Commit 2d24b532 authored by Steven King's avatar Steven King Committed by Greg Ungerer

m68knommu: platform support for i2c devices on ColdFire SoC

These changes based on work by Steven King <sfking@fdwdc.com> to support
the i2c hardware modules on ColdFire SoC family devices.

This is the per SoC hardware support. Contains a common platform device
setup. Each of the SoC family members tends to have some minor local
setup required to initialize the module. But all ColdFire family members
use the same i2c hardware module.

This i2c hardware module is the same as used in the Freescale iMX ARM
based family of SoC devices. Steven's original patches were based on using
a new and different i2c-coldfire.c driver. But this is not neccessary as
we can use the existing Linux i2c-imx.c driver with no change required to
it. And this patch is now based on using the existing i2c-imx driver.

This patch only contains the ColdFire platform changes.
Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
Tested-by: default avatarAngelo Dureghello <angelo@sysam.it>
parent 3e5de27e
......@@ -327,6 +327,147 @@ static struct platform_device mcf_qspi = {
};
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
#if IS_ENABLED(CONFIG_I2C_IMX)
static struct resource mcf_i2c0_resources[] = {
{
.start = MCFI2C_BASE0,
.end = MCFI2C_BASE0 + MCFI2C_SIZE0 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_I2C0,
.end = MCF_IRQ_I2C0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mcf_i2c0 = {
.name = "imx1-i2c",
.id = 0,
.num_resources = ARRAY_SIZE(mcf_i2c0_resources),
.resource = mcf_i2c0_resources,
};
#ifdef MCFI2C_BASE1
static struct resource mcf_i2c1_resources[] = {
{
.start = MCFI2C_BASE1,
.end = MCFI2C_BASE1 + MCFI2C_SIZE1 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_I2C1,
.end = MCF_IRQ_I2C1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mcf_i2c1 = {
.name = "imx1-i2c",
.id = 1,
.num_resources = ARRAY_SIZE(mcf_i2c1_resources),
.resource = mcf_i2c1_resources,
};
#endif /* MCFI2C_BASE1 */
#ifdef MCFI2C_BASE2
static struct resource mcf_i2c2_resources[] = {
{
.start = MCFI2C_BASE2,
.end = MCFI2C_BASE2 + MCFI2C_SIZE2 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_I2C2,
.end = MCF_IRQ_I2C2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mcf_i2c2 = {
.name = "imx1-i2c",
.id = 2,
.num_resources = ARRAY_SIZE(mcf_i2c2_resources),
.resource = mcf_i2c2_resources,
};
#endif /* MCFI2C_BASE2 */
#ifdef MCFI2C_BASE3
static struct resource mcf_i2c3_resources[] = {
{
.start = MCFI2C_BASE3,
.end = MCFI2C_BASE3 + MCFI2C_SIZE3 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_I2C3,
.end = MCF_IRQ_I2C3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mcf_i2c3 = {
.name = "imx1-i2c",
.id = 3,
.num_resources = ARRAY_SIZE(mcf_i2c3_resources),
.resource = mcf_i2c3_resources,
};
#endif /* MCFI2C_BASE3 */
#ifdef MCFI2C_BASE4
static struct resource mcf_i2c4_resources[] = {
{
.start = MCFI2C_BASE4,
.end = MCFI2C_BASE4 + MCFI2C_SIZE4 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_I2C4,
.end = MCF_IRQ_I2C4,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mcf_i2c4 = {
.name = "imx1-i2c",
.id = 4,
.num_resources = ARRAY_SIZE(mcf_i2c4_resources),
.resource = mcf_i2c4_resources,
};
#endif /* MCFI2C_BASE4 */
#ifdef MCFI2C_BASE5
static struct resource mcf_i2c5_resources[] = {
{
.start = MCFI2C_BASE5,
.end = MCFI2C_BASE5 + MCFI2C_SIZE5 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_I2C5,
.end = MCF_IRQ_I2C5,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mcf_i2c5 = {
.name = "imx1-i2c",
.id = 5,
.num_resources = ARRAY_SIZE(mcf_i2c5_resources),
.resource = mcf_i2c5_resources,
};
#endif /* MCFI2C_BASE5 */
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
static struct platform_device *mcf_devices[] __initdata = {
&mcf_uart,
#if IS_ENABLED(CONFIG_FEC)
......@@ -338,6 +479,24 @@ static struct platform_device *mcf_devices[] __initdata = {
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
&mcf_qspi,
#endif
#if IS_ENABLED(CONFIG_I2C_IMX)
&mcf_i2c0,
#ifdef MCFI2C_BASE1
&mcf_i2c1,
#endif
#ifdef MCFI2C_BASE2
&mcf_i2c2,
#endif
#ifdef MCFI2C_BASE3
&mcf_i2c3,
#endif
#ifdef MCFI2C_BASE4
&mcf_i2c4,
#endif
#ifdef MCFI2C_BASE5
&mcf_i2c5,
#endif
#endif
};
/*
......
......@@ -26,6 +26,7 @@ DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
struct clk *mcf_clks[] = {
&clk_pll,
......@@ -34,11 +35,21 @@ struct clk *mcf_clks[] = {
&clk_mcftmr1,
&clk_mcfuart0,
&clk_mcfuart1,
&clk_mcfi2c0,
NULL
};
/***************************************************************************/
static void __init m5206_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
MCFSIM_I2CICR);
mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
void __init config_BSP(char *commandp, int size)
{
#if defined(CONFIG_NETtel)
......@@ -53,6 +64,7 @@ void __init config_BSP(char *commandp, int size)
mcf_mapirq2imr(25, MCFINTC_EINT1);
mcf_mapirq2imr(28, MCFINTC_EINT4);
mcf_mapirq2imr(31, MCFINTC_EINT7);
m5206_i2c_init();
}
/***************************************************************************/
......@@ -28,7 +28,7 @@ DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
DEFINE_CLK(0, "edma", 17, MCF_CLK);
DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
......@@ -53,7 +53,7 @@ struct clk *mcf_clks[] = {
&__clk_0_17, /* edma */
&__clk_0_18, /* intc.0 */
&__clk_0_21, /* iack.0 */
&__clk_0_22, /* mcfi2c.0 */
&__clk_0_22, /* imx1-i2c.0 */
&__clk_0_23, /* mcfqspi.0 */
&__clk_0_24, /* mcfuart.0 */
&__clk_0_25, /* mcfuart.1 */
......@@ -71,7 +71,7 @@ struct clk *mcf_clks[] = {
&__clk_0_40, /* sys.0 */
&__clk_0_41, /* gpio.0 */
&__clk_0_42, /* sdram.0 */
NULL,
NULL,
};
static struct clk * const enable_clks[] __initconst = {
......@@ -94,7 +94,7 @@ static struct clk * const enable_clks[] __initconst = {
static struct clk * const disable_clks[] __initconst = {
&__clk_0_12, /* fec.0 */
&__clk_0_17, /* edma */
&__clk_0_22, /* mcfi2c.0 */
&__clk_0_22, /* imx1-i2c.0 */
&__clk_0_23, /* mcfqspi.0 */
&__clk_0_28, /* mcftmr.0 */
&__clk_0_29, /* mcftmr.1 */
......@@ -133,6 +133,21 @@ static void __init m520x_qspi_init(void)
/***************************************************************************/
static void __init m520x_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
u8 par;
/* setup Port FECI2C Pin Assignment Register for I2C */
/* set PAR_SCL to SCL and PAR_SDA to SDA */
par = readb(MCF_GPIO_PAR_FECI2C);
par |= 0x0f;
writeb(par, MCF_GPIO_PAR_FECI2C);
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
static void __init m520x_uarts_init(void)
{
u16 par;
......@@ -175,6 +190,7 @@ void __init config_BSP(char *commandp, int size)
m520x_uarts_init();
m520x_fec_init();
m520x_qspi_init();
m520x_i2c_init();
}
/***************************************************************************/
......@@ -34,6 +34,7 @@ DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
struct clk *mcf_clks[] = {
&clk_pll,
......@@ -47,6 +48,7 @@ struct clk *mcf_clks[] = {
&clk_mcfuart2,
&clk_mcfqspi0,
&clk_fec0,
&clk_mcfi2c0,
NULL
};
......@@ -68,6 +70,21 @@ static void __init m523x_qspi_init(void)
/***************************************************************************/
static void __init m523x_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
u8 par;
/* setup Port AS Pin Assignment Register for I2C */
/* set PASPA0 to SCL and PASPA1 to SDA */
par = readb(MCFGPIO_PAR_FECI2C);
par |= 0x0f;
writeb(par, MCFGPIO_PAR_FECI2C);
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
static void __init m523x_fec_init(void)
{
/* Set multi-function pins to ethernet use */
......@@ -81,6 +98,7 @@ void __init config_BSP(char *commandp, int size)
mach_sched_init = hw_timer_init;
m523x_fec_init();
m523x_qspi_init();
m523x_i2c_init();
}
/***************************************************************************/
......@@ -27,6 +27,8 @@ DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
DEFINE_CLK(mcfi2c1, "imx1-i2c.1", MCF_BUSCLK);
struct clk *mcf_clks[] = {
&clk_pll,
......@@ -36,6 +38,8 @@ struct clk *mcf_clks[] = {
&clk_mcfuart0,
&clk_mcfuart1,
&clk_mcfqspi0,
&clk_mcfi2c0,
&clk_mcfi2c1,
NULL
};
......@@ -85,6 +89,26 @@ static void __init m5249_qspi_init(void)
/***************************************************************************/
static void __init m5249_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
u32 r;
/* first I2C controller uses regular irq setup */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
MCFSIM_I2CICR);
mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
/* second I2C controller is completely different */
r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
#endif /* CONFIG_I2C_IMX */
}
/***************************************************************************/
#ifdef CONFIG_M5249C3
static void __init m5249_smc91x_init(void)
......@@ -111,6 +135,7 @@ void __init config_BSP(char *commandp, int size)
m5249_smc91x_init();
#endif
m5249_qspi_init();
m5249_i2c_init();
}
/***************************************************************************/
......
......@@ -27,6 +27,8 @@ DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
DEFINE_CLK(mcfi2c1, "imx1-i2c.1", MCF_BUSCLK);
struct clk *mcf_clks[] = {
&clk_pll,
......@@ -36,6 +38,8 @@ struct clk *mcf_clks[] = {
&clk_mcfuart0,
&clk_mcfuart1,
&clk_mcfqspi0,
&clk_mcfi2c0,
&clk_mcfi2c1,
NULL
};
......@@ -59,12 +63,12 @@ static void __init m525x_qspi_init(void)
static void __init m525x_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_COLDFIRE)
#if IS_ENABLED(CONFIG_I2C_IMX)
u32 r;
/* first I2C controller uses regular irq setup */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
MCFSIM_I2CICR);
MCFSIM_I2CICR);
mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
/* second I2C controller is completely different */
......@@ -72,7 +76,7 @@ static void __init m525x_i2c_init(void)
r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
#endif /* IS_ENABLED(CONFIG_I2C_COLDFIRE) */
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
......
......@@ -36,6 +36,7 @@ DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
DEFINE_CLK(fec1, "fec.1", MCF_BUSCLK);
DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
struct clk *mcf_clks[] = {
&clk_pll,
......@@ -50,6 +51,7 @@ struct clk *mcf_clks[] = {
&clk_mcfqspi0,
&clk_fec0,
&clk_fec1,
&clk_mcfi2c0,
NULL
};
......@@ -76,6 +78,31 @@ static void __init m527x_qspi_init(void)
/***************************************************************************/
static void __init m527x_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
#if defined(CONFIG_M5271)
u8 par;
/* setup Port FECI2C Pin Assignment Register for I2C */
/* set PAR_SCL to SCL and PAR_SDA to SDA */
par = readb(MCFGPIO_PAR_FECI2C);
par |= 0x0f;
writeb(par, MCFGPIO_PAR_FECI2C);
#elif defined(CONFIG_M5275)
u16 par;
/* setup Port FECI2C Pin Assignment Register for I2C */
/* set PAR_SCL to SCL and PAR_SDA to SDA */
par = readw(MCFGPIO_PAR_FECI2C);
par |= 0x0f;
writew(par, MCFGPIO_PAR_FECI2C);
#endif
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
static void __init m527x_uarts_init(void)
{
u16 sepmask;
......@@ -122,6 +149,7 @@ void __init config_BSP(char *commandp, int size)
m527x_uarts_init();
m527x_fec_init();
m527x_qspi_init();
m527x_i2c_init();
}
/***************************************************************************/
......@@ -36,6 +36,7 @@ DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
struct clk *mcf_clks[] = {
&clk_pll,
......@@ -49,6 +50,7 @@ struct clk *mcf_clks[] = {
&clk_mcfuart2,
&clk_mcfqspi0,
&clk_fec0,
&clk_mcfi2c0,
NULL
};
......@@ -64,6 +66,21 @@ static void __init m528x_qspi_init(void)
/***************************************************************************/
static void __init m528x_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
u16 paspar;
/* setup Port AS Pin Assignment Register for I2C */
/* set PASPA0 to SCL and PASPA1 to SDA */
paspar = readw(MCFGPIO_PASPAR);
paspar |= 0xF;
writew(paspar, MCFGPIO_PASPAR);
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
static void __init m528x_uarts_init(void)
{
u8 port;
......@@ -127,6 +144,7 @@ void __init config_BSP(char *commandp, int size)
m528x_uarts_init();
m528x_fec_init();
m528x_qspi_init();
m528x_i2c_init();
}
/***************************************************************************/
......@@ -35,6 +35,7 @@ DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
struct clk *mcf_clks[] = {
&clk_pll,
......@@ -43,11 +44,23 @@ struct clk *mcf_clks[] = {
&clk_mcftmr1,
&clk_mcfuart0,
&clk_mcfuart1,
&clk_mcfi2c0,
NULL
};
/***************************************************************************/
static void __init m5307_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
MCFSIM_I2CICR);
mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
#if defined(CONFIG_NETtel) || \
......@@ -73,6 +86,7 @@ void __init config_BSP(char *commandp, int size)
*/
wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
#endif
m5307_i2c_init();
}
/***************************************************************************/
......@@ -38,7 +38,7 @@ DEFINE_CLK(0, "edma", 17, MCF_CLK);
DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
......@@ -77,7 +77,7 @@ struct clk *mcf_clks[] = {
&__clk_0_18, /* intc.0 */
&__clk_0_19, /* intc.1 */
&__clk_0_21, /* iack.0 */
&__clk_0_22, /* mcfi2c.0 */
&__clk_0_22, /* imx1-i2c.0 */
&__clk_0_23, /* mcfqspi.0 */
&__clk_0_24, /* mcfuart.0 */
&__clk_0_25, /* mcfuart.1 */
......@@ -133,7 +133,7 @@ static struct clk * const disable_clks[] __initconst = {
&__clk_0_8, /* mcfcan.0 */
&__clk_0_12, /* fec.0 */
&__clk_0_17, /* edma */
&__clk_0_22, /* mcfi2c.0 */
&__clk_0_22, /* imx1-i2c.0 */
&__clk_0_23, /* mcfqspi.0 */
&__clk_0_30, /* mcftmr.2 */
&__clk_0_31, /* mcftmr.3 */
......@@ -176,6 +176,19 @@ static void __init m53xx_qspi_init(void)
/***************************************************************************/
static void __init m53xx_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
/* setup Port AS Pin Assignment Register for I2C */
/* set PASPA0 to SCL and PASPA1 to SDA */
u8 r = readb(MCFGPIO_PAR_FECI2C);
r |= 0x0f;
writeb(r, MCFGPIO_PAR_FECI2C);
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
static void __init m53xx_uarts_init(void)
{
/* UART GPIO initialization */
......@@ -218,6 +231,7 @@ void __init config_BSP(char *commandp, int size)
m53xx_uarts_init();
m53xx_fec_init();
m53xx_qspi_init();
m53xx_i2c_init();
#ifdef CONFIG_BDM_DISABLE
/*
......
......@@ -26,6 +26,7 @@ DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
struct clk *mcf_clks[] = {
&clk_pll,
......@@ -34,11 +35,23 @@ struct clk *mcf_clks[] = {
&clk_mcftmr1,
&clk_mcfuart0,
&clk_mcfuart1,
&clk_mcfi2c0,
NULL
};
/***************************************************************************/
static void __init m5407_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
MCFSIM_I2CICR);
mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_sched_init = hw_timer_init;
......@@ -48,6 +61,7 @@ void __init config_BSP(char *commandp, int size)
mcf_mapirq2imr(27, MCFINTC_EINT3);
mcf_mapirq2imr(29, MCFINTC_EINT5);
mcf_mapirq2imr(31, MCFINTC_EINT7);
m5407_i2c_init();
}
/***************************************************************************/
......@@ -19,13 +19,13 @@
DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
DEFINE_CLK(0, "mcfcan.1", 9, MCF_CLK);
DEFINE_CLK(0, "mcfi2c.1", 14, MCF_CLK);
DEFINE_CLK(0, "imx1-i2c.1", 14, MCF_CLK);
DEFINE_CLK(0, "mcfdspi.1", 15, MCF_CLK);
DEFINE_CLK(0, "edma", 17, MCF_CLK);
DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
DEFINE_CLK(0, "intc.2", 20, MCF_CLK);
DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
DEFINE_CLK(0, "mcfdspi.0", 23, MCF_CLK);
DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
......@@ -59,10 +59,10 @@ DEFINE_CLK(0, "switch.1", 56, MCF_CLK);
DEFINE_CLK(0, "nand.0", 63, MCF_CLK);
DEFINE_CLK(1, "mcfow.0", 2, MCF_CLK);
DEFINE_CLK(1, "mcfi2c.2", 4, MCF_CLK);
DEFINE_CLK(1, "mcfi2c.3", 5, MCF_CLK);
DEFINE_CLK(1, "mcfi2c.4", 6, MCF_CLK);
DEFINE_CLK(1, "mcfi2c.5", 7, MCF_CLK);
DEFINE_CLK(1, "imx1-i2c.2", 4, MCF_CLK);
DEFINE_CLK(1, "imx1-i2c.3", 5, MCF_CLK);
DEFINE_CLK(1, "imx1-i2c.4", 6, MCF_CLK);
DEFINE_CLK(1, "imx1-i2c.5", 7, MCF_CLK);
DEFINE_CLK(1, "mcfuart.4", 24, MCF_BUSCLK);
DEFINE_CLK(1, "mcfuart.5", 25, MCF_BUSCLK);
DEFINE_CLK(1, "mcfuart.6", 26, MCF_BUSCLK);
......
......@@ -37,6 +37,7 @@ DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
DEFINE_CLK(mcfuart3, "mcfuart.3", MCF_BUSCLK);
DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
struct clk *mcf_clks[] = {
&clk_pll,
......@@ -47,6 +48,7 @@ struct clk *mcf_clks[] = {
&clk_mcfuart1,
&clk_mcfuart2,
&clk_mcfuart3,
&clk_mcfi2c0,
NULL
};
......@@ -65,6 +67,20 @@ static void __init m54xx_uarts_init(void)
/***************************************************************************/
static void __init m54xx_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
u32 r;
/* set the fec/i2c/irq pin assignment register for i2c */
r = readl(MCF_PAR_FECI2CIRQ);
r |= MCF_PAR_FECI2CIRQ_SDA | MCF_PAR_FECI2CIRQ_SCL;
writel(r, MCF_PAR_FECI2CIRQ);
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
static void mcf54xx_reset(void)
{
/* disable interrupts and enable the watchdog */
......@@ -86,6 +102,7 @@ void __init config_BSP(char *commandp, int size)
mach_reset = mcf54xx_reset;
mach_sched_init = hw_timer_init;
m54xx_uarts_init();
m54xx_i2c_init();
}
/***************************************************************************/
......@@ -110,6 +110,7 @@
/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_I2C0 29 /* I2C, Level 5 */
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
......@@ -138,6 +139,7 @@
#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */
#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */
#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */
#define MCFSIM_I2CICR MCFSIM_ICR11 /* I2C ICR */
#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */
#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */
#ifdef CONFIG_M5206e
......@@ -145,5 +147,11 @@
#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */
#endif
/*
* I2C Controller
*/
#define MCFI2C_BASE0 (MCF_MBAR + 0x1e0)
#define MCFI2C_SIZE0 0x40
/****************************************************************************/
#endif /* m5206sim_h */
......@@ -50,6 +50,7 @@
#define MCFINT_UART0 26 /* Interrupt number for UART0 */
#define MCFINT_UART1 27 /* Interrupt number for UART1 */
#define MCFINT_UART2 28 /* Interrupt number for UART2 */
#define MCFINT_I2C0 30 /* Interrupt number for I2C */
#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 36 /* Interrupt number for FEC RX */
#define MCFINT_FECTX0 40 /* Interrupt number for FEC RX */
......@@ -67,6 +68,7 @@
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
#define MCF_IRQ_I2C0 (MCFINT_VECBASE + MCFINT_I2C0)
/*
* SDRAM configuration registers.
*/
......@@ -200,5 +202,11 @@
#define MCFPM_PPMLR0 0xfc040034
#define MCFPM_LPCR 0xfc0a0007
/*
* I2C module.
*/
#define MCFI2C_BASE0 0xFC058000
#define MCFI2C_SIZE0 0x40
/****************************************************************************/
#endif /* m520xsim_h */
......@@ -37,7 +37,8 @@
#define MCFINT_UART0 13 /* Interrupt number for UART0 */
#define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_I2C0 17 /* Interrupt number for I2C */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 23 /* Interrupt number for FEC */
#define MCFINT_FECTX0 27 /* Interrupt number for FEC */
#define MCFINT_FECENTC0 29 /* Interrupt number for FEC */
......@@ -53,6 +54,7 @@
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
#define MCF_IRQ_I2C0 (MCFINT_VECBASE + MCFINT_I2C0)
/*
* SDRAM configuration registers.
......@@ -208,5 +210,11 @@
#define MCFDMA_BASE2 (MCF_IPSBAR + 0x180)
#define MCFDMA_BASE3 (MCF_IPSBAR + 0x1C0)
/*
* I2C module.
*/
#define MCFI2C_BASE0 (MCF_IPSBAR + 0x300)
#define MCFI2C_SIZE0 0x40
/****************************************************************************/
#endif /* m523xsim_h */
......@@ -37,6 +37,7 @@
#define MCFINT_UART0 13 /* Interrupt number for UART0 */
#define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */
#define MCFINT_I2C0 17 /* Interrupt number for I2C */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 23 /* Interrupt number for FEC0 */
#define MCFINT_FECTX0 27 /* Interrupt number for FEC0 */
......@@ -61,6 +62,7 @@
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
#define MCF_IRQ_I2C0 (MCFINT_VECBASE + MCFINT_I2C0)
/*
* SDRAM configuration registers.
......@@ -353,5 +355,11 @@
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
/*
* I2C module.
*/
#define MCFI2C_BASE0 (MCF_IPSBAR + 0x300)
#define MCFI2C_SIZE0 0x40
/****************************************************************************/
#endif /* m527xsim_h */
......@@ -37,6 +37,7 @@
#define MCFINT_UART0 13 /* Interrupt number for UART0 */
#define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */
#define MCFINT_I2C0 17 /* Interrupt number for I2C */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 23 /* Interrupt number for FEC */
#define MCFINT_FECTX0 27 /* Interrupt number for FEC */
......@@ -53,6 +54,8 @@
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
#define MCF_IRQ_I2C0 (MCFINT_VECBASE + MCFINT_I2C0)
/*
* SDRAM configuration registers.
*/
......@@ -242,5 +245,11 @@
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
/*
* I2C module
*/
#define MCFI2C_BASE0 (MCF_IPSBAR + 0x300)
#define MCFI2C_SIZE0 0x40
/****************************************************************************/
#endif /* m528xsim_h */
......@@ -148,6 +148,7 @@
#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
#define MCFSIM_I2CICR MCFSIM_ICR3 /* I2C ICR */
#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
......@@ -155,7 +156,6 @@
#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
/*
* Some symbol defines for the Parallel Port Pin Assignment Register
*/
......@@ -174,10 +174,17 @@
/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_I2C0 29 /* I2C, Level 5 */
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/*
* I2C module
*/
#define MCFI2C_BASE0 (MCF_MBAR + 0x280)
#define MCFI2C_SIZE0 0x40
/****************************************************************************/
#endif /* m5307sim_h */
......@@ -19,6 +19,7 @@
#define MCFINT_UART0 26 /* Interrupt number for UART0 */
#define MCFINT_UART1 27 /* Interrupt number for UART1 */
#define MCFINT_UART2 28 /* Interrupt number for UART2 */
#define MCFINT_I2C0 30 /* Interrupt number for I2C */
#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 36 /* Interrupt number for FEC */
#define MCFINT_FECTX0 40 /* Interrupt number for FEC */
......@@ -32,6 +33,7 @@
#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_I2C0 (MCFINT_VECBASE + MCFINT_I2C0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
#define MCF_WTM_WCR 0xFC098000
......@@ -1237,5 +1239,11 @@
#define MCFEPORT_EPPDR (0xFC094005)
#define MCFEPORT_EPFR (0xFC094006)
/*
* I2C Module
*/
#define MCFI2C_BASE0 (0xFc058000)
#define MCFI2C_SIZE0 0x40
/********************************************************************/
#endif /* m53xxsim_h */
......@@ -112,6 +112,7 @@
#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
#define MCFSIM_I2CICR MCFSIM_ICR3 /* I2C ICR */
#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
......@@ -137,10 +138,17 @@
/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_I2C0 29 /* I2C, Level 5 */
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/*
* I2C module
*/
#define MCFI2C_BASE0 (MCF_MBAR + 0x280)
#define MCFI2C_SIZE0 0x40
/****************************************************************************/
#endif /* m5407sim_h */
......@@ -45,6 +45,7 @@
*/
#define MCF_IRQ_TIMER (MCFINT_VECBASE + 54) /* Slice Timer 0 */
#define MCF_IRQ_PROFILER (MCFINT_VECBASE + 53) /* Slice Timer 1 */
#define MCF_IRQ_I2C0 (MCFINT_VECBASE + 40)
#define MCF_IRQ_UART0 (MCFINT_VECBASE + 35)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + 34)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + 33)
......@@ -107,4 +108,14 @@
#define MCF_PAR_PSC_RTS_RTS (0x30)
#define MCF_PAR_PSC_CANRX (0x40)
#define MCF_PAR_FECI2CIRQ (MCF_MBAR + 0x00000a44) /* FEC/I2C/IRQ */
#define MCF_PAR_FECI2CIRQ_SDA (1 << 3)
#define MCF_PAR_FECI2CIRQ_SCL (1 << 2)
/*
* I2C module.
*/
#define MCFI2C_BASE0 (MCF_MBAR + 0x8f00)
#define MCFI2C_SIZE0 0x40
#endif /* m54xxsim_h */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment