[ARM] pata_pxa: DMA-capable PATA driver

This patch adds a driver for a harddrive attached to PXA address and data bus.
Unlike pata_platform, this driver allows usage of PXA DMA controller, making the
transmission speed 3x higher.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

arch/arm/mach-pxa/include/mach/pata_pxa.h

+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef	__MACH_PATA_PXA_H__
+#define	__MACH_PATA_PXA_H__
+
+struct pata_pxa_pdata {
+	/* PXA DMA DREQ<0:2> pin */
+	uint32_t	dma_dreq;
+	/* Register shift */
+	uint32_t	reg_shift;
+	/* IRQ flags */
+	uint32_t	irq_flags;
+};
+
+#endif	/* __MACH_PATA_PXA_H__ */

drivers/ata/Kconfig

@@ -642,6 +642,17 @@ config PATA_VIA
 
 	  If unsure, say N.
 
+config PATA_PXA
+	tristate "PXA DMA-capable PATA support"
+	depends on ARCH_PXA
+	help
+	  This option enables support for harddrive attached to PXA CPU's bus.
+
+	  NOTE: This driver utilizes PXA DMA controller, in case your hardware
+	        is not capable of doing MWDMA, use pata_platform instead.
+
+	  If unsure, say N.
+
 config PATA_WINBOND
 	tristate "Winbond SL82C105 PATA support"
 	depends on PCI

drivers/ata/Makefile

@@ -89,6 +89,8 @@ obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
 obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
 obj-$(CONFIG_PATA_WINBOND_VLB)	+= pata_winbond.o
 
+obj-$(CONFIG_PATA_PXA)		+= pata_pxa.o
+
 # Should be last but two libata driver
 obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
 # Should be last but one libata driver