Merge branch 'omap-for-v3.8/fixes-for-merge-window' into omap-for-v3.8/fixes-for-merge-window-v2

arch/arm/boot/dts/Makefile

@@ -107,6 +107,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
 	omap4-panda.dtb \
+	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
 	omap4-var-som.dtb \
 	omap4-sdp.dtb \

arch/arm/boot/dts/omap2420-h4.dts

@@ -15,6 +15,6 @@ / {
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x84000000>; /* 64 MB */
+		reg = <0x80000000 0x4000000>; /* 64 MB */
 	};
 };

arch/arm/mach-omap2/Kconfig

@@ -26,6 +26,8 @@ config SOC_HAS_OMAP2_SDRC
 
 config SOC_HAS_REALTIME_COUNTER
 	bool "Real time free running counter"
+	depends on SOC_OMAP5
+	default y
 
 config ARCH_OMAP2
 	bool "TI OMAP2"
@@ -79,7 +81,6 @@ config SOC_OMAP5
 	select ARM_GIC
 	select CPU_V7
 	select HAVE_SMP
-	select SOC_HAS_REALTIME_COUNTER
 	select COMMON_CLK
 
 comment "OMAP Core Type"

arch/arm/mach-omap2/board-3430sdp.c

@@ -157,6 +157,7 @@ static struct omap_dss_device sdp3430_lcd_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= -1,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device sdp3430_dvi_device = {

arch/arm/mach-omap2/board-am3517evm.c

@@ -208,6 +208,7 @@ static struct omap_dss_device am3517_evm_tv_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= -1,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device am3517_evm_dvi_device = {

arch/arm/mach-omap2/board-cm-t35.c

@@ -241,6 +241,7 @@ static struct omap_dss_device cm_t35_lcd_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= CM_T35_DVI_EN_GPIO,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device cm_t35_dvi_device = {

arch/arm/mach-omap2/board-devkit8000.c

@@ -141,6 +141,7 @@ static struct omap_dss_device devkit8000_lcd_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= -1,
+	.i2c_bus_num		= 1,
 };
 
 static struct omap_dss_device devkit8000_dvi_device = {

arch/arm/mach-omap2/board-h4.c

@@ -27,14 +27,12 @@
 #include <linux/io.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/mfd/menelaus.h>
+#include <linux/omap-dma.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <linux/omap-dma.h>
-#include <plat/debug-devices.h>
-
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 
@@ -42,11 +40,9 @@
 #include "mux.h"
 #include "control.h"
 #include "gpmc.h"
+#include "gpmc-smc91x.h"
 
 #define H4_FLASH_CS	0
-#define H4_SMC91X_CS	1
-
-#define H4_ETHR_GPIO_IRQ		92
 
 #if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
 static const uint32_t board_matrix_keys[] = {
@@ -250,71 +246,31 @@ static u32 is_gpmc_muxed(void)
 		return 0;
 }
 
-static inline void __init h4_init_debug(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	unsigned int muxed, rate;
-	struct clk *gpmc_fck;
-
-	eth_cs	= H4_SMC91X_CS;
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
 
-	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
-	if (IS_ERR(gpmc_fck)) {
-		WARN_ON(1);
-		return;
-	}
-
-	clk_prepare_enable(gpmc_fck);
-	rate = clk_get_rate(gpmc_fck);
-	clk_disable_unprepare(gpmc_fck);
-	clk_put(gpmc_fck);
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 1,
+	.gpio_irq	= 92,
+	.flags		= GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL,
+};
 
+static void __init board_smc91x_init(void)
+{
 	if (is_gpmc_muxed())
-		muxed = 0x200;
-	else
-		muxed = 0;
-
-	/* Make sure CS1 timings are correct */
-	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
-			  0x00011000 | muxed);
-
-	if (rate >= 160000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else if (rate >= 130000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else {/* rate = 100000000 */
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
-	}
-
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		goto out;
-	}
+		board_smc91x_data.flags |= GPMC_MUX_ADD_DATA;
 
-	udelay(100);
+	omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT);
+	gpmc_smc91x_init(&board_smc91x_data);
+}
 
-	omap_mux_init_gpio(92, 0);
-	if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
-		gpmc_cs_free(eth_cs);
+#else
 
-out:
-	clk_disable_unprepare(gpmc_fck);
-	clk_put(gpmc_fck);
+static inline void board_smc91x_init(void)
+{
 }
 
+#endif
+
 static void __init h4_init_flash(void)
 {
 	unsigned long base;
@@ -371,6 +327,7 @@ static void __init omap_h4_init(void)
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 	h4_init_flash();
+	board_smc91x_init();
 
 	omap_display_init(&h4_dss_data);
 }

arch/arm/mach-omap2/board-omap3evm.c

@@ -240,6 +240,7 @@ static struct omap_dss_device omap3_evm_tv_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= OMAP3EVM_DVI_PANEL_EN_GPIO,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device omap3_evm_dvi_device = {

arch/arm/mach-omap2/board-omap3stalker.c

@@ -118,6 +118,7 @@ static struct omap_dss_device omap3_stalker_tv_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= DSS_ENABLE_GPIO,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device omap3_stalker_dvi_device = {

arch/arm/mach-omap2/mux.c

@@ -135,10 +135,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
 
 	old_mode = omap_mux_read(partition, gpio_mux->reg_offset);
 	mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
-	if (partition->flags & OMAP_MUX_GPIO_IN_MODE3)
-		mux_mode |= OMAP_MUX_MODE3;
-	else
-		mux_mode |= OMAP_MUX_MODE4;
+	mux_mode |= partition->gpio;
 	pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__,
 		 gpio_mux->muxnames[0], gpio, old_mode, mux_mode);
 	omap_mux_write(partition, mux_mode, gpio_mux->reg_offset);
@@ -800,7 +797,7 @@ int __init omap_mux_late_init(void)
 			struct omap_mux *m = &e->mux;
 			u16 mode = omap_mux_read(partition, m->reg_offset);
 
-			if (OMAP_MODE_GPIO(mode))
+			if (OMAP_MODE_GPIO(partition, mode))
 				continue;
 
 #ifndef CONFIG_DEBUG_FS
@@ -1065,7 +1062,7 @@ static void __init omap_mux_init_list(struct omap_mux_partition *partition,
 		}
 #else
 		/* Skip pins that are not muxed as GPIO by bootloader */
-		if (!OMAP_MODE_GPIO(omap_mux_read(partition,
+		if (!OMAP_MODE_GPIO(partition, omap_mux_read(partition,
 				    superset->reg_offset))) {
 			superset++;
 			continue;
@@ -1132,6 +1129,7 @@ int __init omap_mux_init(const char *name, u32 flags,
 
 	partition->name = name;
 	partition->flags = flags;
+	partition->gpio = flags & OMAP_MUX_MODE7;
 	partition->size = mux_size;
 	partition->phys = mux_pbase;
 	partition->base = ioremap(mux_pbase, mux_size);

arch/arm/mach-omap2/mux.h

@@ -58,7 +58,8 @@
 #define OMAP_PIN_OFF_INPUT_PULLDOWN	(OMAP_OFF_EN | OMAP_OFF_PULL_EN)
 #define OMAP_PIN_OFF_WAKEUPENABLE	OMAP_WAKEUP_EN
 
-#define OMAP_MODE_GPIO(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+#define OMAP_MODE_GPIO(partition, x)	(((x) & OMAP_MUX_MODE7) == \
+					  partition->gpio)
 #define OMAP_MODE_UART(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
 
 /* Flags for omapX_mux_init */
@@ -79,13 +80,20 @@
 /*
  * omap_mux_init flags definition:
  *
+ * OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control
+ *      register which includes values from 0-7.
  * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits.
  * The default value is 16 bits.
- * OMAP_MUX_GPIO_IN_MODE3: The GPIO is selected in mode3.
- * The default is mode4.
  */
-#define OMAP_MUX_REG_8BIT		(1 << 0)
-#define OMAP_MUX_GPIO_IN_MODE3		(1 << 1)
+#define OMAP_MUX_GPIO_IN_MODE0		OMAP_MUX_MODE0
+#define OMAP_MUX_GPIO_IN_MODE1		OMAP_MUX_MODE1
+#define OMAP_MUX_GPIO_IN_MODE2		OMAP_MUX_MODE2
+#define OMAP_MUX_GPIO_IN_MODE3		OMAP_MUX_MODE3
+#define OMAP_MUX_GPIO_IN_MODE4		OMAP_MUX_MODE4
+#define OMAP_MUX_GPIO_IN_MODE5		OMAP_MUX_MODE5
+#define OMAP_MUX_GPIO_IN_MODE6		OMAP_MUX_MODE6
+#define OMAP_MUX_GPIO_IN_MODE7		OMAP_MUX_MODE7
+#define OMAP_MUX_REG_8BIT		(1 << 3)
 
 /**
  * struct omap_board_data - board specific device data
@@ -105,6 +113,7 @@ struct omap_board_data {
  * struct mux_partition - contain partition related information
  * @name: name of the current partition
  * @flags: flags specific to this partition
+ * @gpio: gpio mux mode
  * @phys: physical address
  * @size: partition size
  * @base: virtual address after ioremap
@@ -114,6 +123,7 @@ struct omap_board_data {
 struct omap_mux_partition {
 	const char		*name;
 	u32			flags;
+	u32			gpio;
 	u32			phys;
 	u32			size;
 	void __iomem		*base;

arch/arm/mach-omap2/mux34xx.c

@@ -2053,7 +2053,7 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
 		return -EINVAL;
 	}
 
-	return omap_mux_init("core", 0,
+	return omap_mux_init("core", OMAP_MUX_GPIO_IN_MODE4,
 			     OMAP3_CONTROL_PADCONF_MUX_PBASE,
 			     OMAP3_CONTROL_PADCONF_MUX_SIZE,
 			     omap3_muxmodes, package_subset, board_subset,

arch/arm/mach-omap2/serial.c

@@ -27,8 +27,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/console.h>
 #include <linux/omap-dma.h>
-
-#include <plat/omap-serial.h>
+#include <linux/platform_data/serial-omap.h>
 
 #include "common.h"
 #include "omap_hwmod.h"

arch/arm/mach-omap2/timer.c

@@ -190,7 +190,7 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
  * kernel registering these devices remove them dynamically from the device
  * tree on boot.
  */
-void __init omap_dmtimer_init(void)
+static void __init omap_dmtimer_init(void)
 {
 	struct device_node *np;
 
@@ -210,7 +210,7 @@ void __init omap_dmtimer_init(void)
  *
  * Get the timer errata flags that are specific to the OMAP device being used.
  */
-u32 __init omap_dm_timer_get_errata(void)
+static u32 __init omap_dm_timer_get_errata(void)
 {
 	if (cpu_is_omap24xx())
 		return 0;
@@ -392,7 +392,7 @@ static struct of_device_id omap_counter_match[] __initdata = {
 };
 
 /* Setup free-running counter for clocksource */
-static int __init omap2_sync32k_clocksource_init(void)
+static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
 {
 	int ret;
 	struct device_node *np = NULL;

arch/arm/mach-omap2/usb-host.c

@@ -508,6 +508,10 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 	if (cpu_is_omap34xx()) {
 		setup_ehci_io_mux(pdata->port_mode);
 		setup_ohci_io_mux(pdata->port_mode);
+
+		if (omap_rev() <= OMAP3430_REV_ES2_1)
+			usbhs_data.single_ulpi_bypass = true;
+
 	} else if (cpu_is_omap44xx()) {
 		setup_4430ehci_io_mux(pdata->port_mode);
 		setup_4430ohci_io_mux(pdata->port_mode);

arch/arm/plat-omap/Makefile

@@ -11,7 +11,6 @@ obj-  :=
 # omap_device support (OMAP2+ only at the moment)
 
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
-obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
 i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
 obj-y += $(i2c-omap-m) $(i2c-omap-y)

arch/arm/plat-omap/debug-devices.c

-/*
- * linux/arch/arm/plat-omap/debug-devices.c
- *
- * Copyright (C) 2005 Nokia Corporation
- * Modified from mach-omap2/board-h4.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/smc91x.h>
-
-#include <plat/debug-devices.h>
-
-/* Many OMAP development platforms reuse the same "debug board"; these
- * platforms include H2, H3, H4, and Perseus2.
- */
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource led_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device led_device = {
-	.name		= "omap_dbg_led",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(led_resources),
-	.resource	= led_resources,
-};
-
-static struct platform_device *debug_devices[] __initdata = {
-	&smc91x_device,
-	&led_device,
-	/* ps2 kbd + mouse ports */
-	/* 4 extra uarts */
-	/* 6 input dip switches */
-	/* 8 output pins */
-};
-
-int __init debug_card_init(u32 addr, unsigned gpio)
-{
-	int	status;
-
-	smc91x_resources[0].start = addr + 0x300;
-	smc91x_resources[0].end   = addr + 0x30f;
-
-	smc91x_resources[1].start = gpio_to_irq(gpio);
-	smc91x_resources[1].end   = gpio_to_irq(gpio);
-
-	status = gpio_request(gpio, "SMC91x irq");
-	if (status < 0) {
-		printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
-		return status;
-	}
-	gpio_direction_input(gpio);
-
-	led_resources[0].start = addr;
-	led_resources[0].end   = addr + SZ_4K - 1;
-
-	return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices));
-}

arch/arm/plat-omap/include/plat/debug-devices.h

-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);

drivers/mfd/omap-usb-host.c

@@ -25,7 +25,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
-#include <plat/cpu.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/usb-omap.h>
 #include <linux/pm_runtime.h>
@@ -384,7 +383,7 @@ static void omap_usbhs_init(struct device *dev)
 			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
 
 		/* Bypass the TLL module for PHY mode operation */
-		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+		if (pdata->single_ulpi_bypass) {
 			dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
 			if (is_ehci_phy_mode(pdata->port_mode[0]) ||
 				is_ehci_phy_mode(pdata->port_mode[1]) ||

drivers/tty/serial/omap-serial.c

@@ -41,8 +41,7 @@
 #include <linux/of.h>
 #include <linux/gpio.h>
 #include <linux/pinctrl/consumer.h>
-
-#include <plat/omap-serial.h>
+#include <linux/platform_data/serial-omap.h>
 
 #define OMAP_MAX_HSUART_PORTS	6
 

include/linux/platform_data/usb-omap.h

@@ -59,6 +59,9 @@ struct usbhs_omap_platform_data {
 
 	struct ehci_hcd_omap_platform_data	*ehci_data;
 	struct ohci_hcd_omap_platform_data	*ohci_data;
+
+	/* OMAP3 <= ES2.1 have a single ulpi bypass control bit */
+	unsigned				single_ulpi_bypass:1;
 };
 
 /*-------------------------------------------------------------------------*/

include/video/omap-panel-tfp410.h

@@ -28,7 +28,7 @@ struct omap_dss_device;
  * @power_down_gpio: gpio number for PD pin (or -1 if not available)
  */
 struct tfp410_platform_data {
-	u16 i2c_bus_num;
+	int i2c_bus_num;
 	int power_down_gpio;
 };