Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-fastboot

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-fastboot:
  raid, fastboot: hide RAID autodetect option if MD is compiled as a module
  raid: make RAID autodetect default a KConfig option
  warning: fix init do_mounts_md c
  fastboot: make the RAID autostart code print a message just before waiting
  fastboot: make the raid autodetect code wait for all devices to init
  fastboot: Fix bootgraph.pl initcall name regexp
  fastboot: fix issues and improve output of bootgraph.pl
  Add a script to visualize the kernel boot process / time

drivers/md/Kconfig

@@ -30,6 +30,20 @@ config BLK_DEV_MD
 
 	  If unsure, say N.
 
+config MD_AUTODETECT
+	bool "Autodetect RAID arrays during kernel boot"
+	depends on BLK_DEV_MD=y
+	default y
+	---help---
+	  If you say Y here, then the kernel will try to autodetect raid
+	  arrays as part of its boot process. 
+
+	  If you don't use raid and say Y, this autodetection can cause 
+	  a several-second delay in the boot time due to various
+	  synchronisation steps that are part of this step.
+
+	  If unsure, say Y.
+
 config MD_LINEAR
 	tristate "Linear (append) mode"
 	depends on BLK_DEV_MD

init/do_mounts_md.c

@@ -12,7 +12,12 @@
  * The code for that is here.
  */
 
-static int __initdata raid_noautodetect, raid_autopart;
+#ifdef CONFIG_MD_AUTODETECT
+static int __initdata raid_noautodetect;
+#else
+static int __initdata raid_noautodetect=1;
+#endif
+static int __initdata raid_autopart;
 
 static struct {
 	int minor;
@@ -252,6 +257,8 @@ static int __init raid_setup(char *str)
 
 		if (!strncmp(str, "noautodetect", wlen))
 			raid_noautodetect = 1;
+		if (!strncmp(str, "autodetect", wlen))
+			raid_noautodetect = 0;
 		if (strncmp(str, "partitionable", wlen)==0)
 			raid_autopart = 1;
 		if (strncmp(str, "part", wlen)==0)
@@ -264,17 +271,32 @@ static int __init raid_setup(char *str)
 __setup("raid=", raid_setup);
 __setup("md=", md_setup);
 
+static void autodetect_raid(void)
+{
+	int fd;
+
+	/*
+	 * Since we don't want to detect and use half a raid array, we need to
+	 * wait for the known devices to complete their probing
+	 */
+	printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n");
+	printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n");
+	while (driver_probe_done() < 0)
+		msleep(100);
+	fd = sys_open("/dev/md0", 0, 0);
+	if (fd >= 0) {
+		sys_ioctl(fd, RAID_AUTORUN, raid_autopart);
+		sys_close(fd);
+	}
+}
+
 void __init md_run_setup(void)
 {
 	create_dev("/dev/md0", MKDEV(MD_MAJOR, 0));
+
 	if (raid_noautodetect)
-		printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=noautodetect)\n");
-	else {
-		int fd = sys_open("/dev/md0", 0, 0);
-		if (fd >= 0) {
-			sys_ioctl(fd, RAID_AUTORUN, raid_autopart);
-			sys_close(fd);
-		}
-	}
+		printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=autodetect will force)\n");
+	else
+		autodetect_raid();
 	md_setup_drive();
 }

init/main.c

@@ -708,7 +708,7 @@ int do_one_initcall(initcall_t fn)
 	int result;
 
 	if (initcall_debug) {
-		printk("calling  %pF\n", fn);
+		printk("calling  %pF @ %i\n", fn, task_pid_nr(current));
 		t0 = ktime_get();
 	}
 

scripts/bootgraph.pl

+#!/usr/bin/perl
+
+# Copyright 2008, Intel Corporation
+#
+# This file is part of the Linux kernel
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+# Authors:
+# 	Arjan van de Ven <arjan@linux.intel.com>
+
+
+#
+# This script turns a dmesg output into a SVG graphic that shows which
+# functions take how much time. You can view SVG graphics with various
+# programs, including Inkscape, The Gimp and Firefox.
+#
+#
+# For this script to work, the kernel needs to be compiled with the
+# CONFIG_PRINTK_TIME configuration option enabled, and with
+# "initcall_debug" passed on the kernel command line.
+#
+# usage:
+# 	dmesg | perl scripts/bootgraph.pl > output.svg
+#
+
+my @rows;
+my %start, %end, %row;
+my $done = 0;
+my $rowcount = 0;
+my $maxtime = 0;
+my $firsttime = 100;
+my $count = 0;
+while (<>) {
+	my $line = $_;
+	if ($line =~ /([0-9\.]+)\] calling  ([a-zA-Z0-9\_]+)\+/) {
+		my $func = $2;
+		if ($done == 0) {
+			$start{$func} = $1;
+			if ($1 < $firsttime) {
+				$firsttime = $1;
+			}
+		}
+		$row{$func} = 1;
+		if ($line =~ /\@ ([0-9]+)/) {
+			my $pid = $1;
+			if (!defined($rows[$pid])) {
+				$rowcount = $rowcount + 1;
+				$rows[$pid] = $rowcount;
+			}
+			$row{$func} = $rows[$pid];
+		}
+		$count = $count + 1;
+	}
+
+	if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_]+)\+.*returned/) {
+		if ($done == 0) {
+			$end{$2} = $1;
+			$maxtime = $1;
+		}
+	}
+	if ($line =~ /Write protecting the/) {
+		$done = 1;
+	}
+	if ($line =~ /Freeing unused kernel memory/) {
+		$done = 1;
+	}
+}
+
+if ($count == 0) {
+	print "No data found in the dmesg. Make sure that 'printk.time=1' and\n";
+	print "'initcall_debug' are passed on the kernel command line.\n\n";
+	print "Usage: \n";
+	print "      dmesg | perl scripts/bootgraph.pl > output.svg\n\n";
+	exit;
+}
+
+print "<?xml version=\"1.0\" standalone=\"no\"?> \n";
+print "<svg width=\"1000\" height=\"100%\" version=\"1.1\" xmlns=\"http://www.w3.org/2000/svg\">\n";
+
+my @styles;
+
+$styles[0] = "fill:rgb(0,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[1] = "fill:rgb(0,255,0);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[2] = "fill:rgb(255,0,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[3] = "fill:rgb(255,255,20);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[4] = "fill:rgb(255,0,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[5] = "fill:rgb(0,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[6] = "fill:rgb(0,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[7] = "fill:rgb(0,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[8] = "fill:rgb(255,0,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[9] = "fill:rgb(255,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[10] = "fill:rgb(255,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+$styles[11] = "fill:rgb(128,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
+
+my $mult = 950.0 / ($maxtime - $firsttime);
+my $threshold = ($maxtime - $firsttime) / 60.0;
+my $stylecounter = 0;
+while (($key,$value) = each %start) {
+	my $duration = $end{$key} - $start{$key};
+
+	if ($duration >= $threshold) {
+		my $s, $s2, $e, $y;
+		$s = ($value - $firsttime) * $mult;
+		$s2 = $s + 6;
+		$e = ($end{$key} - $firsttime) * $mult;
+		$w = $e - $s;
+
+		$y = $row{$key} * 150;
+		$y2 = $y + 4;
+
+		$style = $styles[$stylecounter];
+		$stylecounter = $stylecounter + 1;
+		if ($stylecounter > 11) {
+			$stylecounter = 0;
+		};
+
+		print "<rect x=\"$s\" width=\"$w\" y=\"$y\" height=\"145\" style=\"$style\"/>\n";
+		print "<text transform=\"translate($s2,$y2) rotate(90)\">$key</text>\n";
+	}
+}
+
+
+# print the time line on top
+my $time = $firsttime;
+my $step = ($maxtime - $firsttime) / 15;
+while ($time < $maxtime) {
+	my $s2 = ($time - $firsttime) * $mult;
+	my $tm = int($time * 100) / 100.0;
+	print "<text transform=\"translate($s2,89) rotate(90)\">$tm</text>\n";
+	$time = $time + $step;
+}
+
+print "</svg>\n";