Commit 2d40cd17 authored by Mark Rustad's avatar Mark Rustad Committed by Jeff Kirsher

ixgbe: Add support for SFPs with retimer

Add support for SFPs with an external retimer.
Signed-off-by: default avatarMark Rustad <mark.d.rustad@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent e84db727
......@@ -132,6 +132,7 @@ static const struct pci_device_id ixgbe_pci_tbl[] = {
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_10G_T), board_X550EM_x},
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_SFP), board_X550EM_x},
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_SFP_N), board_x550em_a },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_SFP), board_x550em_a },
/* required last entry */
{0, }
};
......@@ -2681,6 +2682,7 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues,
case ixgbe_mac_X550EM_x:
case ixgbe_mac_x550em_a:
if (adapter->hw.device_id == IXGBE_DEV_ID_X550EM_X_SFP ||
adapter->hw.device_id == IXGBE_DEV_ID_X550EM_A_SFP ||
adapter->hw.device_id == IXGBE_DEV_ID_X550EM_A_SFP_N)
mask |= IXGBE_EIMS_GPI_SDP0(&adapter->hw);
if (adapter->hw.phy.type == ixgbe_phy_x550em_ext_t)
......
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
Copyright(c) 1999 - 2014 Intel Corporation.
Copyright(c) 1999 - 2016 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
......@@ -81,7 +81,11 @@
#define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2
#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3
#define IXGBE_CS4227 0xBE /* CS4227 address */
#define IXGBE_CS4227_GLOBAL_ID_LSB 0
#define IXGBE_CS4227_GLOBAL_ID_MSB 1
#define IXGBE_CS4227_SCRATCH 2
#define IXGBE_CS4223_PHY_ID 0x7003 /* Quad port */
#define IXGBE_CS4227_PHY_ID 0x3003 /* Dual port */
#define IXGBE_CS4227_RESET_PENDING 0x1357
#define IXGBE_CS4227_RESET_COMPLETE 0x5AA5
#define IXGBE_CS4227_RETRIES 15
......
......@@ -1311,6 +1311,7 @@ struct ixgbe_thermal_sensor_data {
/* MDIO definitions */
#define IXGBE_MDIO_ZERO_DEV_TYPE 0x0
#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1
#define IXGBE_MDIO_PCS_DEV_TYPE 0x3
#define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4
......@@ -3580,6 +3581,7 @@ struct ixgbe_info {
#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P) ? 0x8010 : 0x4010)
#define IXGBE_KRM_LINK_CTRL_1(P) ((P) ? 0x820C : 0x420C)
#define IXGBE_KRM_AN_CNTL_1(P) ((P) ? 0x822C : 0x422C)
#define IXGBE_KRM_AN_CNTL_8(P) ((P) ? 0x8248 : 0x4248)
#define IXGBE_KRM_DSP_TXFFE_STATE_4(P) ((P) ? 0x8634 : 0x4634)
#define IXGBE_KRM_DSP_TXFFE_STATE_5(P) ((P) ? 0x8638 : 0x4638)
#define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P) ((P) ? 0x8B00 : 0x4B00)
......@@ -3605,6 +3607,9 @@ struct ixgbe_info {
#define IXGBE_KRM_AN_CNTL_1_SYM_PAUSE (1 << 28)
#define IXGBE_KRM_AN_CNTL_1_ASM_PAUSE (1 << 29)
#define IXGBE_KRM_AN_CNTL_8_LINEAR BIT(0)
#define IXGBE_KRM_AN_CNTL_8_LIMITING BIT(1)
#define IXGBE_KRM_DSP_TXFFE_STATE_C0_EN (1 << 6)
#define IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN (1 << 15)
#define IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN (1 << 16)
......
......@@ -273,6 +273,12 @@ static void ixgbe_check_cs4227(struct ixgbe_hw *hw)
static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
{
switch (hw->device_id) {
case IXGBE_DEV_ID_X550EM_A_SFP:
if (hw->bus.lan_id)
hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
else
hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
return ixgbe_identify_module_generic(hw);
case IXGBE_DEV_ID_X550EM_X_SFP:
/* set up for CS4227 usage */
hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
......@@ -1362,6 +1368,117 @@ ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
return status;
}
/**
* ixgbe_setup_mac_link_sfp_n - Setup internal PHY for native SFP
* @hw: pointer to hardware structure
*
* Configure the the integrated PHY for native SFP support.
*/
static s32
ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed,
__always_unused bool autoneg_wait_to_complete)
{
bool setup_linear = false;
u32 reg_phy_int;
s32 rc;
/* Check if SFP module is supported and linear */
rc = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
/* If no SFP module present, then return success. Return success since
* SFP not present error is not excepted in the setup MAC link flow.
*/
if (rc == IXGBE_ERR_SFP_NOT_PRESENT)
return 0;
if (!rc)
return rc;
/* Configure internal PHY for native SFI */
rc = hw->mac.ops.read_iosf_sb_reg(hw,
IXGBE_KRM_AN_CNTL_8(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY,
&reg_phy_int);
if (rc)
return rc;
if (setup_linear) {
reg_phy_int &= ~IXGBE_KRM_AN_CNTL_8_LIMITING;
reg_phy_int |= IXGBE_KRM_AN_CNTL_8_LINEAR;
} else {
reg_phy_int |= IXGBE_KRM_AN_CNTL_8_LIMITING;
reg_phy_int &= ~IXGBE_KRM_AN_CNTL_8_LINEAR;
}
rc = hw->mac.ops.write_iosf_sb_reg(hw,
IXGBE_KRM_AN_CNTL_8(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY,
reg_phy_int);
if (rc)
return rc;
/* Setup XFI/SFI internal link */
return ixgbe_setup_ixfi_x550em(hw, &speed);
}
/**
* ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP
* @hw: pointer to hardware structure
*
* Configure the the integrated PHY for SFP support.
*/
static s32
ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
__always_unused bool autoneg_wait_to_complete)
{
u32 reg_slice, slice_offset;
bool setup_linear = false;
u16 reg_phy_ext;
s32 rc;
/* Check if SFP module is supported and linear */
rc = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
/* If no SFP module present, then return success. Return success since
* SFP not present error is not excepted in the setup MAC link flow.
*/
if (rc == IXGBE_ERR_SFP_NOT_PRESENT)
return 0;
if (!rc)
return rc;
/* Configure internal PHY for KR/KX. */
ixgbe_setup_kr_speed_x550em(hw, speed);
if (!hw->phy.mdio.prtad || hw->phy.mdio.prtad == 0xFFFF)
return IXGBE_ERR_PHY_ADDR_INVALID;
/* Get external PHY device id */
rc = hw->phy.ops.read_reg(hw, IXGBE_CS4227_GLOBAL_ID_MSB,
IXGBE_MDIO_ZERO_DEV_TYPE, &reg_phy_ext);
if (rc)
return rc;
/* When configuring quad port CS4223, the MAC instance is part
* of the slice offset.
*/
if (reg_phy_ext == IXGBE_CS4223_PHY_ID)
slice_offset = (hw->bus.lan_id +
(hw->bus.instance_id << 1)) << 12;
else
slice_offset = hw->bus.lan_id << 12;
/* Configure CS4227/CS4223 LINE side to proper mode. */
reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + slice_offset;
if (setup_linear)
reg_phy_ext = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
else
reg_phy_ext = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
return hw->phy.ops.write_reg(hw, reg_slice, IXGBE_MDIO_ZERO_DEV_TYPE,
reg_phy_ext);
}
/**
* ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed
* @hw: pointer to hardware structure
......@@ -1456,9 +1573,21 @@ static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
mac->ops.disable_tx_laser = NULL;
mac->ops.enable_tx_laser = NULL;
mac->ops.flap_tx_laser = NULL;
mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em;
mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
mac->ops.setup_fc = ixgbe_setup_fc_x550em;
switch (hw->device_id) {
case IXGBE_DEV_ID_X550EM_A_SFP_N:
mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_n;
break;
case IXGBE_DEV_ID_X550EM_A_SFP:
mac->ops.setup_mac_link =
ixgbe_setup_mac_link_sfp_x550a;
break;
default:
mac->ops.setup_mac_link =
ixgbe_setup_mac_link_sfp_x550em;
break;
}
mac->ops.set_rate_select_speed =
ixgbe_set_soft_rate_select_speed;
break;
......@@ -2253,6 +2382,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
media_type = ixgbe_media_type_backplane;
break;
case IXGBE_DEV_ID_X550EM_X_SFP:
case IXGBE_DEV_ID_X550EM_A_SFP:
case IXGBE_DEV_ID_X550EM_A_SFP_N:
media_type = ixgbe_media_type_fiber;
break;
......@@ -2316,6 +2446,7 @@ static void ixgbe_set_mdio_speed(struct ixgbe_hw *hw)
switch (hw->device_id) {
case IXGBE_DEV_ID_X550EM_X_10G_T:
case IXGBE_DEV_ID_X550EM_A_SFP:
/* Config MDIO clock speed before the first MDIO PHY access */
hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment