Commit 2e3ee9f4 authored by Tony Lindgren's avatar Tony Lindgren

ARM: OMAP1: Move most of plat/io.h into local iomap.h

There's no need to have these in plat/io.h.

While at it, clean up the includes to group them
like they typically are grouped.
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 63325ff2
......@@ -15,11 +15,12 @@
#include <linux/linkage.h>
#include <plat/io.h>
#include <plat/board-ams-delta.h>
#include <mach/ams-delta-fiq.h>
#include "iomap.h"
/*
* GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
* Unfortunately, those were not placed in a separate header file.
......
......@@ -22,6 +22,7 @@
#include <plat/board-ams-delta.h>
#include <asm/fiq.h>
#include <mach/ams-delta-fiq.h>
static struct fiq_handler fh = {
......
......@@ -20,25 +20,27 @@
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/export.h>
#include <linux/io.h>
#include <media/soc_camera.h>
#include <asm/serial.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/io.h>
#include <plat/board-ams-delta.h>
#include <plat/keypad.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include "common.h"
#include <mach/camera.h>
#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>
#include <mach/camera.h>
#include "iomap.h"
#include "common.h"
static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;
......
......@@ -22,7 +22,6 @@
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -32,9 +31,13 @@
#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/board.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
/* fsample is pretty close to p2-sample */
#define fsample_cpld_read(reg) __raw_readb(reg)
......
......@@ -31,8 +31,6 @@
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -43,9 +41,11 @@
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/flash.h>
#include <mach/hardware.h>
#include "common.h"
#include "board-h2.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
......
......@@ -33,21 +33,21 @@
#include <asm/setup.h>
#include <asm/page.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/irqs.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/dma.h>
#include "common.h"
#include <plat/flash.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include "common.h"
#include "board-h3.h"
/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
......
......@@ -27,7 +27,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
......@@ -41,7 +41,6 @@
#include <asm/mach/arch.h>
#include <plat/omap7xx.h>
#include "common.h"
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/usb.h>
......@@ -49,7 +48,7 @@
#include <mach/irqs.h>
#include <linux/delay.h>
#include "common.h"
/* LCD register definition */
#define OMAP_LCDC_CONTROL (0xfffec000 + 0x00)
......
......@@ -26,7 +26,6 @@
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -37,9 +36,13 @@
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/mmc.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define INNOVATOR1610_ETHR_START 0x04000300
......
......@@ -21,7 +21,6 @@
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -30,12 +29,15 @@
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/hwa742.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
#include <plat/clock.h>
#include <mach/hardware.h>
#include "common.h"
#define ADS7846_PENDOWN_GPIO 15
static const unsigned int nokia770_keymap[] = {
......
......@@ -34,15 +34,11 @@
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/smc91x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c/tps65010.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -51,6 +47,9 @@
#include <plat/usb.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <mach/hardware.h>
#include "common.h"
/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
......
......@@ -28,7 +28,6 @@
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -41,6 +40,9 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include <mach/hardware.h>
#include "common.h"
#define PALMTE_USBDETECT_GPIO 0
......
......@@ -24,8 +24,9 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -39,10 +40,10 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include "common.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include "common.h"
#define PALMTT_USBDETECT_GPIO 0
#define PALMTT_CABLE_GPIO 1
......
......@@ -27,8 +27,9 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -41,10 +42,10 @@
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
#include "common.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include "common.h"
#define PALMZ71_USBDETECT_GPIO 0
#define PALMZ71_PENIRQ_GPIO 6
......
......@@ -22,7 +22,6 @@
#include <linux/input.h>
#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -32,9 +31,13 @@
#include <plat/fpga.h>
#include <plat/flash.h>
#include <plat/keypad.h>
#include "common.h"
#include <plat/board.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
static const unsigned int p2_keymap[] = {
KEY(0, 0, KEY_UP),
KEY(1, 0, KEY_RIGHT),
......
......@@ -28,7 +28,6 @@
#include <linux/errno.h>
#include <linux/export.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -40,10 +39,13 @@
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/board.h>
#include "common.h"
#include <plat/keypad.h>
#include <plat/board-sx1.h>
#include <mach/hardware.h>
#include "common.h"
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
{
......
......@@ -27,18 +27,20 @@
#include <linux/smc91x.h>
#include <linux/export.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board-voiceblue.h>
#include "common.h"
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <mach/hardware.h>
#include "common.h"
static struct plat_serial8250_port voiceblue_ports[] = {
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
......
......@@ -16,7 +16,6 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clkdev.h>
#include <asm/mach-types.h>
......@@ -27,6 +26,7 @@
#include <plat/sram.h>
#include <plat/clkdev_omap.h>
#include "iomap.h"
#include "clock.h"
#include "opp.h"
......
......@@ -18,7 +18,6 @@
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/mach-types.h> /* for machine_is_* */
......@@ -28,6 +27,7 @@
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include <plat/usb.h> /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
......
......@@ -15,14 +15,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <mach/camera.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
#include "common.h"
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
......@@ -30,6 +26,10 @@
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
#include <mach/camera.h>
#include <mach/hardware.h>
#include "common.h"
#include "clock.h"
/*-------------------------------------------------------------------------*/
......
......@@ -19,11 +19,11 @@
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/io.h>
#include <plat/dma.h>
#include <plat/tc.h>
......
......@@ -6,10 +6,10 @@
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <plat/io.h>
#include <plat/tc.h>
#include <plat/flash.h>
......
......@@ -24,12 +24,15 @@
#include <linux/errno.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <plat/fpga.h>
#include <mach/hardware.h>
#include "iomap.h"
static void fpga_mask_irq(struct irq_data *d)
{
unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
......
......@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <plat/cpu.h>
#define OMAP_DIE_ID_0 0xfffe1800
......
......@@ -9,10 +9,12 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
#include <mach/io.h>
#include <mach/irqs.h>
#include <asm/hardware/gic.h>
#include "../../iomap.h"
.macro disable_fiq
.endm
......
......@@ -15,9 +15,12 @@
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include "iomap.h"
#include "common.h"
#include "clock.h"
extern void omap_check_revision(void);
......
/*
* IO mappings for OMAP1
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifdef __ASSEMBLER__
#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
#endif
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
* ----------------------------------------------------------------------------
*/
#define OMAP1_IO_PHYS 0xFFFB0000
#define OMAP1_IO_SIZE 0x40000
#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
......@@ -42,11 +42,13 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <plat/cpu.h>
#include <mach/hardware.h>
#define IRQ_BANK(irq) ((irq) >> 5)
#define IRQ_BIT(irq) ((irq) & 0x1f)
......
......@@ -27,9 +27,10 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <plat/dma.h>
#include <mach/hardware.h>
#include <mach/lcdc.h>
#include <plat/dma.h>
int omap_lcd_dma_running(void)
{
......
......@@ -19,12 +19,15 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <mach/irqs.h>
#include <plat/dma.h>
#include <plat/mux.h>
#include <plat/cpu.h>
#include <plat/mcbsp.h>
#include <mach/irqs.h>
#include "iomap.h"
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
......
......@@ -42,14 +42,13 @@
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/atomic.h>
#include <asm/irq.h>
#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <plat/cpu.h>
#include <mach/irqs.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/tc.h>
......@@ -57,6 +56,9 @@
#include <plat/dma.h>
#include <plat/dmtimer.h>
#include <mach/irqs.h>
#include "iomap.h"
#include "pm.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
......
......@@ -4,9 +4,10 @@
#include <linux/kernel.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <plat/prcm.h>
#include <mach/hardware.h>
void omap1_restart(char mode, const char *cmd)
{
/*
......
......@@ -33,8 +33,12 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
#include "iomap.h"
#include "pm.h"
.text
......
......@@ -9,10 +9,14 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
#include <mach/hardware.h>
#include "iomap.h"
.text
/*
......
......@@ -45,14 +45,15 @@
#include <linux/io.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include "iomap.h"
#include "common.h"
#ifdef CONFIG_OMAP_MPU_TIMER
......
......@@ -47,14 +47,17 @@
#include <linux/io.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include "common.h"
#include <plat/dmtimer.h>
#include <mach/hardware.h>
#include "common.h"
/*
* ---------------------------------------------------------------------------
* 32KHz OS timer
......
......@@ -60,9 +60,6 @@
#define IOMEM(x) ((void __force __iomem *)(x))
#endif
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
#define OMAP2_L3_IO_OFFSET 0x90000000
#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
......@@ -85,16 +82,6 @@
#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
* ----------------------------------------------------------------------------
*/
#define OMAP1_IO_PHYS 0xFFFB0000
#define OMAP1_IO_SIZE 0x40000
#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
/*
* ----------------------------------------------------------------------------
* Omap2 specific IO mapping
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment