Commit 2dd8075d authored by Enric Balletbo i Serra's avatar Enric Balletbo i Serra Committed by Chun-Kuang Hu

drm/mediatek: mtk_dsi: Use the drm_panel_bridge API

Replace the manual panel handling code by a drm_panel_bridge. This
simplifies the driver and allows all components in the display pipeline
to be treated as bridges, paving the way to generic connector handling.
Signed-off-by: default avatarEnric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
Signed-off-by: default avatarChun-Kuang Hu <chunkuang.hu@kernel.org>
parent 45880ff0
......@@ -182,8 +182,6 @@ struct mtk_dsi {
struct mipi_dsi_host host;
struct drm_encoder encoder;
struct drm_bridge bridge;
struct drm_connector conn;
struct drm_panel *panel;
struct drm_bridge *next_bridge;
struct phy *phy;
......@@ -212,11 +210,6 @@ static inline struct mtk_dsi *bridge_to_dsi(struct drm_bridge *b)
return container_of(b, struct mtk_dsi, bridge);
}
static inline struct mtk_dsi *connector_to_dsi(struct drm_connector *c)
{
return container_of(c, struct mtk_dsi, conn);
}
static inline struct mtk_dsi *host_to_dsi(struct mipi_dsi_host *h)
{
return container_of(h, struct mtk_dsi, host);
......@@ -679,16 +672,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
mtk_dsi_lane0_ulp_mode_leave(dsi);
mtk_dsi_clk_hs_mode(dsi, 0);
if (dsi->panel) {
if (drm_panel_prepare(dsi->panel)) {
DRM_ERROR("failed to prepare the panel\n");
goto err_disable_digital_clk;
}
}
return 0;
err_disable_digital_clk:
clk_disable_unprepare(dsi->digital_clk);
err_disable_engine_clk:
clk_disable_unprepare(dsi->engine_clk);
err_phy_power_off:
......@@ -715,15 +699,7 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
*/
mtk_dsi_stop(dsi);
if (!mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) {
if (dsi->panel) {
if (drm_panel_unprepare(dsi->panel)) {
DRM_ERROR("failed to unprepare the panel\n");
return;
}
}
}
mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500);
mtk_dsi_reset_engine(dsi);
mtk_dsi_lane0_ulp_mode_enter(dsi);
mtk_dsi_clk_ulp_mode_enter(dsi);
......@@ -754,19 +730,7 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
mtk_dsi_start(dsi);
if (dsi->panel) {
if (drm_panel_enable(dsi->panel)) {
DRM_ERROR("failed to enable the panel\n");
goto err_dsi_power_off;
}
}
dsi->enabled = true;
return;
err_dsi_power_off:
mtk_dsi_stop(dsi);
mtk_dsi_poweroff(dsi);
}
static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
......@@ -774,34 +738,19 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
if (!dsi->enabled)
return;
if (dsi->panel) {
if (drm_panel_disable(dsi->panel)) {
DRM_ERROR("failed to disable the panel\n");
return;
}
}
mtk_dsi_poweroff(dsi);
dsi->enabled = false;
}
static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi);
static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi);
static int mtk_dsi_bridge_attach(struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags)
{
struct mtk_dsi *dsi = bridge_to_dsi(bridge);
return mtk_dsi_create_conn_enc(bridge->dev, dsi);
}
static void mtk_dsi_bridge_detach(struct drm_bridge *bridge)
{
struct mtk_dsi *dsi = bridge_to_dsi(bridge);
mtk_dsi_destroy_conn_enc(dsi);
/* Attach the panel or bridge to the dsi bridge */
return drm_bridge_attach(bridge->encoder, dsi->next_bridge,
&dsi->bridge, flags);
}
static void mtk_dsi_bridge_mode_set(struct drm_bridge *bridge,
......@@ -827,101 +776,13 @@ static void mtk_dsi_bridge_enable(struct drm_bridge *bridge)
mtk_output_dsi_enable(dsi);
}
static int mtk_dsi_connector_get_modes(struct drm_connector *connector)
{
struct mtk_dsi *dsi = connector_to_dsi(connector);
return drm_panel_get_modes(dsi->panel, connector);
}
static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = {
.attach = mtk_dsi_bridge_attach,
.detach = mtk_dsi_bridge_detach,
.disable = mtk_dsi_bridge_disable,
.enable = mtk_dsi_bridge_enable,
.mode_set = mtk_dsi_bridge_mode_set,
};
static const struct drm_connector_funcs mtk_dsi_connector_funcs = {
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = drm_connector_cleanup,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static const struct drm_connector_helper_funcs
mtk_dsi_connector_helper_funcs = {
.get_modes = mtk_dsi_connector_get_modes,
};
static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi)
{
int ret;
ret = drm_connector_init(drm, &dsi->conn, &mtk_dsi_connector_funcs,
DRM_MODE_CONNECTOR_DSI);
if (ret) {
DRM_ERROR("Failed to connector init to drm\n");
return ret;
}
drm_connector_helper_add(&dsi->conn, &mtk_dsi_connector_helper_funcs);
dsi->conn.dpms = DRM_MODE_DPMS_OFF;
drm_connector_attach_encoder(&dsi->conn, &dsi->encoder);
if (dsi->panel) {
ret = drm_panel_attach(dsi->panel, &dsi->conn);
if (ret) {
DRM_ERROR("Failed to attach panel to drm\n");
goto err_connector_cleanup;
}
}
return 0;
err_connector_cleanup:
drm_connector_cleanup(&dsi->conn);
return ret;
}
static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
{
int ret;
/* If there's a next bridge, attach to it and let it create the connector */
if (dsi->next_bridge) {
ret = drm_bridge_attach(&dsi->encoder, dsi->next_bridge, NULL,
0);
if (ret) {
DRM_ERROR("Failed to attach bridge to drm\n");
goto err_encoder_cleanup;
}
} else {
/* Otherwise create our own connector and attach to a panel */
ret = mtk_dsi_create_connector(drm, dsi);
if (ret)
goto err_encoder_cleanup;
}
return 0;
err_encoder_cleanup:
drm_encoder_cleanup(&dsi->encoder);
return ret;
}
static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi)
{
drm_encoder_cleanup(&dsi->encoder);
/* Skip connector cleanup if creation was delegated to the bridge */
if (dsi->conn.dev)
drm_connector_cleanup(&dsi->conn);
if (dsi->panel)
drm_panel_detach(dsi->panel);
}
static void mtk_dsi_ddp_start(struct mtk_ddp_comp *comp)
{
struct mtk_dsi *dsi = container_of(comp, struct mtk_dsi, ddp_comp);
......@@ -950,20 +811,6 @@ static int mtk_dsi_host_attach(struct mipi_dsi_host *host,
dsi->format = device->format;
dsi->mode_flags = device->mode_flags;
if (dsi->conn.dev)
drm_helper_hpd_irq_event(dsi->conn.dev);
return 0;
}
static int mtk_dsi_host_detach(struct mipi_dsi_host *host,
struct mipi_dsi_device *device)
{
struct mtk_dsi *dsi = host_to_dsi(host);
if (dsi->conn.dev)
drm_helper_hpd_irq_event(dsi->conn.dev);
return 0;
}
......@@ -1107,7 +954,6 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,
static const struct mipi_dsi_host_ops mtk_dsi_ops = {
.attach = mtk_dsi_host_attach,
.detach = mtk_dsi_host_detach,
.transfer = mtk_dsi_host_transfer,
};
......@@ -1182,6 +1028,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
{
struct mtk_dsi *dsi;
struct device *dev = &pdev->dev;
struct drm_panel *panel;
struct resource *regs;
int irq_num;
int comp_id;
......@@ -1200,10 +1047,18 @@ static int mtk_dsi_probe(struct platform_device *pdev)
}
ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
&dsi->panel, &dsi->next_bridge);
&panel, &dsi->next_bridge);
if (ret)
goto err_unregister_host;
if (panel) {
dsi->next_bridge = devm_drm_panel_bridge_add(dev, panel);
if (IS_ERR(dsi->next_bridge)) {
ret = PTR_ERR(dsi->next_bridge);
goto err_unregister_host;
}
}
dsi->driver_data = of_device_get_match_data(dev);
dsi->engine_clk = devm_clk_get(dev, "engine");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment