Add support for using a MAX3421E chip as a host driver.

Signed-off-by: David Mosberger <davidm@egauge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_USB_IMX21_HCD)	+= host/
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= host/
 obj-$(CONFIG_USB_FUSBH200_HCD)	+= host/
 obj-$(CONFIG_USB_FOTG210_HCD)	+= host/
+obj-$(CONFIG_USB_MAX3421_HCD)	+= host/
 
 obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
 

drivers/usb/host/Kconfig

@@ -342,6 +342,17 @@ config USB_FOTG210_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called fotg210-hcd.
 
+config USB_MAX3421_HCD
+	tristate "MAX3421 HCD (USB-over-SPI) support"
+	depends on USB && SPI
+	---help---
+	  The Maxim MAX3421E chip supports standard USB 2.0-compliant
+	  full-speed devices either in host or peripheral mode.  This
+	  driver supports the host-mode of the MAX3421E only.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called max3421-hcd.
+
 config USB_OHCI_HCD
 	tristate "OHCI HCD (USB 1.1) support"
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3

drivers/usb/host/Makefile

@@ -70,3 +70,4 @@ obj-$(CONFIG_USB_HCD_BCMA)	+= bcma-hcd.o
 obj-$(CONFIG_USB_HCD_SSB)	+= ssb-hcd.o
 obj-$(CONFIG_USB_FUSBH200_HCD)	+= fusbh200-hcd.o
 obj-$(CONFIG_USB_FOTG210_HCD)	+= fotg210-hcd.o
+obj-$(CONFIG_USB_MAX3421_HCD)	+= max3421-hcd.o

include/linux/platform_data/max3421-hcd.h

+/*
+ * Copyright (c) 2014 eGauge Systems LLC
+ *	Contributed by David Mosberger-Tang <davidm@egauge.net>
+ *
+ * Platform-data structure for MAX3421 USB HCD driver.
+ *
+ */
+#ifndef MAX3421_HCD_PLAT_H_INCLUDED
+#define MAX3421_HCD_PLAT_H_INCLUDED
+
+/*
+ * This structure defines the mapping of certain auxiliary functions to the
+ * MAX3421E GPIO pins.  The chip has eight GP inputs and eight GP outputs.
+ * A value of 0 indicates that the pin is not used/wired to anything.
+ *
+ * At this point, the only control the max3421-hcd driver cares about is
+ * to control Vbus (5V to the peripheral).
+ */
+struct max3421_hcd_platform_data {
+	u8 vbus_gpout;			/* pin controlling Vbus */
+};
+
+#endif /* MAX3421_HCD_PLAT_H_INCLUDED */