ARM: S5PV210: Add GONI board support

This is for samsung GONI board using s5pc110.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

arch/arm/mach-s5pv210/Kconfig

@@ -51,6 +51,14 @@ config S5PV210_SETUP_SDHCI_GPIO
 	help
 	  Common setup code for SDHCI gpio.
 
+config MACH_GONI
+	bool "GONI"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Machine support for Samsung GONI board
+	  S5PC110(MCP) is one of package option of S5PV210
+
 config MACH_SMDKV210
 	bool "SMDKV210"
 	select CPU_S5PV210

arch/arm/mach-s5pv210/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
 obj-$(CONFIG_MACH_AQUILA)	+= mach-aquila.o
 obj-$(CONFIG_MACH_SMDKV210)	+= mach-smdkv210.o
 obj-$(CONFIG_MACH_SMDKC110)	+= mach-smdkc110.o
+obj-$(CONFIG_MACH_GONI)		+= mach-goni.o
 
 # device support
 

arch/arm/mach-s5pv210/mach-goni.c

+/* linux/arch/arm/mach-s5pv210/mach-goni.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *goni_devices[] __initdata = {
+};
+
+static void __init goni_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
+}
+
+static void __init goni_machine_init(void)
+{
+	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
+}
+
+MACHINE_START(GONI, "GONI")
+	/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= goni_map_io,
+	.init_machine	= goni_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END