolean
+    description:
+      Enable proper handling of buggy implementations that always use secure
+      access to SMMU configuration registers. In this case non-secure aliases of
+      secure registers have to be used during SMMU configuration.
+
+  stream-match-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      For SMMUs supporting stream matching and using #iommu-cells = <1>,
+      specifies a mask of bits to ignore when matching stream IDs (e.g. this may
+      be programmed into the SMRn.MASK field of every stream match register
+      used). For cases where it is desirable to ignore some portion of every
+      Stream ID (e.g. for certain MMU-500 configurations given globally unique
+      input IDs). This property is not valid for SMMUs using stream indexing, or
+      using stream matching with #iommu-cells = <2>, and may be ignored if
+      present in such cases.
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+
+  clocks:
+    items:
+      - description: bus clock required for downstream bus access and for the
+          smmu ptw
+      - description: interface clock required to access smmu's registers
+          through the TCU's programming interface.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#global-interrupts'
+  - '#iommu-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |+
+    /* SMMU with stream matching or stream indexing */
+    smmu1: iommu@ba5e0000 {
+            compatible = "arm,smmu-v1";
+            reg = <0xba5e0000 0x10000>;
+            #global-interrupts = <2>;
+            interrupts = <0 32 4>,
+                         <0 33 4>,
+                         <0 34 4>, /* This is the first context interrupt */
+                         <0 35 4>,
+                         <0 36 4>,
+                         <0 37 4>;
+            #iommu-cells = <1>;
+    };
+
+    /* device with two stream IDs, 0 and 7 */
+    master1 {
+            iommus = <&smmu1 0>,
+                     <&smmu1 7>;
+    };
+
+
+    /* SMMU with stream matching */
+    smmu2: iommu@ba5f0000 {
+            compatible = "arm,smmu-v1";
+            reg = <0xba5f0000 0x10000>;
+            #global-interrupts = <2>;
+            interrupts = <0 38 4>,
+                         <0 39 4>,
+                         <0 40 4>, /* This is the first context interrupt */
+                         <0 41 4>,
+                         <0 42 4>,
+                         <0 43 4>;
+            #iommu-cells = <2>;
+    };
+
+    /* device with stream IDs 0 and 7 */
+    master2 {
+            iommus = <&smmu2 0 0>,
+                     <&smmu2 7 0>;
+    };
+
+    /* device with stream IDs 1, 17, 33 and 49 */
+    master3 {
+            iommus = <&smmu2 1 0x30>;
+    };
+
+
+    /* ARM MMU-500 with 10-bit stream ID input configuration */
+    smmu3: iommu@ba600000 {
+            compatible = "arm,mmu-500", "arm,smmu-v2";
+            reg = <0xba600000 0x10000>;
+            #global-interrupts = <2>;
+            interrupts = <0 44 4>,
+                         <0 45 4>,
+                         <0 46 4>, /* This is the first context interrupt */
+                         <0 47 4>,
+                         <0 48 4>,
+                         <0 49 4>;
+            #iommu-cells = <1>;
+            /* always ignore appended 5-bit TBU number */
+            stream-match-mask = <0x7c00>;
+    };
+
+    bus {
+            /* bus whose child devices emit one unique 10-bit stream
+               ID each, but may master through multiple SMMU TBUs */
+            iommu-map = <0 &smmu3 0 0x400>;
+
+
+    };
+
+  - |+
+    /* Qcom's arm,smmu-v2 implementation */
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    smmu4: iommu@d00000 {
+      compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+      reg = <0xd00000 0x10000>;
+
+      #global-interrupts = <1>;
+      interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+      #iommu-cells = <1>;
+      power-domains = <&mmcc 0>;
+
+      clocks = <&mmcc 123>,
+        <&mmcc 124>;
+      clock-names = "bus", "iface";
+    };

Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt

-Samsung Exynos IOMMU H/W, System MMU (System Memory Management Unit)
-
-Samsung's Exynos architecture contains System MMUs that enables scattered
-physical memory chunks visible as a contiguous region to DMA-capable peripheral
-devices like MFC, FIMC, FIMD, GScaler, FIMC-IS and so forth.
-
-System MMU is an IOMMU and supports identical translation table format to
-ARMv7 translation tables with minimum set of page properties including access
-permissions, shareability and security protection. In addition, System MMU has
-another capabilities like L2 TLB or block-fetch buffers to minimize translation
-latency.
-
-System MMUs are in many to one relation with peripheral devices, i.e. single
-peripheral device might have multiple System MMUs (usually one for each bus
-master), but one System MMU can handle transactions from only one peripheral
-device. The relation between a System MMU and the peripheral device needs to be
-defined in device node of the peripheral device.
-
-MFC in all Exynos SoCs and FIMD, M2M Scalers and G2D in Exynos5420 has 2 System
-MMUs.
-* MFC has one System MMU on its left and right bus.
-* FIMD in Exynos5420 has one System MMU for window 0 and 4, the other system MMU
-  for window 1, 2 and 3.
-* M2M Scalers and G2D in Exynos5420 has one System MMU on the read channel and
-  the other System MMU on the write channel.
-
-For information on assigning System MMU controller to its peripheral devices,
-see generic IOMMU bindings.
-
-Required properties:
-- compatible: Should be "samsung,exynos-sysmmu"
-- reg: A tuple of base address and size of System MMU registers.
-- #iommu-cells: Should be <0>.
-- interrupts: An interrupt specifier for interrupt signal of System MMU,
-	      according to the format defined by a particular interrupt
-	      controller.
-- clock-names: Should be "sysmmu" or a pair of "aclk" and "pclk" to gate
-	       SYSMMU core clocks.
-	       Optional "master" if the clock to the System MMU is gated by
-	       another gate clock other core  (usually main gate clock
-	       of peripheral device this SYSMMU belongs to).
-- clocks: Phandles for respective clocks described by clock-names.
-- power-domains: Required if the System MMU is needed to gate its power.
-	  Please refer to the following document:
-	  Documentation/devicetree/bindings/power/pd-samsung.txt
-
-Examples:
-	gsc_0: gsc@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-		iommus = <&sysmmu_gsc0>;
-	};
-
-	sysmmu_gsc0: sysmmu@13e80000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E80000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		power-domains = <&pd_gsc>;
-		#iommu-cells = <0>;
-	};

Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/samsung,sysmmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos IOMMU H/W, System MMU (System Memory Management Unit)
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+
+description: |+
+  Samsung's Exynos architecture contains System MMUs that enables scattered
+  physical memory chunks visible as a contiguous region to DMA-capable peripheral
+  devices like MFC, FIMC, FIMD, GScaler, FIMC-IS and so forth.
+
+  System MMU is an IOMMU and supports identical translation table format to
+  ARMv7 translation tables with minimum set of page properties including access
+  permissions, shareability and security protection. In addition, System MMU has
+  another capabilities like L2 TLB or block-fetch buffers to minimize translation
+  latency.
+
+  System MMUs are in many to one relation with peripheral devices, i.e. single
+  peripheral device might have multiple System MMUs (usually one for each bus
+  master), but one System MMU can handle transactions from only one peripheral
+  device. The relation between a System MMU and the peripheral device needs to be
+  defined in device node of the peripheral device.
+
+  MFC in all Exynos SoCs and FIMD, M2M Scalers and G2D in Exynos5420 has 2 System
+  MMUs.
+  * MFC has one System MMU on its left and right bus.
+  * FIMD in Exynos5420 has one System MMU for window 0 and 4, the other system MMU
+    for window 1, 2 and 3.
+  * M2M Scalers and G2D in Exynos5420 has one System MMU on the read channel and
+    the other System MMU on the write channel.
+
+  For information on assigning System MMU controller to its peripheral devices,
+  see generic IOMMU bindings.
+
+properties:
+  compatible:
+    const: samsung,exynos-sysmmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:
+        - const: sysmmu
+      - items:
+        - const: sysmmu
+        - const: master
+      - items:
+        - const: aclk
+        - const: pclk
+
+  "#iommu-cells":
+    const: 0
+
+  power-domains:
+    description: |
+      Required if the System MMU is needed to gate its power.
+      Please refer to the following document:
+      Documentation/devicetree/bindings/power/pd-samsung.yaml
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#iommu-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+
+    gsc_0: scaler@13e00000 {
+      compatible = "samsung,exynos5-gsc";
+      reg = <0x13e00000 0x1000>;
+      interrupts = <0 85 0>;
+      power-domains = <&pd_gsc>;
+      clocks = <&clock CLK_GSCL0>;
+      clock-names = "gscl";
+      iommus = <&sysmmu_gsc0>;
+    };
+
+    sysmmu_gsc0: iommu@13e80000 {
+      compatible = "samsung,exynos-sysmmu";
+      reg = <0x13E80000 0x1000>;
+      interrupt-parent = <&combiner>;
+      interrupts = <2 0>;
+      clock-names = "sysmmu", "master";
+      clocks = <&clock CLK_SMMU_GSCL0>,
+               <&clock CLK_GSCL0>;
+      power-domains = <&pd_gsc>;
+      #iommu-cells = <0>;
+    };
+

Documentation/devicetree/bindings/leds/leds-max77650.txt

-LED driver for MAX77650 PMIC from Maxim Integrated.
-
-This module is part of the MAX77650 MFD device. For more details
-see Documentation/devicetree/bindings/mfd/max77650.txt.
-
-The LED controller is represented as a sub-node of the PMIC node on
-the device tree.
-
-This device has three current sinks.
-
-Required properties:
---------------------
-- compatible:		Must be "maxim,max77650-led"
-- #address-cells:	Must be <1>.
-- #size-cells:		Must be <0>.
-
-Each LED is represented as a sub-node of the LED-controller node. Up to
-three sub-nodes can be defined.
-
-Required properties of the sub-node:
-------------------------------------
-
-- reg:			Must be <0>, <1> or <2>.
-
-Optional properties of the sub-node:
-------------------------------------
-
-- label:		See Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger: See Documentation/devicetree/bindings/leds/common.txt
-
-For more details, please refer to the generic GPIO DT binding document
-<devicetree/bindings/gpio/gpio.txt>.
-
-Example:
---------
-
-	leds {
-		compatible = "maxim,max77650-led";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@0 {
-			reg = <0>;
-			label = "blue:usr0";
-		};
-
-		led@1 {
-			reg = <1>;
-			label = "red:usr1";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led@2 {
-			reg = <2>;
-			label = "green:usr2";
-		};
-	};

Documentation/devicetree/bindings/leds/leds-max77650.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-max77650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+  This module is part of the MAX77650 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+  The LED controller is represented as a sub-node of the PMIC node on
+  the device tree.
+
+  This device has three current sinks.
+
+properties:
+  compatible:
+    const: maxim,max77650-led
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-2]$":
+    type: object
+    description: |
+      Properties for a single LED.
+
+    properties:
+      reg:
+        description:
+          Index of the LED.
+        minimum: 0
+        maximum: 2
+
+      label: true
+
+      linux,default-trigger: true
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"

Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mailbox/st,stm32-ipcc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 IPC controller bindings
+
+description:
+  The IPCC block provides a non blocking signaling mechanism to post and
+  retrieve messages in an atomic way between two processors.
+  It provides the signaling for N bidirectionnal channels. The number of
+  channels (N) can be read from a dedicated register.
+
+maintainers:
+  - Fabien Dessenne <fabien.dessenne@st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1-ipcc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+     maxItems: 1
+
+  interrupts:
+    items:
+      - description: rx channel occupied
+      - description: tx channel free
+      - description: wakeup source
+    minItems: 2
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: rx
+      - const: tx
+      - const: wakeup
+    minItems: 2
+    maxItems: 3
+
+  wakeup-source: true
+
+  "#mbox-cells":
+    const: 1
+
+  st,proc-id:
+    description: Processor id using the mailbox (0 or 1)
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 0, 1 ]
+
+required:
+  - compatible
+  - reg
+  - st,proc-id
+  - clocks
+  - interrupt-names
+  - "#mbox-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    ipcc: mailbox@4c001000 {
+      compatible = "st,stm32mp1-ipcc";
+      #mbox-cells = <1>;
+      reg = <0x4c001000 0x400>;
+      st,proc-id = <0>;
+      interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
+      		      <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
+      		      <&aiec 62 1>;
+      interrupt-names = "rx", "tx", "wakeup";
+      clocks = <&rcc_clk IPCC>;
+      wakeup-source;
+    };
+
+...

Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt

-* STMicroelectronics STM32 IPCC (Inter-Processor Communication Controller)
-
-The IPCC block provides a non blocking signaling mechanism to post and
-retrieve messages in an atomic way between two processors.
-It provides the signaling for N bidirectionnal channels. The number of channels
-(N) can be read from a dedicated register.
-
-Required properties:
-- compatible:   Must be "st,stm32mp1-ipcc"
-- reg:          Register address range (base address and length)
-- st,proc-id:   Processor id using the mailbox (0 or 1)
-- clocks:       Input clock
-- interrupt-names: List of names for the interrupts described by the interrupt
-                   property. Must contain the following entries:
-                   - "rx"
-                   - "tx"
-                   - "wakeup"
-- interrupts:   Interrupt specifiers for "rx channel occupied", "tx channel
-                free" and "system wakeup".
-- #mbox-cells:  Number of cells required for the mailbox specifier. Must be 1.
-                The data contained in the mbox specifier of the "mboxes"
-                property in the client node is the mailbox channel index.
-
-Optional properties:
-- wakeup-source: Flag to indicate whether this device can wake up the system
-
-
-
-Example:
-	ipcc: mailbox@4c001000 {
-		compatible = "st,stm32mp1-ipcc";
-		#mbox-cells = <1>;
-		reg = <0x4c001000 0x400>;
-		st,proc-id = <0>;
-		interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
-				      <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
-				      <&aiec 62 1>;
-		interrupt-names = "rx", "tx", "wakeup";
-		clocks = <&rcc_clk IPCC>;
-		wakeup-source;
-	}
-
-Client:
-	mbox_test {
-		...
-		mboxes = <&ipcc 0>, <&ipcc 1>;
-	};

Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml

@@ -60,9 +60,7 @@ required:
   - clocks
   - clock-names
 
-# FIXME: We should set it, but it would report all the generic
-# properties as additional properties.
-# additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |