ARC: timer: gfrc, rtc: deuglify big endian code

A standard "C" shift will be handled appropriately by the compiler
depending on the endian for the build. So we don't need the
explicit distinction in code
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

arch/arc/kernel/time.c

@@ -86,26 +86,19 @@ static int noinline arc_get_timer_clk(struct device_node *node)
 static cycle_t arc_read_gfrc(struct clocksource *cs)
 {
 	unsigned long flags;
-	union {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		struct { u32 h, l; };
-#else
-		struct { u32 l, h; };
-#endif
-		cycle_t  full;
-	} stamp;
+	u32 l, h;
 
 	local_irq_save(flags);
 
 	__mcip_cmd(CMD_GFRC_READ_LO, 0);
-	stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK);
+	l = read_aux_reg(ARC_REG_MCIP_READBACK);
 
 	__mcip_cmd(CMD_GFRC_READ_HI, 0);
-	stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK);
+	h = read_aux_reg(ARC_REG_MCIP_READBACK);
 
 	local_irq_restore(flags);
 
-	return stamp.full;
+	return (((cycle_t)h) << 32) | l;
 }
 
 static struct clocksource arc_counter_gfrc = {
@@ -143,14 +136,7 @@ CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
 static cycle_t arc_read_rtc(struct clocksource *cs)
 {
 	unsigned long status;
-	union {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		struct { u32 high, low; };
-#else
-		struct { u32 low, high; };
-#endif
-		cycle_t  full;
-	} stamp;
+	u32 l, h;
 
 	/*
 	 * hardware has an internal state machine which tracks readout of
@@ -159,12 +145,12 @@ static cycle_t arc_read_rtc(struct clocksource *cs)
 	 *  - high increments after low has been read
 	 */
 	do {
-		stamp.low = read_aux_reg(AUX_RTC_LOW);
-		stamp.high = read_aux_reg(AUX_RTC_HIGH);
+		l = read_aux_reg(AUX_RTC_LOW);
+		h = read_aux_reg(AUX_RTC_HIGH);
 		status = read_aux_reg(AUX_RTC_CTRL);
 	} while (!(status & _BITUL(31)));
 
-	return stamp.full;
+	return (((cycle_t)h) << 32) | l;
 }
 
 static struct clocksource arc_counter_rtc = {