drm/i915: Add chv port D TX wells

Add the TX wells for port D. The Punit subsystem numbers are a total
guess at this time. Also I'm not sure these even exist. Certainly the
Punit in current hardware doesn't deal with these.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -527,6 +527,10 @@ enum punit_power_well {
 	PUNIT_POWER_WELL_DPIO_RX0		= 10,
 	PUNIT_POWER_WELL_DPIO_RX1		= 11,
 	PUNIT_POWER_WELL_DPIO_CMN_D		= 12,
+	/* FIXME: guesswork below */
+	PUNIT_POWER_WELL_DPIO_TX_D_LANES_01	= 13,
+	PUNIT_POWER_WELL_DPIO_TX_D_LANES_23	= 14,
+	PUNIT_POWER_WELL_DPIO_RX2		= 15,
 
 	PUNIT_POWER_WELL_NUM,
 };

drivers/gpu/drm/i915/intel_pm.c

@@ -6616,6 +6616,15 @@ EXPORT_SYMBOL_GPL(i915_get_cdclk_freq);
 	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
 	BIT(POWER_DOMAIN_INIT))
 
+#define CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
 static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
 	.sync_hw = i9xx_always_on_power_well_noop,
 	.enable = i9xx_always_on_power_well_noop,
@@ -6833,6 +6842,20 @@ static struct i915_power_well chv_power_wells[] = {
 		.ops = &vlv_dpio_power_well_ops,
 		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
 	},
+	{
+		.name = "dpio-tx-d-01",
+		.domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS |
+			   CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_01,
+	},
+	{
+		.name = "dpio-tx-d-23",
+		.domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS |
+			   CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_23,
+	},
 #endif
 };