Commit 2cfd100b authored by Jonathan Corbet's avatar Jonathan Corbet

Merge branch 'doc/4.9' into docs-next

parents eb69548f fd5d2b83
......@@ -931,10 +931,8 @@ to "Closing".
1) Struct scatterlist requirements.
Don't invent the architecture specific struct scatterlist; just use
<asm-generic/scatterlist.h>. You need to enable
CONFIG_NEED_SG_DMA_LENGTH if the architecture supports IOMMUs
(including software IOMMU).
You need to enable CONFIG_NEED_SG_DMA_LENGTH if the architecture
supports IOMMUs (including software IOMMU).
2) ARCH_DMA_MINALIGN
......
......@@ -6,7 +6,7 @@
# To add a new book the only step required is to add the book to the
# list of DOCBOOKS.
DOCBOOKS := z8530book.xml device-drivers.xml \
DOCBOOKS := z8530book.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
writing_usb_driver.xml networking.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
......
This diff is collapsed.
Driver Basics
=============
Driver Entry and Exit points
----------------------------
.. kernel-doc:: include/linux/init.h
:internal:
Atomic and pointer manipulation
-------------------------------
.. kernel-doc:: arch/x86/include/asm/atomic.h
:internal:
Delaying, scheduling, and timer routines
----------------------------------------
.. kernel-doc:: include/linux/sched.h
:internal:
.. kernel-doc:: kernel/sched/core.c
:export:
.. kernel-doc:: kernel/sched/cpupri.c
:internal:
.. kernel-doc:: kernel/sched/fair.c
:internal:
.. kernel-doc:: include/linux/completion.h
:internal:
.. kernel-doc:: kernel/time/timer.c
:export:
Wait queues and Wake events
---------------------------
.. kernel-doc:: include/linux/wait.h
:internal:
.. kernel-doc:: kernel/sched/wait.c
:export:
High-resolution timers
----------------------
.. kernel-doc:: include/linux/ktime.h
:internal:
.. kernel-doc:: include/linux/hrtimer.h
:internal:
.. kernel-doc:: kernel/time/hrtimer.c
:export:
Workqueues and Kevents
----------------------
.. kernel-doc:: include/linux/workqueue.h
:internal:
.. kernel-doc:: kernel/workqueue.c
:export:
Internal Functions
------------------
.. kernel-doc:: kernel/exit.c
:internal:
.. kernel-doc:: kernel/signal.c
:internal:
.. kernel-doc:: include/linux/kthread.h
:internal:
.. kernel-doc:: kernel/kthread.c
:export:
Kernel objects manipulation
---------------------------
.. kernel-doc:: lib/kobject.c
:export:
Kernel utility functions
------------------------
.. kernel-doc:: include/linux/kernel.h
:internal:
.. kernel-doc:: kernel/printk/printk.c
:export:
.. kernel-doc:: kernel/panic.c
:export:
.. kernel-doc:: kernel/sys.c
:export:
.. kernel-doc:: kernel/rcu/srcu.c
:export:
.. kernel-doc:: kernel/rcu/tree.c
:export:
.. kernel-doc:: kernel/rcu/tree_plugin.h
:export:
.. kernel-doc:: kernel/rcu/update.c
:export:
Device Resource Management
--------------------------
.. kernel-doc:: drivers/base/devres.c
:export:
Frame Buffer Library
====================
The frame buffer drivers depend heavily on four data structures. These
structures are declared in include/linux/fb.h. They are fb_info,
fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs. The last
three can be made available to and from userland.
fb_info defines the current state of a particular video card. Inside
fb_info, there exists a fb_ops structure which is a collection of
needed functions to make fbdev and fbcon work. fb_info is only visible
to the kernel.
fb_var_screeninfo is used to describe the features of a video card
that are user defined. With fb_var_screeninfo, things such as depth
and the resolution may be defined.
The next structure is fb_fix_screeninfo. This defines the properties
of a card that are created when a mode is set and can't be changed
otherwise. A good example of this is the start of the frame buffer
memory. This "locks" the address of the frame buffer memory, so that it
cannot be changed or moved.
The last structure is fb_monospecs. In the old API, there was little
importance for fb_monospecs. This allowed for forbidden things such as
setting a mode of 800x600 on a fix frequency monitor. With the new API,
fb_monospecs prevents such things, and if used correctly, can prevent a
monitor from being cooked. fb_monospecs will not be useful until
kernels 2.5.x.
Frame Buffer Memory
-------------------
.. kernel-doc:: drivers/video/fbdev/core/fbmem.c
:export:
Frame Buffer Colormap
---------------------
.. kernel-doc:: drivers/video/fbdev/core/fbcmap.c
:export:
Frame Buffer Video Mode Database
--------------------------------
.. kernel-doc:: drivers/video/fbdev/core/modedb.c
:internal:
.. kernel-doc:: drivers/video/fbdev/core/modedb.c
:export:
Frame Buffer Macintosh Video Mode Database
------------------------------------------
.. kernel-doc:: drivers/video/fbdev/macmodes.c
:export:
Frame Buffer Fonts
------------------
Refer to the file lib/fonts/fonts.c for more information.
HSI - High-speed Synchronous Serial Interface
High Speed Synchronous Serial Interface (HSI)
=============================================
1. Introduction
~~~~~~~~~~~~~~~
Introduction
---------------
High Speed Syncronous Interface (HSI) is a fullduplex, low latency protocol,
that is optimized for die-level interconnect between an Application Processor
......@@ -17,25 +18,27 @@ signal can be used to wakeup the chips from standby modes. The signals are
commonly prefixed by AC for signals going from the application die to the
cellular die and CA for signals going the other way around.
+------------+ +---------------+
| Cellular | | Application |
| Die | | Die |
| | - - - - - - CAWAKE - - - - - - >| |
| T|------------ CADATA ------------>|R |
| X|------------ CAFLAG ------------>|X |
| |<----------- ACREADY ------------| |
| | | |
| | | |
| |< - - - - - ACWAKE - - - - - - -| |
| R|<----------- ACDATA -------------|T |
| X|<----------- ACFLAG -------------|X |
| |------------ CAREADY ----------->| |
| | | |
| | | |
+------------+ +---------------+
2. HSI Subsystem in Linux
~~~~~~~~~~~~~~~~~~~~~~~~~
::
+------------+ +---------------+
| Cellular | | Application |
| Die | | Die |
| | - - - - - - CAWAKE - - - - - - >| |
| T|------------ CADATA ------------>|R |
| X|------------ CAFLAG ------------>|X |
| |<----------- ACREADY ------------| |
| | | |
| | | |
| |< - - - - - ACWAKE - - - - - - -| |
| R|<----------- ACDATA -------------|T |
| X|<----------- ACFLAG -------------|X |
| |------------ CAREADY ----------->| |
| | | |
| | | |
+------------+ +---------------+
HSI Subsystem in Linux
-------------------------
In the Linux kernel the hsi subsystem is supposed to be used for HSI devices.
The hsi subsystem contains drivers for hsi controllers including support for
......@@ -45,31 +48,41 @@ It also contains HSI client drivers, which make use of the generic API to
implement a protocol used on the HSI interface. These client drivers can
use an arbitrary number of channels.
3. hsi-char Device
~~~~~~~~~~~~~~~~~~
hsi-char Device
------------------
Each port automatically registers a generic client driver called hsi_char,
which provides a charecter device for userspace representing the HSI port.
It can be used to communicate via HSI from userspace. Userspace may
configure the hsi_char device using the following ioctl commands:
* HSC_RESET:
- flush the HSI port
HSC_RESET
flush the HSI port
* HSC_SET_PM
- enable or disable the client.
HSC_SET_PM
enable or disable the client.
* HSC_SEND_BREAK
- send break
HSC_SEND_BREAK
send break
* HSC_SET_RX
- set RX configuration
HSC_SET_RX
set RX configuration
* HSC_GET_RX
- get RX configuration
HSC_GET_RX
get RX configuration
* HSC_SET_TX
- set TX configuration
HSC_SET_TX
set TX configuration
HSC_GET_TX
get TX configuration
The kernel HSI API
------------------
.. kernel-doc:: include/linux/hsi/hsi.h
:internal:
.. kernel-doc:: drivers/hsi/hsi_core.c
:export:
* HSC_GET_TX
- get TX configuration
I\ :sup:`2`\ C and SMBus Subsystem
==================================
I\ :sup:`2`\ C (or without fancy typography, "I2C") is an acronym for
the "Inter-IC" bus, a simple bus protocol which is widely used where low
data rate communications suffice. Since it's also a licensed trademark,
some vendors use another name (such as "Two-Wire Interface", TWI) for
the same bus. I2C only needs two signals (SCL for clock, SDA for data),
conserving board real estate and minimizing signal quality issues. Most
I2C devices use seven bit addresses, and bus speeds of up to 400 kHz;
there's a high speed extension (3.4 MHz) that's not yet found wide use.
I2C is a multi-master bus; open drain signaling is used to arbitrate
between masters, as well as to handshake and to synchronize clocks from
slower clients.
The Linux I2C programming interfaces support only the master side of bus
interactions, not the slave side. The programming interface is
structured around two kinds of driver, and two kinds of device. An I2C
"Adapter Driver" abstracts the controller hardware; it binds to a
physical device (perhaps a PCI device or platform_device) and exposes a
:c:type:`struct i2c_adapter <i2c_adapter>` representing each
I2C bus segment it manages. On each I2C bus segment will be I2C devices
represented by a :c:type:`struct i2c_client <i2c_client>`.
Those devices will be bound to a :c:type:`struct i2c_driver
<i2c_driver>`, which should follow the standard Linux driver
model. (At this writing, a legacy model is more widely used.) There are
functions to perform various I2C protocol operations; at this writing
all such functions are usable only from task context.
The System Management Bus (SMBus) is a sibling protocol. Most SMBus
systems are also I2C conformant. The electrical constraints are tighter
for SMBus, and it standardizes particular protocol messages and idioms.
Controllers that support I2C can also support most SMBus operations, but
SMBus controllers don't support all the protocol options that an I2C
controller will. There are functions to perform various SMBus protocol
operations, either using I2C primitives or by issuing SMBus commands to
i2c_adapter devices which don't support those I2C operations.
.. kernel-doc:: include/linux/i2c.h
:internal:
.. kernel-doc:: drivers/i2c/i2c-boardinfo.c
:functions: i2c_register_board_info
.. kernel-doc:: drivers/i2c/i2c-core.c
:export:
========================================
The Linux driver implementer's API guide
========================================
The kernel offers a wide variety of interfaces to support the development
of device drivers. This document is an only somewhat organized collection
of some of those interfaces — it will hopefully get better over time! The
available subsections can be seen below.
.. class:: toc-title
Table of contents
.. toctree::
:maxdepth: 2
basics
infrastructure
message-based
sound
frame-buffer
input
spi
i2c
hsi
miscellaneous
Device drivers infrastructure
=============================
The Basic Device Driver-Model Structures
----------------------------------------
.. kernel-doc:: include/linux/device.h
:internal:
Device Drivers Base
-------------------
.. kernel-doc:: drivers/base/init.c
:internal:
.. kernel-doc:: drivers/base/driver.c
:export:
.. kernel-doc:: drivers/base/core.c
:export:
.. kernel-doc:: drivers/base/syscore.c
:export:
.. kernel-doc:: drivers/base/class.c
:export:
.. kernel-doc:: drivers/base/node.c
:internal:
.. kernel-doc:: drivers/base/firmware_class.c
:export:
.. kernel-doc:: drivers/base/transport_class.c
:export:
.. kernel-doc:: drivers/base/dd.c
:export:
.. kernel-doc:: include/linux/platform_device.h
:internal:
.. kernel-doc:: drivers/base/platform.c
:export:
.. kernel-doc:: drivers/base/bus.c
:export:
Buffer Sharing and Synchronization
----------------------------------
The dma-buf subsystem provides the framework for sharing buffers for
hardware (DMA) access across multiple device drivers and subsystems, and
for synchronizing asynchronous hardware access.
This is used, for example, by drm "prime" multi-GPU support, but is of
course not limited to GPU use cases.
The three main components of this are: (1) dma-buf, representing a
sg_table and exposed to userspace as a file descriptor to allow passing
between devices, (2) fence, which provides a mechanism to signal when
one device as finished access, and (3) reservation, which manages the
shared or exclusive fence(s) associated with the buffer.
dma-buf
~~~~~~~
.. kernel-doc:: drivers/dma-buf/dma-buf.c
:export:
.. kernel-doc:: include/linux/dma-buf.h
:internal:
reservation
~~~~~~~~~~~
.. kernel-doc:: drivers/dma-buf/reservation.c
:doc: Reservation Object Overview
.. kernel-doc:: drivers/dma-buf/reservation.c
:export:
.. kernel-doc:: include/linux/reservation.h
:internal:
fence
~~~~~
.. kernel-doc:: drivers/dma-buf/fence.c
:export:
.. kernel-doc:: include/linux/fence.h
:internal:
.. kernel-doc:: drivers/dma-buf/seqno-fence.c
:export:
.. kernel-doc:: include/linux/seqno-fence.h
:internal:
.. kernel-doc:: drivers/dma-buf/fence-array.c
:export:
.. kernel-doc:: include/linux/fence-array.h
:internal:
.. kernel-doc:: drivers/dma-buf/reservation.c
:export:
.. kernel-doc:: include/linux/reservation.h
:internal:
.. kernel-doc:: drivers/dma-buf/sync_file.c
:export:
.. kernel-doc:: include/linux/sync_file.h
:internal:
Device Drivers DMA Management
-----------------------------
.. kernel-doc:: drivers/base/dma-coherent.c
:export:
.. kernel-doc:: drivers/base/dma-mapping.c
:export:
Device Drivers Power Management
-------------------------------
.. kernel-doc:: drivers/base/power/main.c
:export:
Device Drivers ACPI Support
---------------------------
.. kernel-doc:: drivers/acpi/scan.c
:export:
.. kernel-doc:: drivers/acpi/scan.c
:internal:
Device drivers PnP support
--------------------------
.. kernel-doc:: drivers/pnp/core.c
:internal:
.. kernel-doc:: drivers/pnp/card.c
:export:
.. kernel-doc:: drivers/pnp/driver.c
:internal:
.. kernel-doc:: drivers/pnp/manager.c
:export:
.. kernel-doc:: drivers/pnp/support.c
:export:
Userspace IO devices
--------------------
.. kernel-doc:: drivers/uio/uio.c
:export:
.. kernel-doc:: include/linux/uio_driver.h
:internal:
Input Subsystem
===============
Input core
----------
.. kernel-doc:: include/linux/input.h
:internal:
.. kernel-doc:: drivers/input/input.c
:export:
.. kernel-doc:: drivers/input/ff-core.c
:export:
.. kernel-doc:: drivers/input/ff-memless.c
:export:
Multitouch Library
------------------
.. kernel-doc:: include/linux/input/mt.h
:internal:
.. kernel-doc:: drivers/input/input-mt.c
:export:
Polled input devices
--------------------
.. kernel-doc:: include/linux/input-polldev.h
:internal:
.. kernel-doc:: drivers/input/input-polldev.c
:export:
Matrix keyboards/keypads
------------------------
.. kernel-doc:: include/linux/input/matrix_keypad.h
:internal:
Sparse keymap support
---------------------
.. kernel-doc:: include/linux/input/sparse-keymap.h
:internal:
.. kernel-doc:: drivers/input/sparse-keymap.c
:export:
Message-based devices
=====================
Fusion message devices
----------------------
.. kernel-doc:: drivers/message/fusion/mptbase.c
:export:
.. kernel-doc:: drivers/message/fusion/mptscsih.c
:export:
Parallel Port Devices
=====================
.. kernel-doc:: include/linux/parport.h
:internal:
.. kernel-doc:: drivers/parport/ieee1284.c
:export:
.. kernel-doc:: drivers/parport/share.c
:export:
.. kernel-doc:: drivers/parport/daisy.c
:internal:
16x50 UART Driver
=================
.. kernel-doc:: drivers/tty/serial/serial_core.c
:export:
.. kernel-doc:: drivers/tty/serial/8250/8250_core.c
:export:
Pulse-Width Modulation (PWM)
============================
Pulse-width modulation is a modulation technique primarily used to
control power supplied to electrical devices.
The PWM framework provides an abstraction for providers and consumers of
PWM signals. A controller that provides one or more PWM signals is
registered as :c:type:`struct pwm_chip <pwm_chip>`. Providers
are expected to embed this structure in a driver-specific structure.
This structure contains fields that describe a particular chip.
A chip exposes one or more PWM signal sources, each of which exposed as
a :c:type:`struct pwm_device <pwm_device>`. Operations can be
performed on PWM devices to control the period, duty cycle, polarity and
active state of the signal.
Note that PWM devices are exclusive resources: they can always only be
used by one consumer at a time.
.. kernel-doc:: include/linux/pwm.h
:internal:
.. kernel-doc:: drivers/pwm/core.c
:export:
Sound Devices
=============
.. kernel-doc:: include/sound/core.h
:internal:
.. kernel-doc:: sound/sound_core.c
:export:
.. kernel-doc:: include/sound/pcm.h
:internal:
.. kernel-doc:: sound/core/pcm.c
:export:
.. kernel-doc:: sound/core/device.c
:export:
.. kernel-doc:: sound/core/info.c
:export:
.. kernel-doc:: sound/core/rawmidi.c
:export:
.. kernel-doc:: sound/core/sound.c
:export:
.. kernel-doc:: sound/core/memory.c
:export:
.. kernel-doc:: sound/core/pcm_memory.c
:export:
.. kernel-doc:: sound/core/init.c
:export:
.. kernel-doc:: sound/core/isadma.c
:export:
.. kernel-doc:: sound/core/control.c
:export:
.. kernel-doc:: sound/core/pcm_lib.c
:export:
.. kernel-doc:: sound/core/hwdep.c
:export:
.. kernel-doc:: sound/core/pcm_native.c
:export:
.. kernel-doc:: sound/core/memalloc.c
:export:
Serial Peripheral Interface (SPI)
=================================
SPI is the "Serial Peripheral Interface", widely used with embedded
systems because it is a simple and efficient interface: basically a
multiplexed shift register. Its three signal wires hold a clock (SCK,
often in the range of 1-20 MHz), a "Master Out, Slave In" (MOSI) data
line, and a "Master In, Slave Out" (MISO) data line. SPI is a full
duplex protocol; for each bit shifted out the MOSI line (one per clock)
another is shifted in on the MISO line. Those bits are assembled into
words of various sizes on the way to and from system memory. An
additional chipselect line is usually active-low (nCS); four signals are
normally used for each peripheral, plus sometimes an interrupt.
The SPI bus facilities listed here provide a generalized interface to
declare SPI busses and devices, manage them according to the standard
Linux driver model, and perform input/output operations. At this time,
only "master" side interfaces are supported, where Linux talks to SPI
peripherals and does not implement such a peripheral itself. (Interfaces
to support implementing SPI slaves would necessarily look different.)
The programming interface is structured around two kinds of driver, and
two kinds of device. A "Controller Driver" abstracts the controller
hardware, which may be as simple as a set of GPIO pins or as complex as
a pair of FIFOs connected to dual DMA engines on the other side of the
SPI shift register (maximizing throughput). Such drivers bridge between
whatever bus they sit on (often the platform bus) and SPI, and expose
the SPI side of their device as a :c:type:`struct spi_master
<spi_master>`. SPI devices are children of that master,
represented as a :c:type:`struct spi_device <spi_device>` and
manufactured from :c:type:`struct spi_board_info
<spi_board_info>` descriptors which are usually provided by
board-specific initialization code. A :c:type:`struct spi_driver
<spi_driver>` is called a "Protocol Driver", and is bound to a
spi_device using normal driver model calls.
The I/O model is a set of queued messages. Protocol drivers submit one
or more :c:type:`struct spi_message <spi_message>` objects,
which are processed and completed asynchronously. (There are synchronous
wrappers, however.) Messages are built from one or more
:c:type:`struct spi_transfer <spi_transfer>` objects, each of
which wraps a full duplex SPI transfer. A variety of protocol tweaking
options are needed, because different chips adopt very different
policies for how they use the bits transferred with SPI.
.. kernel-doc:: include/linux/spi/spi.h
:internal:
.. kernel-doc:: drivers/spi/spi.c
:functions: spi_register_board_info
.. kernel-doc:: drivers/spi/spi.c
:export:
......@@ -50,7 +50,7 @@ Attributes of devices can be exported by a device driver through sysfs.
Please see Documentation/filesystems/sysfs.txt for more information
on how sysfs works.
As explained in Documentation/kobject.txt, device attributes must be be
As explained in Documentation/kobject.txt, device attributes must be
created before the KOBJ_ADD uevent is generated. The only way to realize
that is by defining an attribute group.
......
......@@ -145,7 +145,7 @@ Table 1-1: Process specific entries in /proc
symbol the task is blocked in - or "0" if not blocked.
pagemap Page table
stack Report full stack trace, enable via CONFIG_STACKTRACE
smaps a extension based on maps, showing the memory consumption of
smaps an extension based on maps, showing the memory consumption of
each mapping and flags associated with it
numa_maps an extension based on maps, showing the memory locality and
binding policy as well as mem usage (in pages) of each mapping.
......
......@@ -13,6 +13,7 @@ Contents:
kernel-documentation
dev-tools/tools
driver-api/index
media/index
gpu/index
......
# -*- coding: utf-8; mode: python -*-
# pylint: disable=W0141,C0113,C0103,C0325
u"""
cdomain
~~~~~~~
......@@ -25,15 +26,26 @@ u"""
* :c:func:`VIDIOC_LOG_STATUS` or
* :any:`VIDIOC_LOG_STATUS` (``:any:`` needs sphinx 1.3)
* Handle signatures of function-like macros well. Don't try to deduce
arguments types of function-like macros.
"""
from docutils import nodes
from docutils.parsers.rst import directives
import sphinx
from sphinx import addnodes
from sphinx.domains.c import c_funcptr_sig_re, c_sig_re
from sphinx.domains.c import CObject as Base_CObject
from sphinx.domains.c import CDomain as Base_CDomain
__version__ = '1.0'
# Get Sphinx version
major, minor, patch = map(int, sphinx.__version__.split("."))
def setup(app):
app.override_domain(CDomain)
......@@ -53,9 +65,54 @@ class CObject(Base_CObject):
"name" : directives.unchanged
}
def handle_func_like_macro(self, sig, signode):
u"""Handles signatures of function-like macros.
If the objtype is 'function' and the the signature ``sig`` is a
function-like macro, the name of the macro is returned. Otherwise
``False`` is returned. """
if not self.objtype == 'function':
return False
m = c_funcptr_sig_re.match(sig)
if m is None:
m = c_sig_re.match(sig)
if m is None:
raise ValueError('no match')
rettype, fullname, arglist, _const = m.groups()
arglist = arglist.strip()
if rettype or not arglist:
return False
arglist = arglist.replace('`', '').replace('\\ ', '') # remove markup
arglist = [a.strip() for a in arglist.split(",")]
# has the first argument a type?
if len(arglist[0].split(" ")) > 1:
return False
# This is a function-like macro, it's arguments are typeless!
signode += addnodes.desc_name(fullname, fullname)
paramlist = addnodes.desc_parameterlist()
signode += paramlist
for argname in arglist:
param = addnodes.desc_parameter('', '', noemph=True)
# separate by non-breaking space in the output
param += nodes.emphasis(argname, argname)
paramlist += param
return fullname
def handle_signature(self, sig, signode):
"""Transform a C signature into RST nodes."""
fullname = super(CObject, self).handle_signature(sig, signode)
fullname = self.handle_func_like_macro(sig, signode)
if not fullname:
fullname = super(CObject, self).handle_signature(sig, signode)
if "name" in self.options:
if self.objtype == 'function':
fullname = self.options["name"]
......@@ -85,8 +142,14 @@ class CObject(Base_CObject):
indextext = self.get_index_text(name)
if indextext:
self.indexnode['entries'].append(('single', indextext,
targetname, '', None))
if major == 1 and minor < 4:
# indexnode's tuple changed in 1.4
# https://github.com/sphinx-doc/sphinx/commit/e6a5a3a92e938fcd75866b4227db9e0524d58f7c
self.indexnode['entries'].append(
('single', indextext, targetname, ''))
else:
self.indexnode['entries'].append(
('single', indextext, targetname, '', None))
class CDomain(Base_CDomain):
......
......@@ -5606,7 +5606,7 @@ M: Sebastian Reichel <sre@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi.git
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-hsi
F: Documentation/hsi.txt
F: Documentation/device-drivers/serial-interfaces.rst
F: drivers/hsi/
F: include/linux/hsi/
F: include/uapi/linux/hsi/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment