Commit 2d137c7e authored by Thierry Reding's avatar Thierry Reding Committed by Dmitry Torokhov

Input: tsc2007 - add poll_delay parameter to platform data

Depending on the quality of the touch panel, the time for the X-, X+, Y-
and Y+ inputs to settle may vary. The poll_delay parameter can be used
to override the default of 1 millisecond.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Signed-off-by: default avatarThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent 84005eb5
......@@ -27,7 +27,6 @@
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#define TS_POLL_DELAY 1 /* ms delay between samples */
#define TS_POLL_PERIOD 1 /* ms delay between samples */
#define TSC2007_MEASURE_TEMP0 (0x0 << 4)
......@@ -76,6 +75,7 @@ struct tsc2007 {
u16 model;
u16 x_plate_ohms;
u16 max_rt;
unsigned long poll_delay;
bool pendown;
int irq;
......@@ -242,7 +242,7 @@ static irqreturn_t tsc2007_irq(int irq, void *handle)
if (!ts->get_pendown_state || likely(ts->get_pendown_state())) {
disable_irq_nosync(ts->irq);
schedule_delayed_work(&ts->work,
msecs_to_jiffies(TS_POLL_DELAY));
msecs_to_jiffies(ts->poll_delay));
}
if (ts->clear_penirq)
......@@ -296,6 +296,7 @@ static int __devinit tsc2007_probe(struct i2c_client *client,
ts->model = pdata->model;
ts->x_plate_ohms = pdata->x_plate_ohms;
ts->max_rt = pdata->max_rt ? : MAX_12BIT;
ts->poll_delay = pdata->poll_delay ? : 1;
ts->get_pendown_state = pdata->get_pendown_state;
ts->clear_penirq = pdata->clear_penirq;
......
......@@ -7,6 +7,8 @@ struct tsc2007_platform_data {
u16 model; /* 2007. */
u16 x_plate_ohms;
u16 max_rt; /* max. resistance above which samples are ignored */
unsigned long poll_delay; /* delay (in ms) after pen-down event
before polling starts */
int (*get_pendown_state)(void);
void (*clear_penirq)(void); /* If needed, clear 2nd level
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment