Skip to content

L
linux
Commit 2d10e2e2 authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson
Browse files
Options

arm64: dts: qcom: sm8250-*: Remove thermal zone polling delays 

All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-27-436ca4218da2@linaro.orgSigned-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent fc2f92b5
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 49 deletions
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
View file @ 2d10e2e2
......@@ -110,8 +110,6 @@ lt9611_3v3: lt9611-3v3 {
thermal-zones {
conn-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150b_adc_tm 0>;
trips {
......@@ -124,8 +122,6 @@ active-config0 {
};
pm8150l-pcb-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150l_adc_tm 1>;
trips {
......@@ -138,8 +134,6 @@ active-config0 {
};
skin-msm-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150l_adc_tm 0>;
trips {
......@@ -152,8 +146,6 @@ active-config0 {
};
wifi-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150_adc_tm 1>;
trips {
......@@ -166,8 +158,6 @@ active-config0 {
};
xo-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150_adc_tm 0>;
trips {
......
arch/arm64/boot/dts/qcom/sm8250-mtp.dts
View file @ 2d10e2e2
......@@ -53,8 +53,6 @@ chosen {
thermal-zones {
camera-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150l_adc_tm 0>;
trips {
......@@ -67,8 +65,6 @@ active-config0 {
};
conn-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150b_adc_tm 0>;
trips {
......@@ -81,8 +77,6 @@ active-config0 {
};
mmw-pa1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150_adc_tm 2>;
trips {
......@@ -95,8 +89,6 @@ active-config0 {
};
mmw-pa2-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150l_adc_tm 2>;
trips {
......@@ -109,8 +101,6 @@ active-config0 {
};
skin-msm-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150l_adc_tm 1>;
trips {
......@@ -123,8 +113,6 @@ active-config0 {
};
skin-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150_adc_tm 1>;
trips {
......@@ -137,8 +125,6 @@ active-config0 {
};
xo-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8150_adc_tm 0>;
trips {
......
arch/arm64/boot/dts/qcom/sm8250.dtsi
View file @ 2d10e2e2
......@@ -6299,7 +6299,6 @@ timer {
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 1>;
......@@ -6343,7 +6342,6 @@ map1 {
cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 2>;
......@@ -6387,7 +6385,6 @@ map1 {
cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 3>;
......@@ -6431,7 +6428,6 @@ map1 {
cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 4>;
......@@ -6475,7 +6471,6 @@ map1 {
cpu4-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 7>;
......@@ -6519,7 +6514,6 @@ map1 {
cpu5-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 8>;
......@@ -6563,7 +6557,6 @@ map1 {
cpu6-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 9>;
......@@ -6607,7 +6600,6 @@ map1 {
cpu7-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
......@@ -6651,7 +6643,6 @@ map1 {
cpu4-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 11>;
......@@ -6695,7 +6686,6 @@ map1 {
cpu5-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 12>;
......@@ -6739,7 +6729,6 @@ map1 {
cpu6-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 13>;
......@@ -6783,7 +6772,6 @@ map1 {
cpu7-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 14>;
......@@ -6827,7 +6815,6 @@ map1 {
aoss0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 0>;
......@@ -6842,7 +6829,6 @@ aoss0_alert0: trip-point0 {
cluster0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
......@@ -6862,7 +6848,6 @@ cluster0_crit: cluster0-crit {
cluster1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 6>;
......@@ -6882,7 +6867,6 @@ cluster1_crit: cluster1-crit {
gpu-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 15>;
......@@ -6904,7 +6888,6 @@ gpu_top_alert0: trip-point0 {
aoss1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 0>;
......@@ -6919,7 +6902,6 @@ aoss1_alert0: trip-point0 {
wlan-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 1>;
......@@ -6934,7 +6916,6 @@ wlan_alert0: trip-point0 {
video-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 2>;
......@@ -6949,7 +6930,6 @@ video_alert0: trip-point0 {
mem-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 3>;
......@@ -6964,7 +6944,6 @@ mem_alert0: trip-point0 {
q6-hvx-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 4>;
......@@ -6979,7 +6958,6 @@ q6_hvx_alert0: trip-point0 {
camera-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 5>;
......@@ -6994,7 +6972,6 @@ camera_alert0: trip-point0 {
compute-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 6>;
......@@ -7009,7 +6986,6 @@ compute_alert0: trip-point0 {
npu-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 7>;
......@@ -7024,7 +7000,6 @@ npu_alert0: trip-point0 {
gpu-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 8>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7